Brumer–Stark conjecture

The projection method is an effective means of numerically solving time-dependent incompressible fluid-flow problems. It was originally introduced by Alexandre Chorin in 1967 and independently by Roger Temam as an efficient means of solving the incompressible Navier-Stokes equations. The key advantage of the projection method is that the computations of the velocity and the pressure fields are decoupled.

The algorithm

The algorithm of projection method is based on the Helmholtz decomposition (sometimes called Helmholtz-Hodge decomposition) of any vector field into a solenoidal part and an irrotational part. Typically, the algorithm consists of two stages. In the first stage, an intermediate velocity that does not satisfy the incompressibility constraint is computed at each time step. In the second, the pressure is used to project the intermediate velocity onto a space of divergence-free velocity field to get the next update of velocity and pressure.

Helmholtz–Hodge decomposition

The theoretical background of projection type method is the decomposition theorem of Ladyzhenskaya sometimes referred to as Helmholtz–Hodge Decomposition or simply as Hodge decomposition. It states that the vector field $\mathbf {u}$ defined on a simply connected domain can be uniquely decomposed into a divergence-free (solenoidal) part $\mathbf {u} _{\text{sol}}$ and an irrotational part $\mathbf {u} _{\text{irrot}}$. Thus,

$\mathbf {u} =\mathbf {u} _{\text{sol}}+\mathbf {u} _{\text{irrot}}=\mathbf {u} _{\text{sol}}+\nabla \phi$

since $\nabla \times \nabla \phi =0$ for some scalar function, $\,\phi$. Taking the divergence of equation yields

$\nabla \cdot \mathbf {u} =\nabla ^{2}\phi \qquad ({\text{since,}}\;\nabla \cdot \mathbf {u} _{\text{sol}}=0)$

This is a Poisson equation for the scalar function $\,\phi$. If the vector field $\mathbf {u}$ is known, the above equation can be solved for the scalar function $\,\phi$ and the divergence-free part of $\mathbf {u}$ can be extracted using the relation

$\mathbf {u} _{\text{sol}}=\mathbf {u} -\nabla \phi$

This is the essence of solenoidal projection method for solving incompressible Navier–Stokes equations.

Chorin's projection method

The incompressible Navier-Stokes equation (differential form of momentum equation) may be written as

${\frac {\partial \mathbf {u} }{\partial t}}+(\mathbf {u} \cdot \nabla )\mathbf {u} =-{\frac {1}{\rho }}\nabla p+\nu \nabla ^{2}\mathbf {u}$

In Chorin's original version of the projection method , the intermediate velocity, $\mathbf {u} ^{*}$, is explicitly computed using the momentum equation ignoring the pressure gradient term:

$\quad (1)\qquad {\frac {\mathbf {u} ^{*}-\mathbf {u} ^{n}}{\Delta t}}=-(\mathbf {u} ^{n}\cdot \nabla )\mathbf {u} ^{n}+\nu \nabla ^{2}\mathbf {u} ^{n}$

where $\mathbf {u} ^{n}$ is the velocity at $\,n$^th time level. In the next (projection) step, we have

${\frac {\mathbf {u} ^{n+1}-\mathbf {u} ^{*}}{\Delta t}}=-{\frac {1}{\rho }}\,\nabla p^{n+1}$

Re-writing the above equation for the velocity at $\,(n+1)$ level, we have

$\quad (2)\qquad \mathbf {u} ^{n+1}=\mathbf {u} ^{*}-{\frac {\Delta t}{\rho }}\,\nabla p^{n+1}$

Computing the right-hand side of the above equation requires a knowledge of the pressure, $\,p$, at $\,(n+1)$ level. This is obtained by taking the divergence and requiring that $\nabla \cdot \mathbf {u} ^{n+1}=0$, which is the divergence-free(continuity) condition, thereby deriving the following Poisson equation for $\,p^{n+1}$,

$\nabla ^{2}p^{n+1}={\frac {\rho }{\Delta t}}\,\nabla \cdot \mathbf {u} ^{*}$

It is instructive to note that, the equation written in the following way

$\mathbf {u} ^{*}=\mathbf {u} ^{n+1}+{\frac {\Delta t}{\rho }}\,\nabla p^{n+1}$

is the standard Hodge decomposition if boundary condition for $\,p$ on the domain boundary, $\partial \Omega$ is $\nabla p^{n+1}\cdot \mathbf {n} =0$.

For the explicit method, the boundary condition for $\mathbf {u} ^{*}$ in equation (1) is natural. If $\mathbf {u} \cdot \mathbf {n} =0$ on $\partial \Omega$, is prescribed, then the space of divergence-free vector field will be orthogonal to the space of irrotational vector fields, and from equation (2) one has

${\frac {\partial p^{n+1}}{\partial n}}=0\qquad {\text{on}}\quad \partial \Omega$

The explicit treatment of the boundary condition may be circumvented by using a staggered grid and requiring that $\nabla \cdot \mathbf {u} ^{n+1}$ vanish at the pressure nodes that are adjacent to the boundaries.

A distinguishing feature of Chorin's projection method is that the velocity field is forced to satisfy a discrete continuity constraint at the end of each time step.

General method

Typically the projection method operates as a two-stage fractional step scheme, a method which uses multiple calculation steps for each numerical time-step. In many projection algorithms, the steps are split as follows:

1. First the system is progressed in time to a mid-time-step position, solving the above transport equations for mass and momentum using a suitable advection method. This is denoted the predictor step.
2. At this point an initial projection may be implemented such that the mid-time-step velocity field is enforced as divergence free.
3. The corrector part of the algorithm is then progressed. These use the time-centred estimates of the velocity, density, etc. to form final time-step state.
4. A final projection is then applied to enforce the divergence restraint on the velocity field. The system has now been fully updated to the new time.

References

43 year old Petroleum Engineer Harry from Deep River, usually spends time with hobbies and interests like renting movies, property developers in singapore new condominium and vehicle racing. Constantly enjoys going to destinations like Camino Real de Tierra Adentro.