|
|
(One intermediate revision by one other user not shown) |
Line 1: |
Line 1: |
| <!--{{continuum mechanics|cTopic=[[Solid mechanics]]}}-->
| | Her name is Felicidad Ahmad. Playing crochet is a factor that I'm completely addicted to. I currently live in Arizona but now I'm considering other choices. Bookkeeping is what I do for a residing.<br><br>Look into my web site :: [http://Www.gettingtherefromhere.info/User-Profile/userId/13851 Www.gettingtherefromhere.info] |
| [[File:YieldSurface.svg|right|300px|thumb|Surfaces on which the invariants <math>I_1</math>, <math>J_2</math>, <math>J_3</math> are constant. Plotted in principal stress space.]]
| |
| A '''yield surface''' is a five-dimensional surface in the six-dimensional space of [[Stress (mechanics)|stresses]]. The yield surface is usually [[convex polytope|convex]] and the state of stress of ''inside'' the yield surface is elastic. When the stress state lies on the surface the material is said to have reached its [[Yield (engineering)|yield point]] and the material is said to have become [[Plasticity (physics)|plastic]]. Further deformation of the material causes the stress state to remain on the yield surface, even though the shape and size the surface may change as the plastic deformation evolves. This is because stress states that lie outside the yield surface are non-permissible in [[plasticity (physics)|rate-independent plasticity]], though not in some models of [[viscoplasticity]].<ref name=Simo>Simo, J. C. and Hughes, T,. J. R., (1998), '''Computational Inelasticity''', Spinger.</ref>
| |
| | |
| The yield surface is usually expressed in terms of (and visualized in) a three-dimensional [[Stress (physics)#Principal_stresses_in_3-D|principal stress]] space (<math> \sigma_1, \sigma_2 , \sigma_3</math>), a two- or three-dimensional space spanned by [[Stress (physics)#Principal_stresses_in_3-D|stress invariants]] (<math> I_1, J_2, J_3</math>) or a version of the three-dimensional [[stress space|Haigh–Westergaard stress space]]. Thus we may write the equation of the yield surface (that is, the yield function) in the forms:
| |
| | |
| *<math> f(\sigma_1,\sigma_2,\sigma_3) = 0 \,</math> where <math>\sigma_i</math> are the principal stresses.
| |
| *<math> f(I_1, J_2, J_3) = 0 \,</math> where <math>I_1</math> is the first principal invariant of the Cauchy stress and <math>J_2, J_3</math> are the second and third principal invariants of the deviatoric part of the Cauchy stress.
| |
| *<math> f(p, q, r) = 0 \,</math> where <math>p, q</math> are scaled versions of <math>I_1</math> and <math>J_2</math> and <math>r</math> is a function of <math>J_2, J_3</math>.
| |
| *<math>f(\xi,\rho,\theta) = 0 \,</math> where <math>\xi,\rho</math> are scaled versions of <math>I_1</math> and <math>J_2</math>, and <math>\theta</math> is the '''Lode angle'''.
| |
| | |
| == Invariants used to describe yield surfaces ==
| |
| [[File:YieldSurfacerhoxitheta.svg|right|300px|thumb|Surfaces on which the invariants <math>\xi</math>, <math>\rho</math>, <math>\theta</math> are constant. Plotted in principal stress space.]]
| |
| The first principal invariant (<math>I_1</math>) of the [[stress (mechanics)|Cauchy stress]] (<math>\boldsymbol{\sigma}</math>), and the second and third principal invariants (<math>J_2, J_3</math>) of the ''deviatoric'' part (<math>\boldsymbol{s}</math>) of the Cauchy stress are defined as:
| |
| :<math>
| |
| \begin{align}
| |
| I_1 & = \text{Tr}(\boldsymbol{\sigma}) = \sigma_1 + \sigma_2 + \sigma_3 \\
| |
| J_2 & = \tfrac{1}{2} \boldsymbol{s}:\boldsymbol{s} =
| |
| \tfrac{1}{6}\left[(\sigma_1-\sigma_2)^2+(\sigma_2-\sigma_3)^2+(\sigma_3-\sigma_1)^2\right] \\
| |
| J_3 & = \det(\boldsymbol{s}) = \tfrac{1}{3} (\boldsymbol{s}\cdot\boldsymbol{s}):\boldsymbol{s}
| |
| = s_1 s_2 s_3
| |
| \end{align}
| |
| </math>
| |
| where (<math> \sigma_1, \sigma_2 , \sigma_3</math>) are the principal values of <math>\boldsymbol{\sigma}</math>, (<math>s_1, s_2, s_3</math>) are the principal values of <math>\boldsymbol{s}</math>, and
| |
| :<math>
| |
| \boldsymbol{s} = \boldsymbol{\sigma}-\tfrac{I_1}{3}\,\boldsymbol{I}
| |
| </math>
| |
| where <math>\boldsymbol{I}</math> is the identity matrix.
| |
| | |
| A related set of quantities, (<math>p, q, r\,</math>), are usually used to describe yield surfaces for [[cohesive frictional material]]s such as rocks, soils, and ceramics. These are defined as
| |
| :<math>
| |
| p = \tfrac{1}{3}~I_1 ~:~~
| |
| q = \sqrt{3~J_2} = \sigma_\mathrm{eq} ~;~~
| |
| r = 3\left(\tfrac{1}{2}\,J_3\right)^{1/3}
| |
| </math>
| |
| where <math>\sigma_\mathrm{eq}</math> is the '''equivalent stress'''. However, the possibility of negative values of <math>J_3</math> and the resulting imaginary <math>r</math> makes the use of these quantities problematic in practice.
| |
| | |
| Another related set of widely used invariants is (<math>\xi, \rho, \theta\,</math>) which describe a [[cylindrical coordinate system]] (the '''Haigh–Westergaard''' coordinates). These are defined as:
| |
| :<math>
| |
| \xi = \tfrac{1}{\sqrt{3}}~I_1 = \sqrt{3}~p ~;~~
| |
| \rho = \sqrt{2 J_2} = \sqrt{\tfrac{2}{3}}~q ~;~~
| |
| \cos(3\theta) = \left(\tfrac{r}{q}\right)^3 = \tfrac{3\sqrt{3}}{2}~\cfrac{J_3}{J_2^{3/2}}
| |
| </math>
| |
| The <math>\xi-\rho\,</math> plane is also called the '''Rendulic plane'''. The angle <math>\theta</math> is called the '''Lode angle'''<ref>Lode, W. (1926). '' Versuche über den Einfuss der mittleren Hauptspannung auf das Fliessen der Metalle Eisen Kupfer und Nickel''. Zeitung Phys., vol. 36, pp. 913–939.</ref> and the relation between <math>\theta</math> and <math>J_2,J_3</math> was first given by Nayak and Zienkiewicz in 1972 <ref>Nayak, G. C. and Zienkiewicz, O.C. (1972). ''Convenient forms of stress invariants for plasticity''. Proceedings of the ASCE Journal of the Structural Division, vol. 98, no. ST4, pp. 949–954.</ref>
| |
| | |
| The principal stresses and the Haigh–Westergaard coordinates are related by
| |
| :<math>
| |
| \begin{bmatrix} \sigma_1 \\ \sigma_2 \\ \sigma_3 \end{bmatrix} =
| |
| \tfrac{1}{\sqrt{3}} \begin{bmatrix} \xi \\ \xi \\ \xi \end{bmatrix} +
| |
| \sqrt{\tfrac{2}{3}}~\rho~\begin{bmatrix} \cos\theta \\ \cos\left(\theta-\tfrac{2\pi}{3}\right) \\ \cos\left(\theta+\tfrac{2\pi}{3}\right) \end{bmatrix}
| |
| = \tfrac{1}{\sqrt{3}} \begin{bmatrix} \xi \\ \xi \\ \xi \end{bmatrix} +
| |
| \sqrt{\tfrac{2}{3}}~\rho~\begin{bmatrix} \cos\theta \\ -\sin\left(\tfrac{\pi}{6}-\theta\right) \\ -\sin\left(\tfrac{\pi}{6}+\theta\right) \end{bmatrix} \,.
| |
| </math>
| |
| A different definition of the Lode angle can also be found in the literature:<ref name=chak>Chakrabarty, J., 2006, ''Theory of Plasticity: Third edition'', Elsevier, Amsterdam.</ref>
| |
| :<math>
| |
| \sin(3\theta) = -~\tfrac{3\sqrt{3}}{2}~\cfrac{J_3}{J_2^{3/2}}
| |
| </math>
| |
| in which case
| |
| :<math>
| |
| \begin{bmatrix} \sigma_1 \\ \sigma_2 \\ \sigma_3 \end{bmatrix} =
| |
| \tfrac{1}{\sqrt{3}} \begin{bmatrix} \xi \\ \xi \\ \xi \end{bmatrix} +
| |
| \sqrt{\tfrac{2}{3}}~\rho~\begin{bmatrix} \sin\left(\theta-\tfrac{2\pi}{3}\right) \\ \sin\theta \\ \sin\left(\theta+\tfrac{2\pi}{3}\right) \end{bmatrix}
| |
| = \tfrac{1}{\sqrt{3}} \begin{bmatrix} \xi \\ \xi \\ \xi \end{bmatrix} +
| |
| \sqrt{\tfrac{2}{3}}~\rho~\begin{bmatrix} -\cos\left(\tfrac{\pi}{6}-\theta\right) \\ \sin\theta \\ \cos\left(\tfrac{\pi}{6}+\theta\right) \end{bmatrix}
| |
| \,.
| |
| </math>
| |
| Whatever definition is chosen, the angle <math>\theta</math> varies between 0 degrees to +60 degrees.
| |
| | |
| == Examples of yield surfaces ==
| |
| | |
| There are several different yield surfaces known in engineering, and those most popular are listed below.
| |
| | |
| === Tresca yield surface ===
| |
| The Tresca yield criterion is taken to be the work of [[Henri Tresca]].<ref>Tresca, H. (1864). ''Mémoire sur l'écoulement des corps solides soumis à de fortes pressions.'' C.R. Acad. Sci. Paris, vol. 59, p. 754.</ref> It is also known as the ''maximum shear stress theory'' (MSST) and the Tresca–Guest (TG) criterion. In terms of the principal stresses the Tresca criterion is expressed as
| |
| :<math>\tfrac{1}{2}{\max(|\sigma_1 - \sigma_2| , |\sigma_2 - \sigma_3| , |\sigma_3 - \sigma_1| ) = S_{sy} = \tfrac{1}{2}S_y}\!</math>
| |
| Where <math>S_{sy}</math> is the yield strength in shear, and <math>S_y</math> is the tensile yield strength.
| |
| | |
| Figure 1 shows the Tresca–Guest yield surface in the three-dimensional space of principal stresses. It is a [[Prism (geometry)|prism]] of six sides and having infinite length. This means that the material remains elastic when all three principal stresses are roughly equivalent (a [[hydrostatic pressure]]), no matter how much it is compressed or stretched. However, when one of the principal stresses becomes smaller (or larger) than the others the material is subject to shearing. In such situations, if the shear stress reaches the yield limit then the material enters the plastic domain. Figure 2 shows the Tresca–Guest yield surface in two-dimensional stress space, it is a cross section of the prism along the <math> \sigma_1, \sigma_2</math> plane.
| |
| | |
| :{|
| |
| [[Image:Tresca Guest Yield Surface 3D.png|left|400px|thumb|Figure 1: View of Tresca–Guest yield surface in 3D space of principal stresses]]
| |
| [[Image:Tresca Guest Yield Surface 2D.png|none|200px|thumb|Figure 2: Tresca–Guest yield surface in 2D space (<math> \sigma_1, \sigma_2</math>)]]
| |
| |}
| |
| | |
| === von Mises yield surface ===
| |
| {{main|von Mises yield criterion}}
| |
| The von Mises yield criterion is expressed in the principal stresses as
| |
| :<math> {(\sigma_1 - \sigma_2)^2 + (\sigma_2 - \sigma_3)^2 + (\sigma_3 - \sigma_1)^2 = 2 {S_y}^2 }\!</math>
| |
| where <math>S_y</math> is the yield strength in uniaxial tension.
| |
| | |
| Figure 3 shows the von Mises yield surface in the three-dimensional space of principal stresses. It is a circular [[Cylinder (geometry)|cylinder]] of infinite length with its axis inclined at equal angles to the three principal stresses. Figure 4 shows the von Mises yield surface in two-dimensional space compared with Tresca–Guest criterion. A cross section of the von Mises cylinder on the plane of <math> \sigma_1, \sigma_2</math> produces the [[ellipse|elliptical]] shape of the yield surface.
| |
| | |
| :{|
| |
| [[Image:Mises Yield Surface 3D.png|left|400px|thumb|Figure 3: View of Huber–Mises–Hencky yield surface in 3D space of principal stresses]]
| |
| [[Image:Tresca stress 2D.png|none|200px|thumb|Figure 4: Comparison of Tresca–Guest and Huber–Mises–Hencky criteria in 2D space (<math> \sigma_1, \sigma_2</math>)]]
| |
| |}
| |
| | |
| ===Mohr–Coulomb yield surface===
| |
| {{Main|Mohr–Coulomb theory}}
| |
| The [[Mohr–Coulomb theory|Mohr–Coulomb yield (failure) criterion]] is similar to the Tresca criterion, with additional provisions for materials with different tensile and compressive yield strengths. This model is often used to model [[concrete]], [[soil]] or [[granular material]]s. The Mohr–Coulomb yield criterion may be expressed as:
| |
| :<math>
| |
| \frac{m+1}{2}\max \Big(|\sigma_1 - \sigma_2|+K(\sigma_1 + \sigma_2) ~,~~
| |
| |\sigma_1 - \sigma_3|+K(\sigma_1 + \sigma_3) ~,~~
| |
| |\sigma_2 - \sigma_3|+K(\sigma_2 + \sigma_3) \Big) = S_{yc}
| |
| </math>
| |
| where
| |
| :<math> m = \frac {S_{yc}}{S_{yt}}; K = \frac {m-1}{m+1}</math>
| |
| | |
| and the parameters <math>S_{yc}</math> and <math>S_{yt}</math> are the yield (failure) stresses of the material in uniaxial compression and tension, respectively. The formula reduces to the Tresca criterion if <math>S_{yc}=S_{yt}</math>.
| |
| | |
| Figure 5 shows Mohr–Coulomb yield surface in the three-dimensional space of principal stresses. It is a conical prism and <math>K</math> determines the inclination angle of conical surface. Figure 6 shows Mohr–Coulomb yield surface in two-dimensional stress space. It is a cross section of this conical prism on the plane of <math> \sigma_1, \sigma_2</math>.
| |
| :{|
| |
| [[Image:MH Yield Surface 3D.png|400px|left|thumb|Figure 5: View of Mohr–Coulomb yield surface in 3D space of principal stresses]]
| |
| [[Image:MH Surface 2D.png|250px|none|thumb|Figure 6: Mohr–Coulomb yield surface in 2D space (<math> \sigma_1, \sigma_2</math>)]]
| |
| |}
| |
| | |
| === Drucker–Prager yield surface===
| |
| {{Main|Drucker Prager yield criterion}}
| |
| The [[Drucker Prager|Drucker–Prager yield criterion]] is similar to the von Mises yield criterion, with provisions for handling materials with differing tensile and compressive yield strengths. This criterion is most often used for [[concrete]] where both normal and shear stresses can determine failure. The Drucker–Prager yield criterion may be expressed as
| |
| :<math> \bigg(\frac {m-1}{2}\bigg) ( \sigma_1 + \sigma_2 + \sigma_3 ) + \bigg(\frac{m+1}{2}\bigg)\sqrt{\frac{(\sigma_1 - \sigma_2)^2 + (\sigma_2 - \sigma_3)^2 + (\sigma_3 - \sigma_1)^2}{2}} = S_{yc} </math>
| |
| where
| |
| :<math> m = \frac{S_{yc}}{S_{yt}} </math>
| |
| and <math>S_{yc}</math>, <math>S_{yt}</math> are the uniaxial yield stresses in compression and tension respectively. The formula reduces to the von Mises equation if <math>S_{yc}=S_{yt}</math>.
| |
| | |
| Figure 7 shows Drucker–Prager yield surface in the three-dimensional space of principal stresses. It is a regular [[cone (geometry)|cone]]. Figure 8 shows Drucker–Prager yield surface in two-dimensional space. The elliptical elastic domain is a cross section of the cone on the plane of <math> \sigma_1, \sigma_2</math>; it can be chosen to intersect the Mohr–Coulomb yield surface in different number of vertices. One choice is to intersect the Mohr–Coulomb yield surface at three vertices on either side of the <math> \sigma_1 = -\sigma_2 </math> line, but usually selected by convention to be those in the compression regime.<ref>Khan and Huang. (1995), Continuum Theory of Plasticity. J.Wiley.</ref> Another choice is to intersect the Mohr–Coulomb yield surface at four vertices on both axes (uniaxial fit) or at two vertices on the diagonal <math> \sigma_1 = \sigma_2 </math> (biaxial fit). <ref>Neto, Periç, Owen. (2008), The mathematical Theory of Plasticity. J.Wiley.</ref> The Drucker-Prager yield criterion is also commonly expressed in terms of the [[Drucker_Prager_yield_criterion#Expressions_in_terms_of_cohesion_and_friction_angle|material cohesion and friction angle]].
| |
| | |
| {|
| |
| |-
| |
| | [[Image:Drucker Prager Yield Surface 3D.png|400px|left|thumb|Figure 7: View of Drucker–Prager yield surface in 3D space of principal stresses]] || [[Image:Drucker Prager WIKI.png|740px|none|thumb|Figure 8: View of Drucker–Prager yield surface in 2D space of principal stresses]]
| |
| |}
| |
| | |
| ===Bresler–Pister yield surface===
| |
| {{Main|Bresler Pister yield criterion}}
| |
| The Bresler–Pister yield criterion is an extension of the [[Drucker Prager yield criterion]] that uses three parameters, and has additional terms for materials that yield under hydrostatic compression.
| |
| In terms of the principal stresses, this yield criterion may be expressed as
| |
| :<math>
| |
| S_{yc} = \tfrac{1}{\sqrt{2}}\left[(\sigma_1-\sigma_2)^2+(\sigma_2-\sigma_3)^2+(\sigma_3-\sigma_1)^2\right]^{1/2} - c_0 - c_1~(\sigma_1+\sigma_2+\sigma_3) - c_2~(\sigma_1+\sigma_2+\sigma_3)^2
| |
| </math>
| |
| where <math>c_0, c_1, c_2 </math> are material constants. The additional parameter <math>c_2</math> gives the yield surface an [[ellipse|ellipsoidal]] cross section when viewed from a direction perpendicular to its axis. If <math>\sigma_c</math> is the yield stress in uniaxial compression, <math>\sigma_t</math> is the yield stress in uniaxial tension, and <math>\sigma_b</math> is the yield stress in biaxial compression, the parameters can be expressed as
| |
| :<math>
| |
| \begin{align}
| |
| c_1 = & \left(\cfrac{\sigma_t-\sigma_c}{(\sigma_t+\sigma_c)}\right)
| |
| \left(\cfrac{4\sigma_b^2 - \sigma_b(\sigma_c+\sigma_t) + \sigma_c\sigma_t}{4\sigma_b^2 + 2\sigma_b(\sigma_t-\sigma_c) - \sigma_c\sigma_t} \right) \\
| |
| c_2 = & \left(\cfrac{1}{(\sigma_t+\sigma_c)}\right)
| |
| \left(\cfrac{\sigma_b(3\sigma_t-\sigma_c) -2\sigma_c\sigma_t}{4\sigma_b^2 + 2\sigma_b(\sigma_t-\sigma_c) - \sigma_c\sigma_t} \right) \\
| |
| c_0 = & \sigma_c +\sqrt{3}(c_1\sigma_c -c_2\sigma_c^2)
| |
| \end{align}
| |
| </math>
| |
| | |
| <!--{{verify section}}--> | |
| :{|
| |
| [[Image:Bresler Pister Yield Surface 3D.png|400px|left|thumb|Figure 9: View of Bresler–Pister yield surface in 3D space of principal stresses]]
| |
| [[Image:Bresler Pister Surface 2D.png|200px|none|thumb|Figure 10: Bresler–Pister yield surface in 2D space (<math> \sigma_1, \sigma_2</math>)]]
| |
| |}
| |
| | |
| ===Willam–Warnke yield surface===
| |
| {{Main|Willam Warnke yield criterion}}
| |
| The [[Willam Warnke yield criterion|Willam–Warnke yield criterion]] is a three-parameter smoothed version of the [[Mohr–Coulomb theory|Mohr–Coulomb yield criterion]] that has similarities in form to the [[Drucker Prager|Drucker–Prager]] and [[Bresler Pister yield criterion|Bresler–Pister]] yield criteria.
| |
| | |
| The yield criterion has the functional form
| |
| :<math> | |
| f(I_1, J_2, J_3) = 0 ~.
| |
| </math>
| |
| However, it is more commonly expressed in Haigh–Westergaard coordinates as
| |
| :<math>
| |
| f(\xi, \rho, \theta) = 0 ~.
| |
| </math>
| |
| The cross-section of the surface when viewed along its axis is a smoothed triangle (unlike Mohr–Coulumb). The Willam–Warnke yield surface is convex and has unique and well defined first and second derivatives on every point of its surface. Therefore the Willam–Warnke model is computationally robust and has been used for a variety of cohesive-frictional materials.
| |
| :{|
| |
| [[Image:Willam Warnke Yield Surface 3Da.png|300px|left|thumb|Figure 11: View of Willam–Warnke yield surface in 3D space of principal stresses]] [[Image:Willam Warnke Yield Surface 3Db.png|300px|none|thumb|Figure 12: Willam–Warnke yield surface in the <math>\pi</math>-plane]]
| |
| |}
| |
| | |
| ===Bigoni–Piccolroaz yield surface===
| |
| The [[Bigoni Piccolroaz yield criterion|Bigoni–Piccolroaz yield criterion]] <ref>Bigoni, D. Nonlinear Solid Mechanics: Bifurcation Theory and Material Instability. Cambridge University Press, 2012 . ISBN 9781107025417.</ref><ref name=BP>Bigoni, D. and Piccolroaz, A., (2004), Yield criteria for quasibrittle and frictional materials, ''International Journal of Solids and Structures'' '''41''', 2855-2878.</ref> is a seven-parameter surface defined by
| |
| | |
| :<math>
| |
| f(p,q,\theta) = F(p) + \frac{q}{g(\theta)} = 0,
| |
| </math>
| |
| | |
| where <math>F(p)</math> is the “meridian” function
| |
| | |
| :<math>
| |
| F(p) =
| |
| \left\{
| |
| \begin{array}{ll}
| |
| -M p_c \sqrt{(\phi - \phi^m)[2(1 - \alpha)\phi + \alpha]}, & \phi \in [0,1], \\
| |
| +\infty, & \phi \notin [0,1],
| |
| \end{array}
| |
| \right.
| |
| </math>
| |
| | |
| :<math>
| |
| \phi = \frac{p + c}{p_c + c},
| |
| </math>
| |
| | |
| describing the pressure-sensitivity and <math>g(\theta)</math> is the “deviatoric” function
| |
| | |
| :<math>
| |
| g(\theta) = \frac{1}{\cos[\beta \frac{\pi}{6} - \frac{1}{3} \cos^{-1}(\gamma \cos 3\theta)]},
| |
| </math>
| |
| | |
| describing the Lode-dependence of yielding. The seven, non-negative material parameters:
| |
| | |
| :<math>
| |
| \underbrace{M > 0,~ p_c > 0,~ c \geq 0,~ 0 < \alpha < 2,~ m > 1}_{\mbox{defining}~\displaystyle{F(p)}},~~~
| |
| \underbrace{0\leq \beta \leq 2,~ 0 \leq \gamma < 1}_{\mbox{defining}~\displaystyle{g(\theta)}},
| |
| </math>
| |
| | |
| define the shape of the meridian and deviatoric sections.
| |
| | |
| This criterion represents a smooth and convex surface, which is closed both in hydrostatic tension and compression and has a
| |
| drop-like shape, particularly suited to describe frictional and granular materials. This criterion has also been generalized to the case of surfaces with corners.<ref name=BP2>Piccolroaz, A. and Bigoni, D. (2009), Yield criteria for quasibrittle and frictional materials: a generalization to surfaces with corners, ''International Journal of Solids and Structures'' '''46''', 3587-3596.</ref>
| |
| | |
| {{multiple image
| |
| | align = none
| |
| | footer = Bigoni-Piccolroaz yield surface
| |
| | image1 = Supbp1.png
| |
| | width1 = 350
| |
| | alt1 = 3D
| |
| | caption1 = In 3D space of principal stresses
| |
| | image2 = Supbp2.png
| |
| | width2 = 280
| |
| | alt2 = <math>\pi</math>-plane
| |
| | caption2 = In the <math>\pi</math>-plane
| |
| }}
| |
| | |
| ==See also==
| |
| * [[Yield (engineering)]]
| |
| * [[Plasticity (physics)]]
| |
| * [[Stress (physics)|Stress]]
| |
| * [[Henri Tresca]]
| |
| * [[von Mises stress]]
| |
| * [[Mohr–Coulomb theory]]
| |
| * [[Strain (materials science)|Strain]]
| |
| * [[Strain tensor]]
| |
| * [[Stress-energy tensor]]
| |
| * [[Stress concentration]]
| |
| * [[3-D elasticity]]
| |
| | |
| == References ==
| |
| <references/>
| |
| | |
| [[Category:Plasticity]]
| |
| [[Category:Solid mechanics]]
| |
| [[Category:Continuum mechanics]]
| |
| [[Category:Materials science]]
| |