|
|
| (One intermediate revision by one other user not shown) |
| Line 1: |
Line 1: |
| Vehicular [[traffic]] can be either free or congested. Traffic occurs in time and space, i.e., it is a spatiotemporal process. However, usually traffic can be measured only at some road locations (for example, via road detectors, [[video camera]]s, [[Floating car data|probe vehicle data]], or [[Floating car data|phone data]]). For efficient [[Road transport#Traffic control|traffic control]] and other [[intelligent transportation systems]], the reconstruction of [[traffic congestion]] is necessary at all other road locations at which traffic measurements are not available. Traffic congestion can be reconstructed in space and time (Fig. 1) based on [[Boris Kerner]]’s [[three phase traffic theory|three-phase traffic theory]] with the use of the ASDA and FOTO models introduced by Kerner.<ref name="KernerPatent1996">[http://www.freepatentsonline.com/5861820.pdf Boris S. Kerner, Kirschfink H, Rehborn H; Method for the automatic monitoring of traffic including the analysis of back-up dynamics, Deutsches Patent DE19647127C2, USA patent: US 5861820 (Filed: 1996)]</ref><ref name="KernerPatent1998">[http://www.freepatentsonline.com/6587779.pdf Boris S. Kerner, Rehborn H., Traffic surveillance method and vehicle flow control in a road network, Deutsche Patentoffenlegung DE19835979A1, USA patent: US 6587779B1 (Filed: 1998)]</ref><ref name="KernerPatent1999a">[http://www.patent-de.com/20020207/DE19944077C2.html Boris S. Kerner, M. Aleksić, U. Denneler; Verfahren und Vorrichtung zur Verkehrszustandsüberwachung, Deutsches Patent DE19944077C1 (Filed: 1999)]</ref><ref name="KernerPatent1999b">[http://www.freepatentsonline.com/6813555.pdf Boris S. Kerner; Method for monitoring the condition of traffic for a traffic network comprising effective narrow points, Deutsche Patentoffenlegung DE19944075A1; USA patent: US 6813555B1; Japan: JP 2002117481 (Filed: 1999)]</ref><ref name="KernerPatent2000">[http://www.freepatentsonline.com/6522970.pdf Boris S. Kerner Deutsches Patent DE10036789A1; Method for determining the traffic state in a traffic network with effective bottlenecks, USA patent: US 6522970B2 (Filed: 2000)]</ref> Kerner’s three-phase traffic theory and, respectively, the ASDA/FOTO models are based on some ''common'' spatiotemporal features of traffic congestion observed in measured traffic data.
| | Christmas is supposed to be one for the most wonderful times for the year, but we are very mindful the stress and worry of endeavoring to get all of the shopping tired overcrowded malls. All those people rushing around can be quite overwhelming. Have got carefully chosen a choice of gifts at competitive prices, which are usually delivered right to your side.<br><br>In accessory for water, additionally you need to foods for you to help you through the time period calamity. If you'd like to provide the best survival kit list, you should get the essential foods that can assist you you to live a particular catastrophic automobile accident. Also, you need to have adequate the amount of light. Emergency flashlight, lamp and even flashlights which might be solar powered are must for you to survive the night time. It is also in order to have a battery-operated radio in order to aid you in getting the ugg news within place.<br><br>Someone always be agree with me, but also think the ugg boots tend to be higher price compared with any other brand shoes, they doubt whether these sheepskin boots are worthy to decide to purchase. This article will tell you Ugg boots are really worthy utilizing investment while they have a little costly.<br><br>Buying cheap snowboard boots is kind of hard to call because persons will let you never get cheap boots, nevertheless say when you find yourself only intending on snowboarding once or twice a year then preserving the earth . o.k. to cheap snowboard boots. cheap boots should cost around $100-$120(sometimes cheaper online).<br><br>Henry thump-thump-thumps to your kitchen. Carolyn is filling the kettle with water -- so she's found it -- sporting that mom-smile, the one that makes him feel sort of a ten year-old who hasn't done his homework. But suddenly that smile falls off her face. Henry can almost hear it shatter on your floor, sort of a glass ashtray. Hah, victory! But what has he utilized to earn one?<br><br>I could remember once i bought my first $130 associated with Browning hunters. Those were the best boots That i've ever had. The goretex with them lasted me 5 many I continue to have them. So still bring to mind those boots to doing work in with a grin on my own face. I put lots of miles in those boots and harvested my first bull elk in them all. Boots in a way are a lot rifle, you come person to love them and they'll take care of you by taking care of parents. Boots can be your best friend or your worst opposing players.<br><br>If you have any kind of questions concerning where and just how to use [http://horizonafrica.com/img/ ugg boots outlet], you can call us at our own web-site. |
| | |
| [[File:asda en 1 patterns.png|thumb|Fig. 1. Empirical examples of traffic congestion reconstructed by the ASDA/FOTO models using raw data measured by road detectors on different highways in the United Kingdom, Germany, and the USA. Representation of traffic congestion in space-time plane through regions associated with two qualitatively different traffic phases in congested traffic: 1. Wide moving jam (red regions). 2. Synchronized flow (yellow regions). White regions – free flow.]]
| |
| | |
| == Common spatiotemporal empirical features of traffic congestion ==
| |
| | |
| === Definition ===
| |
| | |
| Common spatiotemporal empirical features of traffic congestion are those spatiotemporal features of traffic congestion, which are qualitatively the same for different [[highways]] in different countries measured during years of traffic observations. In particular, common features of traffic congestion are independent on [[weather]], road conditions and road infrastructure, vehicular technology, driver characteristics, day time, etc.
| |
| | |
| Kerner’s definitions [S] and [J], respectively, for the synchronized flow and wide moving jam phases in congested traffic<ref name="PhysRevLetters1998">[http://prl.aps.org/abstract/PRL/v81/i17/p3797_1 Boris S. Kerner, "Experimental Features of Self-Organization in Traffic Flow", Physical Review Letters, 81, 3797-3400 (1998)]</ref><ref name="PhysicsWorld1999">[http://physicsworldarchive.iop.org/index.cfm?action=summary&doc=12%2F8%2Fphwv12i8a30%40pwa-xml Boris S. Kerner, "The physics of traffic", Physics World Magazine 12, 25-30 (August 1999)]</ref><ref name="TRB1999">[http://trb.metapress.com/content/l216k764n4l22qr8/?p=de2645a37c484389b0ea5d476b3be359&pi=19 Boris S. Kerner, "Congested Traffic Flow: Observations and Theory", Transportation Research Record, Vol. 1678, pp. 160-167 (1999)]</ref> are examples of common spatiotemporal empirical features of traffic congestion.
| |
| | |
| === Propagation of wide moving jams through highway bottlenecks ===
| |
| | |
| In empirical observations, traffic congestion occurs usually at a highway [[bottleneck]] as a result of [[Three phase traffic theory|traffic breakdown]] in an initially free flow at the bottleneck. A highway bottleneck can result from on- and off-ramps, road curves and [[gradients]], [[road works]], etc. | |
| | |
| In congested traffic (this is a synonym term to traffic congestion), a phenomenon of the propagation of a moving traffic jam (moving jam for short) is often observed. A [[Three phase traffic theory|moving jam]] is a local region of low speed and great density that propagates upstream as a whole localized structure. The jam is limited spatially by two jam fronts. At the downstream jam front, vehicles accelerate to a higher speed downstream of the jam. At the upstream jam front, vehicles decelerate while approaching the jam.
| |
| | |
| A wide moving jam is a moving jam that exhibits the characteristic jam feature [J], which is a ''common'' spatiotemporal empirical feature of traffic congestion. The jam feature [J] defines the wide moving jam traffic phase in congested traffic as follows.
| |
| | |
| ==== Definition [J] for wide moving jam ====
| |
| | |
| A wide moving jam is a moving traffic jam, which exhibits the characteristic jam feature [J] to propagate through any bottlenecks while maintaining the mean velocity of the downstream jam front denoted by <math>v_{g}</math>.
| |
| | |
| Kerner’s jam feature [J] can be explained as follows. The motion of the downstream jam front results from acceleration of drivers from a standstill within the jam to traffic flow downstream of the jam. After a vehicle has begun to accelerate escaping from the jam, to satisfy safety driving, the following vehicle begins to accelerate with a time delay. We denote the mean value of this time delay in vehicle acceleration at the downstream jam front by <math>\tau_{del, jam}^{(a)}</math>. Because the average distance between vehicles within the jam, including average vehicle length, equals to <math>\frac{1}{\rho_{max}}</math> (where <math>\rho_{max}</math> is the average vehicle density within the jam), the mean velocity of the downstream jam front <math>v_{g}</math> is
| |
| | |
| <math>v_{g} = - \frac{1}{\rho_{max} \tau_{del, jam}^{(a)}}\qquad\qquad(1)</math>.
| |
| | |
| When traffic parameters (percentage of long vehicles, weather, driver characteristics, etc.) do not change over time, <math>\tau_{del, jam}^{(a)}</math> and <math>\rho_{max}</math> are constant in time. This explains why the mean velocity of the downstream jam front <math>v_{g}</math> (1) is the characteristic parameter that does not depend of the flow rates and densities upstream and downstream of the jam.
| |
| | |
| === Catch effect: pinning of downstream front of synchronized flow at bottleneck ===
| |
| | |
| In contrast with the jam feature [J], the mean velocity of the downstream front of synchronized flow is not self-maintained during the front propagation. This is the ''common'' feature of synchronized flow that is one of the two phases of traffic congestion.
| |
| | |
| A particular case of this common feature of synchronized flow is that the downstream synchronized flow front is usually caught at a highway bottleneck. This pinning of the downstream front of synchronized flow at the bottleneck is called the ''catch effect''. Note that at this downstream front of synchronized flow, vehicles accelerate from a lower speed within synchronized flow upstream of the front to a higher speed in free flow downstream of the front.
| |
| | |
| ==== Definition [S] for synchronized flow ====
| |
| | |
| Synchronized flow is defined as congested traffic that does not exhibit the jam feature [J]; in particular, the downstream front of synchronized flow is often fixed at the bottleneck.
| |
| | |
| Thus Kerner’s definitions [J] and [S] for the wide moving jam and synchronized flow phases of his three-phase traffic theory<ref name="PhysRevLetters1998"/><ref name="PhysicsWorld1999"/><ref name="TRB1999"/> are indeed associated with common empirical features of traffic congestion.
| |
| | |
| === Empirical example of wide moving jam and synchronized flow ===
| |
| | |
| Vehicle speeds measured with road detectors (1 min averaged data) illustrate Kerner’s definitions [J] and [S] (Fig. 2 (a, b)). There are two spatiotemporal patterns of congested traffic with low vehicle speeds in Fig. 2 (a). One pattern of congested traffic propagates upstream with almost constant mean velocity of the downstream pattern front through the freeway bottleneck. According to the definition [J] this pattern of congested traffic belongs to the "wide moving jam" traffic phase. In contrast, the downstream front of the other pattern of the congested traffic is fixed at the bottleneck. According to the definition [S] this pattern of congested traffic belongs to the "synchronized flow" traffic phase (Fig. 2 (a) and (b)).
| |
| | |
| [[File:asda en 2 phases.png|thumb|Fig.2. Empirical spatiotemporal common features of traffic congestion and the associated traffic phase definitions in Kerner’s theory: (a) Measured data of average vehicle speed in time and space. (b) Representation of speed data in (a) on the time-space plane. (c-f) Time-dependences of speed (c, e) and flow rate (d, f) at two different locations within traffic congestion shown in (a, b); the data in (c, d) and (e, f) are measured respectively at location 17.1 km (c, d) (just downstream of on-ramp lane of an on-ramp bottleneck labelled "On-ramp bottleneck" in (a, b)) and at location 16.2 km (e, f) (upstream of the bottleneck). At location 17.1 the flow rate (d) in free and synchronized flows is greater in comparison with that at location 16.2 (f) due to on-ramp inflow at the bottleneck.]]
| |
| | |
| == ASDA and FOTO models ==
| |
| | |
| The FOTO ('''F'''orecasting '''o'''f '''t'''raffic '''o'''bjects) model reconstructs and tracks regions of synchronized flow in space and time. The ASDA ('''A'''utomatische '''S'''tau'''d'''ynamik'''a'''nalyse: Automatic Tracking of Moving Jams) model reconstructs and tracks wide moving jams. The ASDA/FOTO models are devoted to ''on-line'' applications without calibration of model parameters under different environment conditions, road infrastructure, percentage of long vehicles, etc.
| |
| | |
| === General features ===
| |
| | |
| Firstly, the ASDA/FOTO models identify the synchronized flow and wide moving jam phases in measured data of congested traffic.
| |
| One of the empirical features the synchronized flow and wide moving jam phases used in the ASDA/FOTO models for traffic phase identification is as follows: Within a wide moving jam, both the speed and flow rate are very small (Fig. 2 (c-f)). In contrast, whereas the speed with the synchronized flow phase is considerably lower than in free flow (Fig. 2 (c, e)), the flow rate in synchronized flow can be as great as in free flow (Fig. 2 (d, f)).
| |
| | |
| [[File:asda en 3 asda model.png|thumb|Fig. 3. Explanation of ASDA/FOTO models. Superscripts "jam 1", "jam 2" are related to two different wide moving jams. Superscripts "syn" are associated with synchronized flows. Subscripts "up" and "down" are related respectively to the upstream and downstream fronts of synchronized flow and wide moving jams.]]
| |
| | |
| Secondly, based on the abovementioned common features of wide moving jams and synchronized flow, the FOTO model tracks the downstream and upstream fronts of synchronized flow denoted by <math>x_{down}^{(syn)}(t)</math>, <math>x_{up}^{(syn)}(t)</math>, where <math>t</math> is time (Fig. 3). The ADSA model tracks the downstream and upstream fronts of wide moving jams denoted by <math>x_{down}^{(jam)}(t)</math>, <math>x_{up}^{(jam)}(t)</math> (Fig. 3). This tracking is carried out between road locations at which the traffic phases have initially been identified in measured data, i.e., when synchronized flow and wide moving jams cannot be measured.
| |
| | |
| In other words, the tracking of synchronized flow by the FOTO model and wide moving jams by the ASDA model is performed at road locations at which ''no'' traffic measurements are available, i.e., the ASDA/FOTO models make the forecasting of the front locations of the traffic phases in time. The ASDA/FOTO models enable us to predict the [[Merge (traffic)|merging]] and/or the dissolution of one or more initially different synchronized flow regions and of one or more initially different wide moving jams that occur between measurement locations.
| |
| | |
| === ASDA/FOTO models for data measured by road detectors ===
| |
| | |
| ==== Cumulative flow approach for FOTO ====
| |
| | |
| While the downstream front of synchronized flow at which vehicles accelerate to free flow is usually fixed at the bottleneck (see Fig. 2 (a, b)), the upstream front of synchronized flow at which vehicles moving initially in free flow must decelerate approaching synchronized flow can propagate upstream. In empirical (i.e., measured) traffic data, the velocity of the upstream front of synchronized flow depends usually considerably both on traffic variables within synchronized flow downstream of the front and within free flow just upstream of this front. A good correspondence with empirical data is achieved, if a time-dependence of the location of the synchronized flow front is calculated by the FOTO model with the use of a so-called cumulative flow approach:
| |
|
| |
| <math>x_{up}^{(syn)}(t) = \mu \frac{1}{n} \int_{t_{0}}^{t} (q_{S}(t) - q_{F}(t)) dt,\ \ t \geq t_{0}\qquad\qquad(2)</math>
| |
| | |
| where <math>q_{F}</math> and <math>q_{S}</math> [vehicles/h] are respectively the flow rates upstream and downstream of the synchronized flow front, <math>\mu</math> is a model parameter [m/vehicles], and <math>n</math> is the number of road lanes.
| |
| | |
| ==== Two approaches for jam tracking with ASDA ====
| |
| | |
| There are two main approaches for the tracking of wide moving jams with the ASDA model:
| |
| # The use of the Stokes-shock-wave formula.
| |
| # The use of a characteristic velocity of wide moving jams.
| |
| | |
| ===== The use of the Stokes-shock-wave formula in ASDA =====
| |
| | |
| The current velocity <math>v^{(jam)}</math> of a front of a wide moving jam is calculated though the use of the shock-wave formula derived by Stokes in 1848:<ref name="Stokes1848">[http://ebooks.cambridge.org/chapter.jsf?bid=CBO9780511702259&cid=CBO9780511702259A011 George G. Stokes, "On a difficulty in the theory of sound", Philosopical Magazine, 33, pp 349-356 (1848)]</ref>
| |
| | |
| <math>v^{(jam)}(t) = \frac{q_{2}(t) - q_{1}(t)}{\rho_{2}(t) - \rho_{1}(t)}\qquad\qquad(3)</math>,
| |
| | |
| where <math>q_{1}</math> and <math>\rho_{1}</math> the flow rate and density upstream of the jam front that velocity should be found; <math>q_{2}</math> and <math>\rho_{2}</math> are the flow rate and density downstream of this jam front. In (3) ''no any'' relationship, in particular, ''no'' [[fundamental diagram]] is used between the flow rates <math>q_{1}</math>, <math>q_{2}</math> and vehicle densities <math>\rho_{1}</math>, <math>\rho_{2}</math> found from measured data independent of each other.
| |
| | |
| ===== The use of a characteristic velocity of wide moving jams =====
| |
| | |
| If measured data are not available for the tracking of the downstream jam front with the Stokes-shock-wave formula (3), the formula
| |
| | |
| <math>v_{down}^{(jam)} = v_{g}\qquad\qquad(4)</math> | |
| | |
| is used in which <math>v_{g}</math> is the characteristic velocity of the downstream jam front associated with Kerner’s jam feature [J] discussed above. This means that after the downstream front of a wide moving jam has been identified at a time instant <math>t = t_{1}</math>, the location of the downstream front of the jam can be estimated with formula
| |
| | |
| <math>x(t) - x(t_{1}) = v_{g}(t-t_{1}),\ \ t > t_{1}\qquad\qquad(5)</math>
| |
| | |
| The characteristic jam velocity is illustrated in Fig. 4. Two wide moving jams propagate upstream while maintaining the mean velocity of their downstream fronts. There are two jams following each other in this empirical example. | |
| | |
| However, in contrast with the mean velocity of the downstream jam front, the mean velocity of the upstream jam front depends on the flow rate and density in traffic flow upstream of the jam. Therefore, in a general case the use of formula (5) can lead to a great error by the estimation of the mean velocity of the upstream jam front.
| |
| | |
| [[File:asda en 4 measurements.png|thumb|Fig. 4: Measured traffic data that illustrates the characteristic jam feature [J]: (a, b) Average speed denoted by v km/h (a) and flow rate denoted by q [vehicles/h] (b) in space and time. (c, d) Time-dependences of flow rate and speed within traffic congestion in (a, b) at two different road locations shown for each of the three road lanes.]]
| |
| | |
| In many data measured on German highways has been found <math>v_{g} \approx -15 \mbox{km/h}</math>. However, although the mean velocity <math>v_{g}</math> of the downstream jam front is independent of the flow rates and densities upstream and downstream of the jam, <math>v_{g}</math> can depend considerably on traffic parameters like the percentage of long vehicles in traffic, weather, driver characteristics, etc. As a result, the mean velocity <math>v_{g}</math> found in different data measured over years of observations varies approximately within the range <math>-12 > v_{g} > -20 \mbox{km/h}</math>.
| |
| | |
| ==== On-line applications of ASDA/FOTO models in traffic control centres ====
| |
| | |
| Reconstruction and tracking of spatiotemporal congested patterns with the ASDA/FOTO models is done today online permanently in the traffic control centre of the federal state Hessen (Germany) for 1200 km of freeway network. Since April 2004 measured data of nearly 2500 detectors are automatically analyzed by ASDA/FOTO. The resulting spatiotemporal traffic patterns are illustrated in a space-time diagram showing congested pattern features like Fig. 5. The online system has also been installed in 2007 for North-Rhine Westphalia freeways. The raw traffic data are transferred to [[Westdeutscher Rundfunk|WDR]], the major public radio broadcasting station from North-Rhine Westphalia in Cologne, who offers traffic messages to the end customer (e. g., radio listener or driver) via broadcast channel [[Radio Data System|RDS]]. The application covers a part of the whole freeway network with 1900 km of freeway and more than 1000 double loop detectors. In addition, since 2009 ASDA/FOTO models are online in the northern part of Bavaria.
| |
| | |
| [[File:asda en 5 traveltime.png|thumb|Fig. 5: Congested traffic pattern reconstructed by FOTO and ASDA models: space-time diagram with vehicle trajectories 1-4 and related travel delay times. Road detector data as input for ASDA/FOTO models is measured on freeway A5-North in Hessen, Germany, 14th June, 2006]]
| |
| | |
| ==== Average traffic flow characteristics and travel time ====
| |
| | |
| In addition to spatiotemporal reconstruction of traffic congestion (Figs. 1 and 5), the ASDA/FOTO models can provide average traffic flow characteristics within synchronized flow and wide moving jams. In turn, this permits the estimation of either travel time on a road section or travel time along any vehicle trajectory (see examples of trajectories 1-4 in Fig. 5).
| |
| | |
| === ASDA/FOTO models for data measured by probe vehicles ===
| |
| | |
| Firstly, the ASDA and FOTO models identify transition points for phase transitions along the trajectory of a probe vehicle.<ref name="Tec1_2011">[http://www.tecmagazine.com/index.cfm?fuseaction=magazine.Article&ArticleID=4541 B.S. Kerner, H. Rehborn, J. Palmer, S.L. Klenov, Using probe vehicle to generate jam warning messages, Traffic Engineering and Control Vol 52, No 3 141-148 (2011)]</ref><ref name="Tec2_2011">[http://www.tecmagazine.com/index.cfm?fuseaction=magazine.Article&ArticleID=4557 J. Palmer, H. Rehborn, B.S. Kerner, ASDA and FOTO Models based on Probe Vehicle Data, Traffic Engineering and Control Vol 52 No 4, 183-191 (2011)]</ref> Each of the transition points is associated to the front separating spatially two of the three different traffic phases each other (free flow (F), synchronized flow (S), wide moving jam (J)). After the transition points have been found, the ASDA/FOTO models reconstruct regions of synchronized flow and wide moving jams in space and time with the use of empirical features of these traffic phases discussed above (see Figs. 2 and 4).
| |
| | |
| == See also ==
| |
| * [[Active Traffic Management]]
| |
| * [[Fundamental diagram]]
| |
| * [[Intelligent transportation system]]
| |
| * [[Kerner’s breakdown minimization principle]]
| |
| * [[Microscopic traffic flow model]]
| |
| * [[Three phase traffic theory]]
| |
| * [[Traffic bottleneck]]
| |
| * [[Traffic flow]]
| |
| * [[Traffic wave]]
| |
| * [[Traffic congestion]]
| |
| * [[Transportation forecasting]]
| |
| | |
| == Notes ==
| |
| <references />
| |
| | |
| ==Bibliography==
| |
| * Kerner B. S., Konhäuser P. (1994). Structure and parameters of clusters in traffic flow, Physical Review E, Vol. 50, 54
| |
| * Kerner B. S., Rehborn H. (1996). Experimental features and characteristics of traffic jams. Physical Review E, Vol. 53, 1297
| |
| * Kerner B. S., Rehborn H. (1996). Experimental properties of complexity in traffic flow. Physical Review E, Vol. 53, R4257
| |
| * Kerner B. S., Kirschfink H., Rehborn H. (1997) Automatische Stauverfolgung auf Autobahnen, Straßenverkehrstechnik, No. 9, pp 430–438
| |
| * Kerner B. S., Rehborn H. (1998) Messungen des Verkehrsflusses: Charakteristische Eigenschaften von Staus auf Autobahnen, Internationales Verkehrswesen, 5/1998, pp 196–203
| |
| * Kerner B. S., Rehborn H., Aleksić M., Haug A., Lange R. (2000) Verfolgung und Vorhersage von Verkehrsstörungen auf Autobahnen mit ”ASDA” und ”FOTO” im online-Betrieb in der Verkehrsrechnerzentrale Rüsselsheim, Straßenverkehrstechnik, No. 10, pp 521–527
| |
| * Kerner B. S., Rehborn H., Aleksić M., Haug A. (2001) Methods for Tracing and Forecasting of Congested Traffic Patterns on Highways, Traffic Engineering and Control, 09/2001, pp 282–287
| |
| * Kerner B. S., Rehborn H., Aleksić M., Haug A., Lange R. (2001) Online Automatic tracing and forecasting of traffic patterns with models “ASDA” and “FOTO”, Traffic Engineering and Control, 11/2001, pp 345–350
| |
| * Kerner B. S., Rehborn H., Aleksić M., Haug A. (2004): Recognition and Tracing of Spatial-Temporal Congested Traffic Patterns on Freeways, Transportation Research C, 12, pp 369–400
| |
| * Palmer J., Rehborn H. (2007) ASDA/FOTO based on Kerner’s Three-Phase Traffic Theory in North-Rhine Westfalia (in German), Straßenverkehrstechnik, No. 8, pp 463–470
| |
| * Palmer J., Rehborn H., Mbekeani L. (2008) Traffic Congestion Interpretation Based on Kerner’s Three-Phase Traffic Theory in USA, In: Proceedings 15th World Congress on ITS, New York
| |
| * Palmer J., Rehborn H. (2009) Reconstruction of congested traffic patterns using traffic state detection in autonomous vehicles based on Kerner’s three-phase traffic theory, In: Proceedings of. 16th World Congress on ITS, Stockholm
| |
| * Rehborn H, Klenov S.L. (2009) Traffic Prediction of Congested Patterns, In: R. Meyers (Ed.): Encyclopedia of Complexity and Systems Science, Springer New York, 2009, pp 9500–9536
| |
| * Boris S. Kerner, Rehborn H, Klenov S L, Palmer J, Prinn M (2009) Verfahren zur Verkehrszustandsbestimmung in einem Fahrzeug, (Method for traffic state detection in a vehicle), German Patent publication DE 10 2008 003 039 A1.
| |
| | |
| ==Further reading==
| |
| * [http://www.springer.com/engineering/mechanical+eng/book/978-3-642-02604-1 B.S. Kerner, ''Introduction to Modern Traffic Flow Theory and Control: The Long Road to Three-Phase Traffic Theory'', Springer, Berlin, New York 2009]
| |
| * [http://www.springer.com/physics/complexity/book/978-3-540-20716-0 B.S. Kerner, ''The Physics of Traffic'', Springer, Berlin, New York 2004]
| |
| | |
| [[Category:Road transport]]
| |
| [[Category:Transport engineering]]
| |
| [[Category:Mathematical physics]]
| |
| [[Category:Road traffic management]]
| |