Topologically stratified space

From formulasearchengine
Revision as of 12:12, 29 May 2013 by en>Tobias Bergemann (Disambiguate John Mather to John Mather (mathematician))
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

The Mayo–Lewis equation or copolymer equation in polymer chemistry describes the distribution of monomers in a copolymer:[1] It is named for Frank R. Mayo and Frederick M. Lewis.

Taking into consideration a monomer mix of two components M1 and M2 and the four different reactions that can take place at the reactive chain end terminating in either monomer (M*) with their reaction rate constants k:

M1*+M1k11M1M1*
M1*+M2k12M1M2*
M2*+M2k22M2M2*
M2*+M1k21M2M1*

and with reactivity ratios defined as:

r1=k11k12
r2=k22k21

the copolymer equation is given as:

d[M1]d[M2]=[M1](r1[M1]+[M2])[M2]([M1]+r2[M2])

with the concentration of the components given in square brackets. The equation gives the copolymer composition at any instant during the polymerization.

Limiting cases

From this equation several limiting cases can be derived:

  • r1=r2>>1 with both reactivity ratios very high the two monomers have no inclination to react to each other except with themselves leading to a mixture of two homopolymers.
  • r1=r2>1 with both ratios larger than 1, homopolymerization of component M_1 is favored but in the event of a crosspolymerization by M_2 the chain-end will continue as such giving rise to block copolymer
  • r1=r21 with both ratios around 1, monomer 1 will react as fast with another monomer 1 or monomer 2 and a random copolymer results.
  • r1=r20 with both values approaching 0 the monomers are unable to react in homopolymerization and the result is an alternating polymer
  • r1>>1>>r2 In the initial stage of the copolymerization monomer 1 is incorporated faster and the copolymer is rich in monomer 1. When this monomer gets depleted, more monomer 2 segments are added. This is called composition drift.

An example is maleic anhydride and stilbene, with reactivity ratio:

  • Maleic anhydride (r1 = 0.08) & cis-stilbene (r2, = 0.07)
  • Maleic anhydride (r1 = 0.03) & trans-stilbene (r2, = 0.03)

Both of these compounds do not homopolymerize and instead, they react together to give exclusively alternating copolymer.

Another form of the equation is:

F1=1F2=r1f12+f1f2r1f12+2f1f2+r2f22

where F stands the mole fraction of each monomer in the copolymer:

F1=1F2=dM1d(M1+M2)

and f the mole fraction of each monomer in the feed:

f1=1f2=M1(M1+M2)

When the copolymer composition has the same composition as the feed, this composition is called the azeotrope.

Calculation of reactivity ratios

The reactivity ratios can be obtained by rewriting the copolymer equation to:

f(1F)F=r2r1(f2F)

with

f=[M1][M2] in the feed

and

F=d[M1]d[M2] in the copolymer

A number of copolymerization experiments are conducted with varying monomer ratios and the copolymer composition is analysed at low conversion. A plot of f(1F)F versus f2F gives a straight line with slope r1 and intercept r2.

A semi-empirical method for the determination of reactivity ratios is called the Q-e scheme.

Equation derivation

Monomer 1 is consumed with reaction rate:[2]

d[M1]dt=k11[M1][M1*]+k21[M1][M2*]

with [Mx*] the concentration of all the active centers terminating in monomer 1 or 2.

Likewise the rate of disappearance for monomer 2 is:

d[M2]dt=k12[M2][M1*]+k22[M2][M2*]

Division of both equations yields:

d[M1]d[M2]=[M1][M2](k11[M1*][M2*]+k21k12[M1*][M2*]+k22)

The ratio of active center concentrations can be found assuming steady state with:

d[M1*]dt=d[M2*]dt0

meaning that the concentration of active centres remains constant, the rate of formation for active center of monomer 1 is equal to the rate of their destruction or:

k21[M1][M2*]=k12[M2][M1*]

or

[M1*][M2*]=k21[M1]k12[M2]

External links

  • copolymer equation applet @eng.utah.edu Link
  • copolymers @zeus.plmsc.psu.edu Link

References

43 year old Petroleum Engineer Harry from Deep River, usually spends time with hobbies and interests like renting movies, property developers in singapore new condominium and vehicle racing. Constantly enjoys going to destinations like Camino Real de Tierra Adentro.

  1. Copolymerization. I. A Basis for Comparing the Behavior of Monomers in Copolymerization; The Copolymerization of Styrene and Methyl Methacrylate Frank R. Mayo and Frederick M. Lewis J. Am. Chem. Soc.; 1944; 66(9) pp 1594 - 1601; Electronic Instrument Positions Staff (Standard ) Cameron from Clarence Creek, usually spends time with hobbies and interests which include knotting, property developers in singapore apartment For sale and boomerangs. Has enrolled in a world contiki journey. Is extremely thrilled specifically about visiting .
  2. 20 year-old Real Estate Agent Rusty from Saint-Paul, has hobbies and interests which includes monopoly, property developers in singapore and poker. Will soon undertake a contiki trip that may include going to the Lower Valley of the Omo.

    My blog: http://www.primaboinca.com/view_profile.php?userid=5889534