View source for Gauss's lemma (polynomial)

{{see also|Langmuir adsorption model}}
{{unreferenced|date=October 2012}}
[[Image:Langmuir isotherm2.jpg|right|thumb|Langmuir isotherm. Value of constant increases from blue, red, green and brown]]
The '''Langmuir equation''' (also known as the '''Langmuir isotherm''', '''Langmuir adsorption equation''' or '''Hill-Langmuir equation''') relates the coverage or [[adsorption]] of molecules on a solid surface to [[gas pressure]] or [[concentration]] of a medium above the solid surface at a fixed temperature. The equation was developed by [[Irving Langmuir]] in 1916.  The equation is stated as:

:<math> \theta  =\frac{\alpha \cdot P}{1+\alpha \cdot P}</math> 

'''[[theta (letter)|θ]]'''  is the fractional coverage of the surface, '''P''' is the gas pressure or concentration, '''[[alpha|α]]''' is a constant.

The constant α is the '''Langmuir adsorption constant''' and increases with an increase in the binding energy of adsorption and with a decrease in temperature.

== Equation Derivation ==
The Langmuir equation is derived starting from the [[Chemical equilibrium|equilibrium]] between empty surface sites (<math>S^*</math>), particles (<math>P</math>) and filled particle sites (<math>SP</math>)
:<math> S^* + P  \rightleftharpoons  SP</math>

The [[equilibrium constant]] <math>K</math> is thus given by the equation:
:<math> K  =\frac{[SP]}{[S^*][P]}</math>

Because the number of filled surface sites (<math>SP</math>) is proportional to θ, the number of unfilled sites (<math>S^*</math>) is proportional to 1-θ, and the number of particles is proportional to the gas pressure or concentration (p), the equation can be rewritten as:
:<math> \alpha  =\frac{\theta}{(1-\theta)p}</math>
where <math>\alpha</math> is a constant.

Rearranging this as follows:
:<math> \theta  = \alpha(1-\theta)p</math>
:<math> \theta = p\alpha  - p\theta\alpha </math>
:<math> \theta  + p\theta\alpha = p\alpha</math>
:<math> \theta (1 + p\alpha) = p\alpha</math>

leads to Langmuir equation:
:<math> \theta  =\frac{\alpha \cdot p}{1+\alpha \cdot p}</math> 

Other equations relating to adsorption exist, such as the Temkin equation or the [[Freundlich equation]]. The Langmuir equation (as a relationship between the concentration of a compound [[adsorption|adsorbing]] to binding sites and the fractional occupancy of the binding sites) is equivalent to the [[Hill equation (biochemistry)]].

==Statistical Derivation==

Langmuir isotherm can also be derived using statistical mechanics with the following assumptions:<br />
1. Suppose there are ''M'' active sites to which ''N'' particles bind.<br /> 
2. An active site can be occupied only by one particle.<br />
3. Active sites are independent. Probability of one site being occupied is not dependent on the status of adjacent sites.

The partition function for a system of ''N'' particles adsorbed to ''M'' sites (under the assumption that there are more sites than the particles) is:

:<math> Q(N,M,T)=\frac{M!}{N!(M-N)!}(q\lambda)^N</math>

with ''<math> q\lambda</math>'' being the distribution function for one particle:

:<math> q=q_v(T)^3 </math> and <math>\lambda=e^{\beta \mu}</math>.

If we allow the number of particles to increase so that all sites are occupied, the partition function becomes (using the binomial theorem in the last step):

:<math> \Xi(\mu,M,T) = \sum_{N=0}^M Q(N,M,T)= \sum_{N=0}^M \binom{M}{N} (q\lambda)^N=(1+q\lambda)^M</math>

We can see that this partition function of a single active state can be expressed as

:<math>\xi = 1+q\lambda</math>.

The average number of occupied spaces can now be easily calculated.

:<math>\langle N \rangle=\frac{\partial{\ln{\Xi(\mu,M,T)}}}{\partial{\beta \mu}}=M\frac{\partial{\ln{\xi(\mu,M,T)}}}{\partial{\beta \mu}}</math>

Rearranging yields

:<math> \langle s \rangle=\frac{<N>}{M}=\frac{\partial{\ln{\xi(T)}}}{\partial{\beta \mu}}=\lambda\frac{\partial\ln{\xi(T)}}{\partial\lambda}</math>

And finally:

:<math> \langle s \rangle=\frac{q\lambda}{1+q\lambda}</math>

== Equation Fitting ==
The Langmuir equation is expressed here as:

:<math> {\Gamma} = \Gamma_{max} \frac{K c}{1 + K c}</math>

where K = Langmuir equilibrium constant, c = aqueous concentration (or gaseous partial pressure), &Gamma; = amount adsorbed, and &Gamma;<sub>max</sub> = maximum amount adsorbed as c increases.

The equilibrium constant is actually given by <math>\Gamma_{max}</math>:<br>
:<math> {\Gamma(c=K^{-1})} = \Gamma_{max} \frac{K K^{-1}}{1 + K K^{-1}} = \frac{\Gamma_{max}}{2}</math>

The Langmuir equation can be fitted to data by linear regression and nonlinear regression methods. 
Commonly used linear regression methods are: [[Lineweaver–Burk plot|Lineweaver–Burk]], Eadie-Hofstee, Scatchard, and Langmuir.

The double reciprocal of the Langmuir equation yields the Lineweaver-Burk equation:

:<math> \frac{1}{\Gamma} = \frac{1}{\Gamma_{max}} + \frac{1}{\Gamma_{max}Kc}</math>

A plot of (1/&Gamma;) versus (1/c) yields a slope = 1/(&Gamma;<sub>max</sub>K) and an intercept = 1/&Gamma;<sub>max</sub>. 
The Lineweaver-Burk regression is very sensitive to data error and it is strongly biased toward fitting the 
data in the low concentration range. It was proposed in 1934. Another common linear form of the Langmuir equation
is the Eadie-Hofstee equation:

:<math> \Gamma = \Gamma_{max} - \frac{\Gamma}{Kc}</math>

A plot of (&Gamma;) versus (&Gamma;/c) yields a slope = -1/K and an intercept = &Gamma;<sub>max</sub>.
The Eadie-Hofstee regression has some bias toward fitting the data in the low concentration range.
It was proposed in 1942 and 1952.
Another rearrangement yields the Scatchard regression:

:<math> \frac{\Gamma}{c} = K\Gamma_{max} - K\Gamma</math>

A plot of (&Gamma;/c) versus (&Gamma;) yields a slope = -K and an intercept = K&Gamma;<sub>max</sub>.
The Scatchard regression is biased toward fitting the data in the high concentration range. 
It was proposed in 1949.
Note that if you invert the ''x'' and ''y'' axes, then this regression would convert into the Eadie-Hofstee regression
discussed earlier. The last linear regression commonly used is the Langmuir linear regression proposed by
Langmuir himself in 1918:

:<math> \frac{c}{\Gamma} = \frac{c}{\Gamma_{max}} + \frac{1}{K\Gamma_{max}}</math>

A plot of (c/&Gamma;) versus (c) yields a slope = 1/&Gamma;<sub>max</sub> and an intercept = 1/(K&Gamma;<sub>max</sub>).
This regression is often erroneously called the Hanes-Woolf regression. The Hanes-Woolf regression was proposed in 1932 and 1957 for fitting the Michaelis-Menten equation, which is similar in form to the Langmuir equation. Nevertheless, Langmuir proposed this linear regression technique in 1918, and it should be referred to as the ''Langmuir linear regression'' when applied to adsorption isotherms. The Langmuir regression has very little sensitivity to data error. It has some bias toward fitting the data in the middle and high concentration range.

There are two kinds of nonlinear least squares (NLLS) regression techniques that can be used to fit the Langmuir equation to a data set. They differ only on how the goodness-of-fit is defined. In the v-NLLS regression method, the best goodness-of-fit is defined as the curve with the smallest ''vertical'' error between the fitted curve and the data. In the n-NLLS regression method, the best goodness-of-fit is defined as the curve with the smallest ''normal'' error between the fitted curve and the data. Using the vertical error is the most common form of NLLS regression criteria. Definitions based on the normal error are less common. The normal error is the error of the datum point to the nearest point on the fitted curve. It is called the normal error because the trajectory is normal (that is, perpendicular) to the curve.

It is a common misconception to think that NLLS regression methods are free of bias. However, it is important to note that the v-NLLS regression method is biased toward the data in the low concentration range. This is because the Langmuir equation has a sharp rise at low concentration values, which results in a large vertical error if the regression does not fit this region of the graph well. Conversely, the n-NLLS regression method does not have any significant bias toward any region of the adsorption isotherm. 

Whereas linear regressions are relatively easy to pursue with simple programs, such as excel or hand-held calculators, the nonlinear regressions are much more difficult to solve. The NLLS regressions are best pursued with any of various computer programs.

== External links ==
* [http://www.chem.qmw.ac.uk/surfaces/scc/scat3.htm Langmuir isotherm  from Queen Mary, University of London] 
* [http://www.alfisol.com/IFS/IFS-003/LMMpro-Langmuir.php LMMpro, Langmuir equation-fitting software]

== References ==
* ''The constitution and fundamental properties of solids and liquids. part i. solids.'' Irving Langmuir; [[J. Am. Chem. Soc.]] 38, 2221-95 '''1916''' {{Cite doi|10.1021/ja02268a002}}

[[Category:Surface chemistry]]

[[de:Sorptionsisotherme#Langmuir-Isotherme]]