Stationary sequence: Difference between revisions

From formulasearchengine
Jump to navigation Jump to search
en>Edward
 
en>Mark viking
Added wl
Line 1: Line 1:
Let me initial begin by introducing myself. My name is Boyd Butts although it is not over the counter std test [[http://www.animecontent.com/blog/436250 just click the following internet site]] title on my birth certificate. I am a meter reader but I plan on altering it. To collect cash is what his family and him appreciate. California is our birth place.
The '''Mason equation''' is an approximate analytical expression for the growth (due to [[condensation]]) or [[evaporation]] of a water droplet&mdash;it is due to the meteorologist [[Basil John Mason|B. J. Mason]].<ref name=Mason>1. B. J. Mason ''The Physics of Clouds'' (1957) Oxford Univ. Press.</ref> The expression is found by recognising that mass [[diffusion]] towards the water drop in a supersaturated environment transports energy as [[latent heat]], and this has to be balanced by the diffusion of [[sensible heat]] back across the [[boundary layer]], (and the energy of heatup of the drop, but for a cloud-sized drop this last term is usually small).
 
== Equation ==
 
In Mason's formulation the changes in temperature across the boundary layer can be related to the changes in saturated vapour pressure by the [[Clausius-Clapeyron relation]]; the two energy transport terms must be nearly equal but opposite in sign and so this sets the interface temperature of the drop. The resulting expression for the growth rate is significantly lower than that expected if the drop were not warmed by the latent heat.
 
Thus if the drop has a size ''r'', the inward mass flow rate is given by<ref name=Mason/>
 
::<math> \frac{dM}{dt} = 4 \pi r_{p} D_{v} (\rho_{0} - \rho_{w} ) \,</math>
 
and the sensible [[heat flux]] by<ref name=Mason/>
 
::<math> \frac{dQ}{dt} = 4 \pi r_{p} K (T_{0} - T_{w}) \,</math>
 
and the final expression for the growth rate is<ref name=Mason/>
 
:: <math>r \frac{dr}{dt} = \frac {(S-1)} { [(L/RT-1) \cdot L \rho_l /K T_0 + (\rho_l R T_0)/ (D \rho_v) ]}</math>
 
where
* ''S'' is the [[supersaturation]] far from the drop
* ''L'' is the [[latent heat]]
* ''K'' is the vapour [[thermal conductivity]]
* ''D'' is the binary [[diffusion coefficient]]
* ''R'' is the [[gas constant]]
 
==References==
 
<references/>
 
[[Category:Thermodynamic equations]]
[[Category:Atmospheric thermodynamics]]
[[Category:Equations]]
 
 
{{climate-stub}}

Revision as of 06:37, 16 September 2013

The Mason equation is an approximate analytical expression for the growth (due to condensation) or evaporation of a water droplet—it is due to the meteorologist B. J. Mason.[1] The expression is found by recognising that mass diffusion towards the water drop in a supersaturated environment transports energy as latent heat, and this has to be balanced by the diffusion of sensible heat back across the boundary layer, (and the energy of heatup of the drop, but for a cloud-sized drop this last term is usually small).

Equation

In Mason's formulation the changes in temperature across the boundary layer can be related to the changes in saturated vapour pressure by the Clausius-Clapeyron relation; the two energy transport terms must be nearly equal but opposite in sign and so this sets the interface temperature of the drop. The resulting expression for the growth rate is significantly lower than that expected if the drop were not warmed by the latent heat.

Thus if the drop has a size r, the inward mass flow rate is given by[1]

dMdt=4πrpDv(ρ0ρw)

and the sensible heat flux by[1]

dQdt=4πrpK(T0Tw)

and the final expression for the growth rate is[1]

rdrdt=(S1)[(L/RT1)Lρl/KT0+(ρlRT0)/(Dρv)]

where

References

  1. 1.0 1.1 1.2 1.3 1. B. J. Mason The Physics of Clouds (1957) Oxford Univ. Press.


Hello, I'm Willard, a 30 year old from Capodimonte, Italy.
My hobbies include (but are not limited to) Photography, Equestrianism and watching 2 Broke Girls.

Feel free to visit my webpage Hostgator Voucher