Extinction ratio

From formulasearchengine
Revision as of 08:36, 20 June 2013 by en>Nilaysoft
Jump to navigation Jump to search

Template:No footnotes In telecommunication, free-space path loss (FSPL) is the loss in signal strength of an electromagnetic wave that would result from a line-of-sight path through free space (usually air), with no obstacles nearby to cause reflection or diffraction. It does not include factors such as the gain of the antennas used at the transmitter and receiver, nor any loss associated with hardware imperfections. A discussion of these losses may be found in the article on link budget.

Free-space path loss formula

Free-space path loss is proportional to the square of the distance between the transmitter and receiver, and also proportional to the square of the frequency of the radio signal.

The equation for FSPL is

FSPL=(4πdλ)2=(4πdfc)2

where:

This equation is only accurate in the far field where spherical spreading can be assumed; it does not hold close to the transmitter.

Free-space path loss in decibels

A convenient way to express FSPL is in terms of dB:

FSPL(dB)=10log10((4πcdf)2)=20log10(4πcdf)=20log10(d)+20log10(f)+20log10(4πc)=20log10(d)+20log10(f)147.55

where the units are as before.

For typical radio applications, it is common to find f measured in units of GHz and d in km, in which case the FSPL equation becomes

FSPL(dB)=20log10(d)+20log10(f)+92.45

For d,f in meters and kilohertz, respectively, the constant becomes 87.55 . For d,f in meters and megahertz, respectively, the constant becomes 27.55 . For d,f in kilometers and megahertz, respectively, the constant becomes 32.45 .

Physical explanation

The FSPL expression above often leads to the erroneous belief that free space attenuates an electromagnetic wave according to its frequency. This is not the case, as there is no physical mechanism that could cause this.

The expression for FSPL actually encapsulates two effects. Firstly, the spreading out of electromagnetic energy in free space is determined by the inverse square law, i.e.

S=Pt14πd2

where:

  • S is the power per unit area or power spatial density (in watts per metre-squared) at distance d,
  • Pt is the total power transmitted (in watts).

Note that this is not a frequency-dependent effect.

The second effect is that of the receiving antenna's aperture, which describes how well an antenna can pick up power from an incoming electromagnetic wave. For an isotropic antenna, this is given by

Pr=Sλ24π

where Pr is the received power. Note that this is entirely dependent on wavelength, which is how the frequency-dependent behaviour arises.

The total loss is given by the ratio

FSPL=PtPr

which can be found by combining the previous two expressions.

See also

Further reading

  • C.A. Balanis, "Antenna Theory", 2003, John Wiley and Sons Inc.


External references

References

43 year old Petroleum Engineer Harry from Deep River, usually spends time with hobbies and interests like renting movies, property developers in singapore new condominium and vehicle racing. Constantly enjoys going to destinations like Camino Real de Tierra Adentro.