View source for Inequalities in information theory

'''Castability''' is the ease of forming a quality [[casting]].<ref name=ravi1/> A very castable part design is easily developed, incurs minimal tooling costs, requires minimal energy, and has few rejections.<ref name=ravi2>Ravi, p. 2</ref>  Castability can refer to a part design or a [[material properties|material property]].<ref name=ravi1>Ravi, p. 1</ref>

==Part design==
Part design and geometry directly affect the castability, with volume, surface area and the number of features being the most important attributes. 

If the design has [[undercut (manufacturing)|undercut]]s or interior cavities it decreases castability due to tooling complexity. Long thin sections in a design are hard to fill.<ref name=ravi1/> Sudden changes in wall thickness reduce castability because it induces [[turbulence]] during filling; [[fillet (mechanics)|fillet]]s should be added to avoid this. Annulars in the path of flow should be avoided because they can cause [[cold shut]]s or [[misrun]]s. A design that causes isolated [[hot spot (casting)|hot spots]] decreases castability.<ref name=ravi3/> An ideal design would have progressive [[directional solidification]] from the thinnest section to the thickest.<ref name=ravi4>Ravi, p. 4.</ref>

Location of the mold's [[parting line]] also affects castability, because a non-planar parting line also increases tooling complexity.

If a design requires a high degree of accuracy, fine [[surface finish]] or defect free surface it reduces the castability of the part.<ref name=ravi2/> However, the casting process can be very economical for part designs that require intricate contoured surfaces, thickness variations, and internal features.<ref name=ravi3>Ravi, p. 3.</ref>

===Quantitative analysis===
The castability of a design can be partially quantitatively determined by the following three equations. Better castability is denoted by a larger number.<ref name=ravi3/>

:<math>\frac{V_c}{V_b}</math>

Where V<sub>c</sub> is the volume of the casting and V<sub>b</sub> is the volume of the smallest box that the casting could fit in.

:<math>\frac{6(V_c)^{2/3}}{A_c}</math>

Where V<sub>c</sub> is the volume of the casting and A<sub>c</sub> is the surface area of the casting

:<math>\frac{1}{(1+n_f)^{0.5}}</math>

Where n<sub>f</sub> is the number of features (holes, pockets, slots, bosses, ribs, etc.)

==Material properties==
Material properties that influence their castability include their pouring temperature, [[fluidity]], solidification [[Shrinkage_(casting)#Shrinkage|shrinkage]], and [[slag]]/[[dross]] formation tendencies.<ref name=ravi1/><ref>''Tool and Manufacturing Engineers Handbook'' (TMEH), 4th Edition, Volume 6, ''Design for Manufacturability'', Society of Manufacturing Engineers, 1992.</ref>

==See also==
*[[Casting defects]]

==References==
===Notes===
{{reflist}}

===Bibliography===
*{{Citation | first = B. | last = Ravi | title = Design for castability | publisher = IIT Bombay | url = http://www.energymanagertraining.com/foundries/pdf/CDA7.pdf |archiveurl = http://web.archive.org/web/20061210224324/http://www.energymanagertraining.com/foundries/pdf/CDA7.pdf |archivedate = 2006-12-10}}.

[[Category:Casting (manufacturing)]]