|
|
| (One intermediate revision by one other user not shown) |
| Line 1: |
Line 1: |
| [[Image:FSL.jpg|right|thumb|A spectrum analyzer from 2005]]
| | This is a strategy and conjointly battle activation where then you must manage your man or women tribe and also protect it. You have that can build constructions which will definately provide protection for your soldiers along with the very [http://search.usa.gov/search?query=instruction instruction]. First really focus on your protection in addition to after its recently been very taken treatment. You ought to to move forward which has the criminal offense plan of action. As well as your Military facilities, you likewise need to keep in mind the way your indigneous group is certainly going. For instance, collecting articles as well as raising your own tribe may be the key to good studies.<br><br> |
| [[Image:Spectrum Analyser PCB.jpg|thumb|right|The main PCB from a {{nowrap|20 GHz}} spectrum analyser. Showing the [[Distributed element filter|stripline PCB filters]], and modular block construction.]] | |
| A '''spectrum analyzer''' measures the magnitude of an input signal versus frequency within the full frequency range of the instrument. The primary use is to measure the power of the spectrum of known and unknown signals. The input signal a spectrum analyzer measures is [[electricity|electrical]], however, [[Frequency spectrum|spectral]] compositions of other signals, such as [[acoustics|acoustic]] pressure waves and [[optics|optical]] light waves, can be considered through the use of an appropriate [[transducer]]. Optical spectrum analyzers also exist, which use direct optical techniques such as a [[monochromator]] to make measurements.
| |
|
| |
|
| By analyzing the [[Frequency spectrum|spectra]] of [[electricity|electrical]] signals, dominant [[frequency]], [[Electric Power|power]], [[distortion]], [[harmonics]], [[Bandwidth (signal processing)|bandwidth]], and other [[Frequency spectrum|spectral]] components of a signal can be observed that are not easily detectable in [[time domain]] [[waveform]]s. These parameters are useful in the characterization of electronic devices, such as [[Wireless|wireless transmitters]].
| | when you are locating the latest handle system tough to use, optimize the configuration within your activity. The default manage platform might not be by everyone. Some individuals prefer a better view screen, a set within more sensitive management and even perhaps an inverted pecking order. In several tutorial gaming, you may regulation these from the setting's area.<br><br>Among the many games which have ended up created till now, clash of clans is preferred by frequently develops after. The game which requires players develop a villages and characters to do everything forward can quite challenging at times. Batters have to carry out doors different tasks including raids and missions. In the event you loved this informative article and you wish to receive more details about [http://prometeu.net clash of clans cheats android] kindly visit our own page. These can be very tough numerous players often get stuck in one place. When this happens, it would be quite frustrating. But this can be been changed now because there is often a way out of it.<br><br>Salary attention to how so much money your teenager is always spending on video console games. These products aren't cheap and there is generally often the option most typically associated with buying more add-ons within the game itself. Set monthly and once a year limits on the expense of money that should be spent on video games. Also, carry conversations with your little children about budgeting.<br><br>It's important to agenda your main apple is consistently attach from association war dilemmas because association wars are fought inside a become different breadth absolutely -- this specific war zone. In the war region, your adapt and advance war bases instead of given villages; therefore, your communities resources, trophies, and absorber are never in jeopardy.<br><br>Group wars can alone come to be started by market leaders or co-leaders. Once started, the bold will surely chase to have any adversary association of agnate durability. Backbone isn't bent because of the cardinal of trophies, but by anniversary members promoting ability (troops, army infected capacity, spells clash together with clans Cheats and heroes) in addition to arresting backbone (security buildings, walls, accessories and heroes).<br><br>Future house fires . try [https://Www.Vocabulary.com/dictionary/interpreting interpreting] the actual abstracts differently. Hope of it in design of bulk with other jewels to skip 1 2nd. Skipping added the time expenses added money, but rather you get a more prominent deal. Think to do with it as a few accretion discounts. |
| | |
| The display of a spectrum analyzer has frequency on the horizontal axis and the amplitude displayed on the vertical axis. To the casual observer, a spectrum analyzer looks like an [[oscilloscope]] and, in fact, some lab instruments can function either as an oscilloscope or a spectrum analyzer. | |
| | |
| == History ==
| |
| {{expand section|date=December 2012}}
| |
| [[Image:sonagraphe.jpg|thumb|right|A spectrum analyzer circa 1970]]
| |
| The first spectrum analyzers, in the 1960s, were swept-tuned instruments.<ref name="Hiebert">''[http://electronicdesign.com/displays/take-peek-inside-todays-spectrum-analyzers Take A Peek Inside Today's Spectrum Analyzers]''; Bob Hiebert, 2005, accessed 10 April 2013.</ref>
| |
| | |
| Following the discovery of the [[Fast Fourier Transform]] in 1965, the first FFT-based analyzers were introduced in 1967.<ref name="Deery">''[http://www.sandv.com/downloads/0701deer.pdf The ‘Real’ History of Real-Time Spectrum Analyzers]''; Joe Deery, 2007, accessed 10 April 2013.</ref>
| |
| | |
| Today, there are three basic types of analyzer: the swept-tuned spectrum analyzer, the vector signal analyzer, and the real-time spectrum analyzer.<ref name="Hiebert" />
| |
| | |
| == Types ==
| |
| [[Image:SpectrumAnalyzerDisplay.png|right|thumb|A modern spectrum analyzer display]]
| |
| Spectrum analyzer types are dictated by the methods used to obtain the spectrum of a signal. There are swept-tuned and [[Fast Fourier Transform|FFT]] based spectrum analyzers:
| |
| *A ''swept-tuned'' spectrum analyzer uses a [[superheterodyne receiver]] to [[Superheterodyne receiver#High-side and low-side injection|down-convert]] a portion of the input signal spectrum (using a [[voltage-controlled oscillator]] and a [[Frequency mixer|mixer]]) to the center frequency of a [[band-pass filter]]. With a superheterodyne architecture, the [[voltage-controlled oscillator]] is swept through a range of frequencies, enabling the consideration of the full frequency range of the instrument.
| |
| *A ''[[Fast Fourier Transform|FFT]] '' spectrum analyzer computes the [[discrete Fourier transform]] (DFT), a mathematical process that transforms a waveform into the components of its [[frequency spectrum]], of the input signal.
| |
| | |
| Some spectrum analyzers, such as real-time spectrum analyzers, use a hybrid technique where the incoming signal is first [[Superheterodyne receiver#High-side and low-side injection|down-converted]] to a lower frequency using superheterodyne techniques and then analyzed using [[Fast Fourier transform|fast fourier transformation]] (FFT) techniques.
| |
| | |
| == Form factor ==
| |
| Spectrum analyzers tend to fall into three form factors: benchtop, portable and handheld.
| |
| | |
| ===Benchtop===
| |
| This form factor is useful for applications where the spectrum analyzer can be plugged into AC power, which generally means in a lab environment or production/manufacturing area. Bench top spectrum analyzers have historically offered better performance and specifications than the portable or handheld form factor. Bench top spectrum analyzers normally have multiple fans (with associated vents) to dissipate heat produced by the [[Central processing unit|processor]]. Due to their architecture, bench top spectrum analyzers typically weigh more than {{convert|30|lbs|kg}}. Some bench top spectrum analyzers offer optional [[battery pack]]s, allowing them to be used away from [[AC power]]. This type of analyzer is often referred to as a "portable" spectrum analyzer..
| |
| | |
| === Portable ===
| |
| This form factor is useful for any applications where the spectrum analyzer needs to be taken outside to make measurements or simply carried while in use. Attributes that contribute to a useful portable spectrum analyzer include:
| |
| *Optional battery-powered operation to allow the user to move freely outside.
| |
| *Clearly viewable display to allow the screen to be read in bright sunlight, darkness or dusty conditions..
| |
| *Light weight (usually less than {{convert|15|lbs|kg}}).
| |
| | |
| === Handheld ===
| |
| This form factor is useful for any application where the spectrum analyzer needs to be very light and small. Handheld analyzers offer a limited capability relative to larger systems. Attributes that contribute to a useful handheld spectrum analyzer include:
| |
| *Very low power consumption.
| |
| *Battery-powered operation while in the field to allow the user to move freely outside.
| |
| *Very small size
| |
| *Light weight (usually less than {{convert|2|lbs|kg}}).
| |
| | |
| == Theory of operation ==
| |
| [[Image:BPFAnimationV2.gif|right|This animation shows how the resolution bandwidth of a swept-tuned spectrum analyzer is affected by the IF bandpass filter. Notice that wider bandwidth filters are unable to resolve the two closely space frequencies and the LO feedthrough causes the appearance of a baseband signal.]]
| |
| | |
| === Swept-tuned ===
| |
| As discussed above in '''types''', a swept-tuned spectrum analyzer [[Superheterodyne receiver#High-side and low-side injection|down-converts]] a portion of the input signal spectrum to the center frequency of a [[band-pass filter]] by sweeping the [[voltage-controlled oscillator]] through a range of frequencies, enabling the consideration of the full frequency range of the instrument.
| |
| | |
| The bandwidth of the [[band-pass filter]] dictates the resolution bandwidth, which is related to the minimum bandwidth detectable by the instrument. As demonstrated by the animation to the right, the smaller the bandwidth, the more spectral resolution. However, there is a trade-off between how quickly the display can update the full frequency span under consideration and the frequency resolution, which is relevant for distinguishing frequency components that are close together. For a swept-tuned architecture, this relation for sweep time is useful: | |
| | |
| <math>\ ST=\frac{k(Span)}{RBW^2}</math>
| |
| | |
| Where ST is sweep time in seconds, k is proportionality constant, Span is the frequency range under consideration in Hertz, and RBW is the resolution bandwidth in Hertz.<ref>''[http://cp.literature.agilent.com/litweb/pdf/5952-0292.pdf Agilent Spectrum Analysis Basics]'', p. 23, August 2, 2006, accessed July 7, 2011.</ref>
| |
| Sweeping too fast, however, causes a drop in displayed amplitude and a shift in the displayed frequency.<ref>''[http://cp.literature.agilent.com/litweb/pdf/5952-0292.pdf Agilent Spectrum Analysis Basics]'', p. 22, Figure 2–14, August 2, 2006, accessed July 7, 2011.</ref>
| |
| | |
| Also, the animation contains both up- and down-converted spectra, which is due to a [[frequency mixer]] producing both sum and difference frequencies. The [[local oscillator]] feedthrough is due to the imperfect isolation from the [[intermediate frequency|IF]] signal path in the [[Frequency mixer|mixer]].
| |
| | |
| For very weak signals, a [[pre-amplifier]] is used, although [[total harmonic distortion|harmonic]] and [[intermodulation]] distortion may lead to the creation of new frequency components that were not present in the original signal.
| |
| | |
| === FFT-based ===
| |
| With a FFT based spectrum analyzer, the frequency resolution is <math>\Delta\nu=1/T</math>, the inverse of the time ''T'' over which the waveform is measured and Fourier transformed.
| |
| | |
| With Fourier transform analysis in a digital spectrum analyzer, it is necessary to sample the input signal with a sampling frequency <math>\nu_s</math> that is at least twice the bandwidth of the signal, due to the [[Nyquist rate|Nyquist limit]].<ref>[http://www.home.agilent.com/agilent/editorial.jspx?cc=US&lc=eng&ckey=1775376&nid=-536900125.0.00&id=1775376&pselect=SR.GENERAL How do I know what is the best sampling rate to use for my measurement?]</ref> A Fourier transform will then produce a spectrum containing all frequencies from zero to <math>\nu_s/2</math>. This can place considerable demands on the required [[analog-to-digital converter]] and processing power for the Fourier transform, making FFT based spectrum analyzers limited in frequency range.
| |
| [[Image:Aaronia Spectrum Analyzer Software.jpg|thumb|Frequency spectrum of the heating up period of a switching power supply (spread spectrum) incl. [[Waterfall plot|waterfall diagram]] over a few minutes.]]
| |
| | |
| === Hybrid superheterodyne-FFT ===
| |
| Since FFT based analyzers are only capable of considering narrow bands, one technique is to combine swept and FFT analysis for consideration of wide and narrow spans. This technique allows for faster sweep time.
| |
| | |
| This method is made possible by first down converting the signal, then digitizing the [[intermediate frequency]] and using superheterodyne or FFT techniques to acquire the spectrum.
| |
| | |
| One benefit of digitizing the intermediate frequency is the ability to use [[digital filter]]s, which have a range of [[Digital filter#Comparison of analog and digital filters|advantages]] over analog filters such as near perfect shape factors and improved filter settling time. Also, for consideration of narrow spans, the FFT can be used to increase sweep time without distorting the displayed spectrum.
| |
| | |
| === Realtime FFT ===
| |
| [[Image:Spectrum Analyser Time Domain Sampling and Blind Time.png|thumb|right|400px|Illustration showing Spectrum Analyzer Blind Time]]
| |
| [[Image:Comparison of Max Hold Spectrum Analyzer trace and Persistence Trace.png|thumb|right|400px|Comparison between Swept Max Hold and Realtime Persistence displays]]
| |
| [[Image:Bluetooth signal behind wireless lan signal.png|thumb|right|400px|Bluetooth signal hidden behind wireless LAN signal]]
| |
| | |
| Most modern spectrum analyzers are now almost exclusively Hybrid Superheterodyne-FFT based giving a significant improvement in sweep time. However, even in such cases there is still processing time required to sample the spectrum and calculate the FFT. For this reason, both swept-tuned and FFT based analyser produce "blind time" meaning that while calculation of the spectrum is being performed, the instrument has gaps and misses information of the RF spectrum being applied to the RF front end.
| |
| | |
| A realtime spectrum analyser does not have any such blind time—up to some maximum span, often called the "realtime bandwidth". The analyser is able to sample the incoming RF spectrum in the time domain and convert the information to the frequency domain using the FFT process. FFT's are processed in parallel, gapless and overlapped so there are no gaps in the calculated RF spectrum and no information is missed.
| |
| | |
| ==== Online realtime and offline realtime ====
| |
| In a sense, any spectrum analyzer that has [[vector signal analyzer]] capability is a realtime analyzer. It samples data fast enough to satisfy Nyquist Sampling theorem and stores the data in memory for later processing. This kind of analyser is only realtime for the amount of data / capture time it can store in memory and still produces gaps in the spectrum and results during processing time.
| |
| | |
| ==== FFT overlapping ====
| |
| Minimizing distortion of information is important in all spectrum analyzers. The FFT process applies windowing techniques to improve the output spectrum due to producing less side lobes. The effect of windowing may also reduce the level of a signal where it is captured on the boundary between one FFT and the next. For this reason FFT's in a Realtime spectrum analyzer are overlapped. Overlapping rate is approximately 80%. An analyzer that utilises a 1024 point FFT process will re-use approximately 819 samples from the previous FFT process.<ref>''[http://www.rohde-schwarz.com/appnote/1EF77.pdf Dr. Florian Ramian - Implementation of Real-Time Spectrum Analysis]'', p. 6, January, 2011, accessed August 9, 2011.</ref>
| |
| | |
| ==== Minimum signal detection time ====
| |
| This is related to the sampling rate of the analyser and the [[Fast Fourier transform|FFT]] rate. It is also important for the realtime spectrum analyzer to give good level accuracy.
| |
| | |
| Example: for an analyser with {{nowrap|40 MHz}} of realtime [[Bandwidth (signal processing)|bandwidth]] (the maximum RF span that can be processed in realtime) approximately {{nowrap|50 Msample/second}} (complex) are needed. If the spectrum analyzer produces {{nowrap|250 000 FFT/s}} an FFT calculation is produced every {{nowrap|4 µs.}} For a {{nowrap|1024 point}} FFT a full spectrum is produced {{nowrap|1024 x (1/50 x 10<sup>6</sup>),}} approximately every {{nowrap|20 µs.}} This also gives us our overlap rate of 80% {{nowrap|(20 µs − 4 µs) / 20 µs = 80%.}}
| |
| | |
| ===== Persistence =====
| |
| Realtime spectrum analyzers are able to produce much more information for users to examine the frequency spectrum in more detail. A normal swept spectrum analyzer would produce max peak, min peak displays for example but a realtime spectrum analyzer is able to plot all calculated FFT's over a given period of time with the added colour-coding which represents how often a signal appears. For example, this image shows the difference between how a spectrum is displayed in a normal swept spectrum view and using a "Persistence" view on a realtime spectrum analyzer.
| |
| | |
| ===== Hidden signals =====
| |
| Realtime spectrum analyzers are able to see signals hidden behind other signals. This is possible because no information is missed and the display to the user is the output of FFT calculations. An example of this can be seen on the right.
| |
| | |
| == Typical functionality ==
| |
| | |
| === Center frequency and span ===
| |
| In a typical spectrum analyzer there are options to set the start, stop, and center frequency. The frequency halfway between the stop and start frequencies on a spectrum analyzer display is known as the '''center frequency'''. This is the frequency that is in the middle of the display’s frequency axis. '''Span''' specifies the range between the start and stop frequencies. These two parameters allow for adjustment of the display within the frequency range of the instrument to enhance visibility of the spectrum measured. | |
| | |
| === Resolution bandwidth ===
| |
| As discussed in the '''operation''' section, the '''resolution bandwidth''' filter or RBW filter is the [[bandpass filter]] in the [[intermediate frequency|IF]] path. It's the [[Bandwidth (signal processing)|bandwidth]] of the [[Radio frequency|RF]] chain before the detector (power measurement device).<ref name=plsa>[http://www.piclist.com/techref/postbot.asp?by=thread&id=%5BEE%5D+TV+Tuner+Based+Spectrum+Analyzer&w=body&tgt=post&at=20120524233824apiclist.com - [EE] TV Tuner Based Spectrum Analyzer], 2012-05-25</ref> It determines the RF [[noise floor]] and how close two signals can be and still be resolved by the analyzer into two separate peaks.<ref name=plsa/> Adjusting the bandwidth of this filter allows for the discrimination of signals with closely spaced frequency components, while also changing the measured noise floor. Decreasing the bandwidth of an RBW filter decreases the measured noise floor and vice versa. This is due to higher RBW filters passing more frequency components through to the [[envelope detector]] than lower bandwidth RBW filters, therefore a higher RBW causes a higher measured noise floor.
| |
| | |
| === Video bandwidth ===
| |
| The '''video bandwidth''' filter or VBW filter is the [[low-pass filter]] directly after the [[envelope detector]]. It's the bandwidth of the signal chain after the detector. Averaging or peak detection then refers to how the digital storage portion of the device records samples—it takes several samples per time step and stores only one sample, either the average of the samples or the highest one.<ref name=plsa/> The video bandwidth determines the capability to discriminate between two different power levels.<ref name=plsa/> This is because a narrower VBW will remove noise in the detector output.<ref name=plsa/> This filter is used to “smooth” the display by removing noise from the envelope. Similar to the RBW, the VBW affects the sweep time of the display if the VBW is less than the RBW. If VBW is less than RBW, this relation for sweep time is useful:
| |
| | |
| :<math>t_\mathrm{sweep} = \frac{k (f_2 - f_1)}{\mathrm{RBW}\times \mathrm{VBW}}.</math>
| |
| | |
| Here ''t''<sub>sweep</sub> is the sweep time, ''k'' is a dimensionless proportionality constant, ''f''<sub>2</sub> − ''f''<sub>1</sub> is the frequency range of the sweep, RBW is the resolution bandwidth, and VBW is the video bandwidth.<ref>''[http://cp.literature.agilent.com/litweb/pdf/5952-0292.pdf Agilent Spectrum Analysis Basics]'', p. 36, August 2, 2006, accessed July 13, 2011.</ref>
| |
| | |
| === Detector ===
| |
| With the advent of digitally based displays, some modern spectrum analyzers use [[analog-to-digital converter]]s to sample spectrum amplitude after the VBW filter. Since displays have a discrete number of points, the frequency span measured is also digitised. '''Detectors''' are used in an attempt to adequately map the correct signal power to the appropriate frequency point on the display. There are in general three types of detectors: sample, peak, and average
| |
| *'''Sample detection''' – sample detection simply uses the midpoint of a given interval as the display point value. While this method does represent random noise well, it does not always capture all sinusoidal signals.
| |
| *'''Peak detection''' – peak detection uses the maximum measured point within a given interval as the display point value. This insures that the maximum sinusoid is measured within the interval; however, smaller sinusoids within the interval may not be measured. Also, peak detection does not give a good representation of random noise.
| |
| *'''Average detection''' – average detection uses all of the data points within the interval to consider the display point value. This is done by power ([[Root mean square|rms]]) averaging, voltage averaging, or log-power averaging.
| |
| | |
| === Displayed average noise level ===
| |
| The '''Displayed Average Noise Level''' (DANL) is just what it says it is—the average noise level displayed on the analyzer. This can either be with a specific resolution bandwidth (usually in dBm), or normalized to 1 Hz (usually in dBm/Hz)<ref>http://www.home.agilent.com/upload/cmc_upload/All/5952-0292EN.pdf Page 50</ref>
| |
| | |
| == Radio-frequency uses ==
| |
| [[File:8k_UHD_(7680_%C3%97_2160)_Demo_picture_showing_a_high_resolution_GSM_frequency_spectrum.jpg|360px|thumb|MCS software showing an ultra high resolution (8k UHD with 7680×2160 pixel) EMC test including some limit lines within the GSM frequency spectrum]]
| |
| Spectrum analyzers are widely used to measure the [[frequency response]], [[Electronic noise|noise]] and [[distortion]] characteristics of all kinds of [[radio-frequency]] (RF) circuitry, by comparing the input and output spectra.
| |
| | |
| In [[telecommunications]], spectrum analyzers are used to determine occupied bandwidth and track interference sources. For example, cell planners use this equipment to determine interference sources in the [[GSM frequency bands]] and [[UMTS frequency bands]].
| |
| | |
| In [[electromagnetic compatibility|EMC testing]], a spectrum analyzer is used for basic precompliance testing; however, it can not be used for full testing and certification. Instead, an EMI receiver like the [[Rohde & Schwarz]] [http://www2.rohde-schwarz.com/en/products/test_and_measurement/emc_field_strength/ESU.html ESU EMI Receiver], [[Agilent Technologies]] [http://www.home.agilent.com/agilent/application.jspx?nid=-34812.0.00&lc=eng&cc=US N9038A MXE EMI], or Gauss Instruments [http://www.gauss-instruments.com/products TDEMI] is used.
| |
| | |
| A spectrum analyzer is used to determine whether a wireless transmitter is working according to federally defined standards for purity of emissions. Output signals at frequencies other than the intended communications frequency appear as vertical lines (pips) on the display. A spectrum analyzer is also used to determine, by direct observation, the bandwidth of a digital or analog signal.
| |
| | |
| A spectrum analyzer interface is a device that connects to a wireless receiver or a personal computer to allow visual detection and analysis of electromagnetic signals over a defined band of frequencies. This is called panoramic reception and it is used to determine the frequencies of sources of interference to wireless networking equipment, such as Wi-Fi and wireless routers.
| |
| | |
| Spectrum analyzers can also be used to assess RF shielding. RF shielding is of particular importance for the siting of a magnetic resonance imaging machine since stray RF fields would result in artifacts in an MR image.<ref>http://www.aapm.org/pubs/reports/RPT_100.pdf</ref>
| |
| | |
| == Audio-frequency uses ==
| |
| Spectrum analysis can be used at [[Audio frequency|audio frequencies]] to analyse the harmonics of an audio signal. A typical application is to measure the [[distortion]] of a nominally [[sinewave]] signal; a very-low-distortion sinewave is used as the input to equipment under test, and a spectrum analyser can examine the output, which will have added distortion products, and determine the percentage distortion at each harmonic of the fundamental. Such analysers were at one time described as "wave analysers". Analysis can be carried out by a general-purpose [[digital computer]] with a [[sound card]] selected for suitable performance<ref>[http://www.clarisonus.com/Research%20Reports/RR001-SoundCardEval/RR001-PCsoundCards.html ClariSonus Research Report #001, PC Sound Card Evaluation,John Atwood, 2006.] Detailed tests of various sound cards for use as D/A and A/D converters for sound testing software on a PC</ref> and appropriate software. Instead of using a low-distortion sinewave, the input can be subtracted from the output, attenuated and phase-corrected, to give only the added distortion and noise, which can be analysed.<ref>[http://www.angelfire.com/ab3/mjramp/golopid6.html Renardson audio designs: Distortion measurement]</ref>
| |
| | |
| An alternative technique, [[THD analyzer|total harmonic distortion measurement]], cancels out the fundamental with a [[notch filter]] and measures the total remaining signal, which is total harmonic distortion plus noise; it does not give the harmonic-by-harmonic detail of an analyser.
| |
| | |
| == Optical spectrum analyzer ==
| |
| An optical spectrum analyzer uses reflective and/or refractive techniques to separate out the wavelengths of light. An electro-optical detector is used to measure the intensity of the light, which is then normally displayed on a screen in a similar manner to a radio- or audio-frequency spectrum analyser.
| |
| | |
| The input to an optical spectrum analyzer may be simply via an aperture in the instrument's case, an optical fiber or an optical connector to which a fiber-optic cable can be attached.
| |
| | |
| Different techniques exist for separating out the wavelengths. One method is to use a [[monochromator]], for example a Czerny-Turner design, with an optical detector placed at the output slit. As the grating in the monochromator moves, bands of different frequencies (colors) are 'seen' by the detector, and the resulting signal can then be plotted on a display.
| |
| | |
| The frequency response of optical spectrum analyzers tends to be relatively limited, e.g. {{nowrap|1600 - 800 nm}} (near-infrared to red), depending on the intended purpose, although (somewhat) wider-bandwidth general purpose instruments are available.
| |
| | |
| == See also ==
| |
| * [[Electrical measurements]]
| |
| * [[Electromagnetic spectrum]]
| |
| * [[Measuring receiver]]
| |
| * [[Radio frequency sweep]]
| |
| * [[Spectral leakage]]
| |
| * [[Spectral music]]
| |
| * [[Radio spectrum scope]]
| |
| * [[Spectrogram]]
| |
| * [[Spectrometer]]
| |
| | |
| == References ==
| |
| | |
| === Footnotes ===
| |
| {{Reflist}}
| |
| | |
| == External links ==
| |
| {{Commons category|Spectrum analyzers}}
| |
| * [http://www.ztecinstruments.com/zconnect/?p=1277 Fundamentals of Modern Spectral Analysis]
| |
| * [http://testrf.com/2010/spectrum-analyzer-tutorial/ Swept Spectrum Analyzer Tutorial and Basics]
| |
| * Sri Welaratna, "[http://www.dataphysics.com/resources/library-data-physics-center/30-years-of-fft-analyzers.html]", ''Sound and Vibration'' (January 1997, 30th anniversary issue). A historical review of hardware spectrum-analyzer devices.
| |
| * [http://www.radio-electronics.com/info/t_and_m/spectrum_analyser/rf-analyzer-basics-tutorial.php Spectrum Analyzer Tutorial] Covers various types of spectrum analyser, specifications and measurements.
| |
| | |
| {{Electrical and electronic measuring equipment}}
| |
| | |
| {{DEFAULTSORT:Spectrum Analyzer}}
| |
| [[Category:Electronic test equipment]]
| |
| [[Category:Laboratory equipment]]
| |
| [[Category:Radio technology]]
| |
| [[Category:Signal processing]]
| |
| [[Category:Spectroscopy]]
| |
| [[Category:Scattering]]
| |