|
|
| Line 1: |
Line 1: |
| [[Image:Components stress tensor cartesian.svg|370px|right|thumb|Figure 2.3 Components of stress in three dimensions]]
| | The writer is known as Wilber Pegues. To play lacross is the factor I love most of all. My working day job is a journey agent. Alaska is where he's always been living.<br><br>my blog: are psychics real ([http://kard.dk/?p=24252 http://kard.dk/?p=24252]) |
| In [[continuum mechanics]], the '''Cauchy stress tensor''' <math>\boldsymbol\sigma\,\!</math>, '''true stress tensor''',<ref name=Irgens/> or simply called the '''stress tensor''', named after [[Augustin-Louis Cauchy]], is a second order [[tensor]] of [[type of a tensor|type (2,0)]] (that is, a [[linear map]]), with nine components <math>\sigma_{ij}\,\!</math> that completely define the state of [[stress (mechanics)|stress]] at a point inside a material in the deformed placement or configuration. The tensor relates a unit-length direction vector '''n''' to the stress vector '''T'''<sup>('''n''')</sup> across an imaginary surface perpendicular to '''n''':
| |
| | |
| :<math>\mathbf{T}^{(\mathbf n)}= \mathbf n \cdot\boldsymbol{\sigma}\quad \text{or} \quad T_j^{(n)}= \sigma_{ij}n_i.\,\!</math>
| |
| | |
| where,
| |
| | |
| :<math>\boldsymbol{\sigma}=
| |
| \left[{\begin{matrix}
| |
| \sigma _{11} & \sigma _{12} & \sigma _{13} \\
| |
| \sigma _{21} & \sigma _{22} & \sigma _{23} \\
| |
| \sigma _{31} & \sigma _{32} & \sigma _{33} \\
| |
| \end{matrix}}\right]
| |
| | |
| \equiv \left[{\begin{matrix}
| |
| \sigma _{xx} & \sigma _{xy} & \sigma _{xz} \\
| |
| \sigma _{yx} & \sigma _{yy} & \sigma _{yz} \\
| |
| \sigma _{zx} & \sigma _{zy} & \sigma _{zz} \\
| |
| \end{matrix}}\right]
| |
| \equiv \left[{\begin{matrix}
| |
| \sigma _x & \tau _{xy} & \tau _{xz} \\
| |
| \tau _{yx} & \sigma _y & \tau _{yz} \\
| |
| \tau _{zx} & \tau _{zy} & \sigma _z \\
| |
| \end{matrix}}\right]
| |
| \,\!</math>
| |
| | |
| The Cauchy stress tensor obeys the tensor transformation law under a change in the system of coordinates. A graphical representation of this transformation law is the [[Mohr's circle]] for stress.
| |
| | |
| The Cauchy stress tensor is used for stress analysis of material bodies experiencing [[Infinitesimal strain theory|small deformations]]: It is a central concept in the [[linear elasticity|linear theory of elasticity]]. For large deformations, also called [[Finite strain theory|finite deformations]], other measures of stress are required, such as the [[Stress (mechanics)#Alternative_measures_of_stress|Piola–Kirchhoff stress tensor]], the [[Biot stress tensor]], and the [[Kirchhoff stress tensor]].
| |
| | |
| According to the principle of [[conservation of linear momentum]], if the continuum body is in static equilibrium it can be demonstrated that the components of the Cauchy stress tensor in every material point in the body satisfy the equilibrium equations ([[Cauchy momentum equation|Cauchy's equations of motion]] for zero acceleration). At the same time, according to the principle of [[conservation of angular momentum]], equilibrium requires that the summation of [[Torque|moments]] with respect to an arbitrary point is zero, which leads to the conclusion that the [[Stress (mechanics)#Equilibrium equations and symmetry of the stress tensor|stress tensor is symmetric]], thus having only six independent stress components, instead of the original nine.
| |
| | |
| There are certain invariants associated with the stress tensor, whose values do not depend upon the coordinate system chosen, or the area element upon which the stress tensor operates. These are the three [[eigenvalues]] of the stress tensor, which are called the [[#Principal stresses and stress invariants|principal stresses]].
| |
| | |
| == Euler-Cauchy stress principle - stress vector ==
| |
| {{main|Continuum mechanics}}
| |
| [[Image:Internal forces in continuum.svg|370px|right|thumb|Figure 2.1a Internal distribution of contact forces and couple stresses on a differential <math>dS\,\!</math> of the internal surface <math>S\,\!</math> in a continuum, as a result of the interaction between the two portions of the continuum separated by the surface]]
| |
| [[Image:Internal forces in continuum 2.svg|370px|right|thumb|Figure 2.1b Internal distribution of contact forces and couple stresses on a differential <math>dS\,\!</math> of the internal surface <math>S\,\!</math> in a continuum, as a result of the interaction between the two portions of the continuum separated by the surface]]
| |
| [[Image:stress vector.svg|370px|right|thumb|Figure 2.1c Stress vector on an internal surface S with normal vector n. Depending on the orientation of the plane under consideration, the stress vector may not necessarily be perpendicular to that plane, ''i.e.'' parallel to <math>\mathbf{n}\,\!</math>, and can be resolved into two components: one component normal to the plane, called ''normal stress'' <math>\sigma_\mathrm{n} \,\!</math>, and another component parallel to this plane, called the ''shearing stress'' <math>\tau \,\!</math>.]]
| |
| | |
| The '''Euler–Cauchy stress principle''' states that ''upon any surface (real or imaginary) that divides the body, the action of one part of the body on the other is equivalent (equipollent) to the system of distributed forces and couples on the surface dividing the body'',<ref name=Truesdell/> and it is represented by a field <math>\mathbf{T}^{(\mathbf{n})}</math>, called the stress vector, defined on the surface <math>S\,\!</math> and assumed to depend continuously on the surface's unit vector <math>\mathbf n\,\!</math>.<ref name=Chadwick/><ref name=Fung/>{{rp|p.66–96}}
| |
| | |
| To formulate the Euler–Cauchy stress principle, consider an imaginary surface <math>S\,\!</math> passing through an internal material point <math>P\,\!</math> dividing the continuous body into two segments, as seen in Figure 2.1a or 2.1b (one may use either the cutting plane diagram or the diagram with the arbitrary volume inside the continuum enclosed by the surface <math>S\,\!</math>). | |
| | |
| Following the classical dynamics of [[Isaac Newton|Newton]] and [[Leonhard Euler|Euler]], the motion of a material body is produced by the action of externally applied [[force]]s which are assumed to be of two kinds: [[surface forces]] <math>\mathbf F</math> and body forces <math>\mathbf b</math>.<ref name=Smith>Smith & Truesdell p.97</ref> Thus, the total force <math>\mathcal F</math> applied to a body or to a portion of the body can be expressed as:
| |
| | |
| :<math>\mathcal F = \mathbf b + \mathbf F</math>
| |
| | |
| Only surface forces will be discussed in this article as they are relevant to the Cauchy stress tensor.
| |
| | |
| When the body is subjected to external surface forces or ''contact forces'' <math>\mathbf F\,\!</math>, following [[Euler's laws|Euler's equations of motion]], internal contact forces and moments are transmitted from point to point in the body, and from one segment to the other through the dividing surface <math>S\,\!</math>, due to the mechanical contact of one portion of the continuum onto the other (Figure 2.1a and 2.1b). On an element of area <math>\Delta S\,\!</math> containing <math>P\,\!</math>, with normal [[vector (geometry)|vector]] <math>\mathbf n</math>, the force distribution is equipollent to a contact force <math>\Delta \mathbf F\,\!</math> and surface moment <math>\Delta \mathbf M\,\!</math>. In particular, the contact force is given by
| |
| | |
| :<math>\Delta\mathbf F= \mathbf T^{(\mathbf n)}\,\Delta S</math>
| |
| | |
| where <math>\mathbf T^{(\mathbf n)}</math> is the ''mean surface traction''. | |
| | |
| Cauchy’s stress principle asserts<ref name=Mase/>{{rp|p.47–102}} that as <math>\Delta S\,\!</math> becomes very small and tends to zero the ratio <math>\Delta \mathbf F/\Delta S\,\!</math> becomes <math>d\mathbf F/dS\,\!</math> and the couple stress vector <math>\Delta \mathbf M\,\!</math> vanishes. In specific fields of continuum mechanics the couple stress is assumed not to vanish; however, classical branches of continuum mechanics address non-[[chemical polarity|polar]] materials which do not consider couple stresses and body moments.
| |
| | |
| The resultant vector <math>d\mathbf F/dS\,\!</math> is defined as the ''surface traction'',<ref name=Liu/> also called ''stress vector'',<ref name=Wu/> ''traction'',<ref name="Fung"/> or ''traction vector''.<ref name="Mase"/> given by <math>\mathbf{T}^{(\mathbf{n})}=T_i^{(\mathbf{n})}\mathbf{e}_i\,\!</math> at the point <math>P\,\!</math> associated with a plane with a normal vector <math>\mathbf n\,\!</math>:
| |
| | |
| :<math>T^{(\mathbf{n})}_i= \lim_{\Delta S \to 0} \frac {\Delta F_i}{\Delta S} = {dF_i \over dS}.</math>
| |
| | |
| This equation means that the stress vector depends on its location in the body and the orientation of the plane on which it is acting.
| |
| | |
| This implies that the balancing action of internal contact forces generates a ''contact force density'' or ''Cauchy traction field'' <ref name=Smith/> <math>\mathbf T(\mathbf n, \mathbf x, t)</math> that represents a distribution of internal contact forces throughout the volume of the body in a particular [[Continuum mechanics|configuration of the body]] at a given time <math>t\,\!</math>. It is not a vector field because it depends not only on the position <math>\mathbf x</math> of a particular material point, but also on the local orientation of the surface element as defined by its normal vector <math>\mathbf n</math>.<ref name=Lubliner>Lubliner</ref>
| |
| | |
| Depending on the orientation of the plane under consideration, the stress vector may not necessarily be perpendicular to that plane, ''i.e.'' parallel to <math>\mathbf n\,\!</math>, and can be resolved into two components (Figure 2.1c):
| |
| | |
| * one normal to the plane, called ''normal stress''
| |
| | |
| :<math>\mathbf{\sigma_\mathrm{n}}= \lim_{\Delta S \to 0} \frac {\Delta F_\mathrm n}{\Delta S} = \frac{dF_\mathrm n}{dS},</math>
| |
| | |
| :where <math>dF_\mathrm n\,\!</math> is the normal component of the force <math>d\mathbf F\,\!</math> to the differential area <math>dS\,\!</math>
| |
| | |
| * and the other parallel to this plane, called the ''shear stress''
| |
| | |
| :<math>\mathbf \tau= \lim_{\Delta S \to 0} \frac {\Delta F_\mathrm s}{\Delta S} = \frac{dF_\mathrm s}{dS},</math>
| |
| | |
| :where <math>dF_\mathrm s\,\!</math> is the tangential component of the force <math>d\mathbf F\,\!</math> to the differential surface area <math>dS\,\!</math>. The shear stress can be further decomposed into two mutually perpendicular vectors.
| |
| | |
| ===Cauchy’s postulate===
| |
| According to the ''Cauchy Postulate'', the stress vector <math>\mathbf{T}^{(\mathbf{n})}</math> remains unchanged for all surfaces passing through the point <math>P\,\!</math> and having the same normal vector <math>\mathbf n\,\!</math> at <math>P\,\!</math>,<ref name=Liu/><ref name=Basar/> i.e., having a common [[tangent]] at <math>P\,\!</math>. This means that the stress vector is a function of the normal vector <math>\mathbf n\,\!</math> only, and is not influenced by the curvature of the internal surfaces.
| |
| | |
| ===Cauchy’s fundamental lemma===
| |
| | |
| A consequence of Cauchy’s postulate is ''Cauchy’s Fundamental Lemma'',<ref name=Liu/><ref name=Irgens/><ref name=Atanackovic/> also called the ''Cauchy reciprocal theorem'',<ref name=Hjelmstad/>{{rp|p.103–130}} which states that the stress vectors acting on opposite sides of the same surface are equal in magnitude and opposite in direction. Cauchy’s fundamental lemma is equivalent to [[Newton's laws of motion|Newton's third law]] of motion of action and reaction, and is expressed as
| |
| | |
| :<math>- \mathbf{T}^{(\mathbf{n})}= \mathbf{T}^{(- \mathbf{n})}.\,\!</math>
| |
| | |
| ==Cauchy’s stress theorem—stress tensor==
| |
| ''The state of stress at a point'' in the body is then defined by all the stress vectors '''T'''<sup>('''n''')</sup> associated with all planes (infinite in number) that pass through that point.<ref name=Chen/> However, according to ''Cauchy’s fundamental theorem'',<ref name=Atanackovic/> also called ''Cauchy’s stress theorem'',<ref name=Irgens/> merely by knowing the stress vectors on three mutually perpendicular planes, the stress vector on any other plane passing through that point can be found through coordinate transformation equations.
| |
| | |
| Cauchy’s stress theorem states that there exists a second-order [[tensor field]] '''σ'''('''x''', t), called the Cauchy stress tensor, independent of '''n''', such that '''T''' is a linear function of '''n''':
| |
| | |
| :<math>\mathbf{T}^{(\mathbf n)}= \mathbf n \cdot\boldsymbol{\sigma}\quad \text{or} \quad T_j^{(n)}= \sigma_{ij}n_i.\,\!</math>
| |
| | |
| This equation implies that the stress vector '''T'''<sup>('''n''')</sup> at any point ''P'' in a continuum associated with a plane with normal unit vector '''n''' can be expressed as a function of the stress vectors on the planes perpendicular to the coordinate axes, ''i.e.'' in terms of the components ''σ<sub>ij</sub>'' of the stress tensor '''σ'''.
| |
| | |
| To prove this expression, consider a [[tetrahedron]] with three faces oriented in the coordinate planes, and with an infinitesimal area d''A'' oriented in an arbitrary direction specified by a normal unit vector '''n''' (Figure 2.2). The tetrahedron is formed by slicing the infinitesimal element along an arbitrary plane '''n'''. The stress vector on this plane is denoted by '''T'''<sup>('''n''')</sup>. The stress vectors acting on the faces of the tetrahedron are denoted as '''T'''<sup>('''e'''<sub>1</sub>)</sup>, '''T'''<sup>('''e'''<sub>2</sub>)</sup>, and '''T'''<sup>('''e'''<sub>3</sub>)</sup>, and are by definition the components ''σ<sub>ij</sub>'' of the stress tensor '''σ'''. This tetrahedron is sometimes called the ''Cauchy tetrahedron''. The equilibrium of forces, ''i.e.'' [[Euler's laws of motion|Euler’s first law of motion]] (Newton’s second law of motion), gives:
| |
| | |
| :<math>\mathbf{T}^{(\mathbf{n})} \, dA - \mathbf{T}^{(\mathbf{e}_1)} \, dA_1 - \mathbf{T}^{(\mathbf{e}_2)} \, dA_2 - \mathbf{T}^{(\mathbf{e}_3)} \, dA_3 = \rho \left( \frac{h}{3}dA \right) \mathbf{a},\,\!</math>
| |
| | |
| [[Image:Cauchy tetrahedron.svg|280px|right|thumb|Figure 2.2. Stress vector acting on a plane with normal unit vector '''n'''.<br /> '''A note on the sign convention:''' The tetrahedron is formed by slicing a parallelepiped along an arbitrary plane '''n'''. So, the force acting on the plane '''n''' is the reaction exerted by the other half of the parallelepiped and has an opposite sign.]]
| |
| | |
| where the right-hand-side represents the product of the mass enclosed by the tetrahedron and its acceleration: ''ρ'' is the density, '''a''' is the acceleration, and ''h'' is the height of the tetrahedron, considering the plane '''n''' as the base. The area of the faces of the tetrahedron perpendicular to the axes can be found by projecting d''A'' into each face (using the dot product):
| |
| | |
| :<math>dA_1= \left(\mathbf{n} \cdot \mathbf{e}_1 \right)dA = n_1 \; dA,\,\!</math>
| |
| :<math>dA_2= \left(\mathbf{n} \cdot \mathbf{e}_2 \right)dA = n_2 \; dA,\,\!</math> | |
| :<math>dA_3= \left(\mathbf{n} \cdot \mathbf{e}_3 \right)dA = n_3 \; dA,\,\!</math>
| |
| | |
| and then substituting into the equation to cancel out d''A'':
| |
| | |
| :<math>\mathbf{T}^{(\mathbf{n})} - \mathbf{T}^{(\mathbf{e}_1)}n_1 - \mathbf{T}^{(\mathbf{e}_2)}n_2 - \mathbf{T}^{(\mathbf{e}_3)}n_3 = \rho \left( \frac{h}{3} \right) \mathbf{a}.\,\!</math>
| |
| | |
| To consider the limiting case as the tetrahedron shrinks to a point, ''h'' must go to 0 (intuitively, the plane '''n''' is translated along '''n''' toward ''O''). As a result, the right-hand-side of the equation approaches 0, so
| |
| | |
| :<math> \mathbf{T}^{(\mathbf{n})} = \mathbf{T}^{(\mathbf{e}_1)} n_1 + \mathbf{T}^{(\mathbf{e}_2)} n_2 + \mathbf{T}^{(\mathbf{e}_3)} n_3.\,\!</math>
| |
| | |
| Assuming a material element (Figure 2.3) with planes perpendicular to the coordinate axes of a Cartesian coordinate system, the stress vectors associated with each of the element planes, ''i.e.'' '''T'''<sup>('''e'''<sub>1</sub>)</sup>, '''T'''<sup>('''e'''<sub>2</sub>)</sup>, and '''T'''<sup>('''e'''<sub>3</sub>)</sup> can be decomposed into a normal component and two shear components, ''i.e.'' components in the direction of the three coordinate axes. For the particular case of a surface with normal [[unit vector]] oriented in the direction of the ''x''<sub>1</sub>-axis, denote the normal stress by ''σ''<sub>11</sub>, and the two shear stresses as ''σ''<sub>12</sub> and ''σ''<sub>13</sub>:
| |
| | |
| :<math>\mathbf{T}^{(\mathbf{e}_1)}= T_1^{(\mathbf{e}_1)}\mathbf{e}_1 + T_2^{(\mathbf{e}_1)} \mathbf{e}_2 + T_3^{(\mathbf{e}_1)} \mathbf{e}_3 = \sigma_{11} \mathbf{e}_1 + \sigma_{12} \mathbf{e}_2 + \sigma_{13} \mathbf{e}_3,</math>
| |
| :<math>\mathbf{T}^{(\mathbf{e}_2)}= T_1^{(\mathbf{e}_2)}\mathbf{e}_1 + T_2^{(\mathbf{e}_2)} \mathbf{e}_2 + T_3^{(\mathbf{e}_2)} \mathbf{e}_3=\sigma_{21} \mathbf{e}_1 + \sigma_{22} \mathbf{e}_2 + \sigma_{23} \mathbf{e}_3,</math>
| |
| :<math>\mathbf{T}^{(\mathbf{e}_3)}= T_1^{(\mathbf{e}_3)}\mathbf{e}_1 + T_2^{(\mathbf{e}_3)} \mathbf{e}_2 + T_3^{(\mathbf{e}_3)} \mathbf{e}_3=\sigma_{31} \mathbf{e}_1 + \sigma_{32} \mathbf{e}_2 + \sigma_{33} \mathbf{e}_3,</math>
| |
| | |
| In index notation this is
| |
| | |
| :<math>\mathbf{T}^{(\mathbf{e}_i)}= T_j^{(\mathbf{e}_i)} \mathbf{e}_j = \sigma_{ij} \mathbf{e}_j.</math>
| |
| | |
| The nine components ''σ<sub>ij</sub>'' of the stress vectors are the components of a second-order Cartesian tensor called the ''Cauchy stress tensor'', which completely defines the state of stress at a point and is given by
| |
| | |
| :<math>\boldsymbol{\sigma}= \sigma_{ij} = \left[{\begin{matrix} \mathbf{T}^{(\mathbf{e}_1)} \\
| |
| \mathbf{T}^{(\mathbf{e}_2)} \\
| |
| \mathbf{T}^{(\mathbf{e}_3)} \\
| |
| \end{matrix}}\right] =
| |
| \left[{\begin{matrix}
| |
| \sigma _{11} & \sigma _{12} & \sigma _{13} \\
| |
| \sigma _{21} & \sigma _{22} & \sigma _{23} \\
| |
| \sigma _{31} & \sigma _{32} & \sigma _{33} \\
| |
| \end{matrix}}\right] \equiv \left[{\begin{matrix}
| |
| \sigma _{xx} & \sigma _{xy} & \sigma _{xz} \\
| |
| \sigma _{yx} & \sigma _{yy} & \sigma _{yz} \\
| |
| \sigma _{zx} & \sigma _{zy} & \sigma _{zz} \\
| |
| \end{matrix}}\right] \equiv \left[{\begin{matrix}
| |
| \sigma _x & \tau _{xy} & \tau _{xz} \\
| |
| \tau _{yx} & \sigma _y & \tau _{yz} \\
| |
| \tau _{zx} & \tau _{zy} & \sigma _z \\
| |
| \end{matrix}}\right],</math>
| |
| | |
| where ''σ''<sub>11</sub>, ''σ''<sub>22</sub>, and ''σ''<sub>33</sub> are normal stresses, and ''σ''<sub>12</sub>, ''σ''<sub>13</sub>, ''σ''<sub>21</sub>, ''σ''<sub>23</sub>, ''σ''<sub>31</sub>, and ''σ''<sub>32</sub> are shear stresses. The first index ''i'' indicates that the stress acts on a plane normal to the ''x<sub>i</sub>''-axis, and the second index ''j'' denotes the direction in which the stress acts. A stress component is positive if it acts in the positive direction of the coordinate axes, and if the plane where it acts has an outward normal vector pointing in the positive coordinate direction.
| |
| | |
| Thus, using the components of the stress tensor
| |
| :<math>\begin{align} \mathbf{T}^{(\mathbf{n})} &= \mathbf{T}^{(\mathbf{e}_1)}n_1 + \mathbf{T}^{(\mathbf{e}_2)}n_2 + \mathbf{T}^{(\mathbf{e}_3)}n_3 \\
| |
| & = \sum_{i=1}^3 \mathbf{T}^{(\mathbf{e}_i)}n_i \\
| |
| &= \left( \sigma_{ij}\mathbf{e}_j \right)n_i \\
| |
| &= \sigma_{ij}n_i\mathbf{e}_j
| |
| \end{align}</math>
| |
| or, equivalently,
| |
| :<math>T_j^{(\mathbf n)}= \sigma_{ij}n_i.</math>
| |
| Alternatively, in matrix form we have
| |
| :<math>\left[{\begin{matrix}
| |
| T^{(\mathbf n)}_1 & T^{(\mathbf n)}_2 & T^{(\mathbf n)}_3\end{matrix}}\right]=\left[{\begin{matrix}
| |
| n_1 & n_2 & n_3
| |
| \end{matrix}}\right]\cdot
| |
| \left[{\begin{matrix}
| |
| \sigma _{11} & \sigma _{12} & \sigma _{13} \\
| |
| \sigma _{21} & \sigma _{22} & \sigma _{23} \\
| |
| \sigma _{31} & \sigma _{32} & \sigma _{33} \\
| |
| \end{matrix}}\right].</math>
| |
| | |
| The [[Voigt notation]] representation of the Cauchy stress tensor takes advantage of the [[symmetry]] of the stress tensor to express the stress as a six-dimensional vector of the form:
| |
| :<math>\boldsymbol{\sigma} = \begin{bmatrix}\sigma_1 & \sigma_2 & \sigma_3 & \sigma_4 & \sigma_5 & \sigma_6 \end{bmatrix}^T \equiv \begin{bmatrix}\sigma_{11} & \sigma_{22} & \sigma_{33} & \sigma_{23} & \sigma_{31} & \sigma_{12} \end{bmatrix}^T.\,\!</math>
| |
| The Voigt notation is used extensively in representing stress-strain relations in solid mechanics and for computational efficiency in numerical structural mechanics software.
| |
| | |
| ===Transformation rule of the stress tensor===
| |
| It can be shown that the stress tensor is a [[Covariance and contravariance of vectors|contravariant]] second order tensor, which is a statement of how it transforms under a change of the coordinate system. From an ''x<sub>i</sub>''-system to an '' x<sub>i</sub>' ''-system, the components ''σ<sub>ij</sub>'' in the initial system are transformed into the components ''σ<sub>ij</sub>' '' in the new system according to the tensor transformation rule (Figure 2.4):
| |
| | |
| :<math>\sigma'_{ij}=a_{im}a_{jn}\sigma_{mn} \quad \text{or} \quad \boldsymbol{\sigma}' = \mathbf A \boldsymbol{\sigma} \mathbf A^{T},</math>
| |
| | |
| where '''A''' is a [[rotation matrix]] with components ''a<sub>ij</sub>''. In matrix form this is
| |
| | |
| :<math>\left[{\begin{matrix}
| |
| \sigma'_{11} & \sigma'_{12} & \sigma'_{13} \\
| |
| \sigma'_{21} & \sigma'_{22} & \sigma'_{23} \\
| |
| \sigma'_{31} & \sigma'_{32} & \sigma'_{33} \\
| |
| \end{matrix}}\right]=\left[{\begin{matrix}
| |
| a_{11} & a_{12} & a_{13} \\
| |
| a_{21} & a_{22} & a_{23} \\
| |
| a_{31} & a_{32} & a_{33} \\
| |
| \end{matrix}}\right]\left[{\begin{matrix}
| |
| \sigma_{11} & \sigma_{12} & \sigma_{13} \\
| |
| \sigma_{21} & \sigma_{22} & \sigma_{23} \\
| |
| \sigma_{31} & \sigma_{32} & \sigma_{33} \\
| |
| \end{matrix}}\right]\left[{\begin{matrix}
| |
| a_{11} & a_{21} & a_{31} \\
| |
| a_{12} & a_{22} & a_{32} \\
| |
| a_{13} & a_{23} & a_{33} \\
| |
| \end{matrix}}\right].</math>
| |
| | |
| [[Image:Stress transformation 3D.svg|600px|left|thumb|Figure 2.4 Transformation of the stress tensor]]
| |
| | |
| {{Clear}}
| |
| | |
| Expanding the [[matrix operation]], and simplifying terms using the [[Stress_(mechanics)#Equilibrium equations and symmetry of the stress tensor|symmetry of the stress tensor]], gives
| |
| :<math>\sigma_{11}' = a_{11}^2\sigma_{11}+a_{12}^2\sigma_{22}+a_{13}^2\sigma_{33}+2a_{11}a_{12}\sigma_{12}+2a_{11}a_{13}\sigma_{13}+2a_{12}a_{13}\sigma_{23},</math>
| |
| :<math>\sigma_{22}' = a_{21}^2\sigma_{11}+a_{22}^2\sigma_{22}+a_{23}^2\sigma_{33}+2a_{21}a_{22}\sigma_{12}+2a_{21}a_{23}\sigma_{13}+2a_{22}a_{23}\sigma_{23},</math>
| |
| :<math>\sigma_{33}' = a_{31}^2\sigma_{11}+a_{32}^2\sigma_{22}+a_{33}^2\sigma_{33}+2a_{31}a_{32}\sigma_{12}+2a_{31}a_{33}\sigma_{13}+2a_{32}a_{33}\sigma_{23},</math>
| |
| :<math>\begin{align}
| |
| \sigma_{12}' = &a_{11}a_{21}\sigma_{11}+a_{12}a_{22}\sigma_{22}+a_{13}a_{23}\sigma_{33}\\
| |
| &+(a_{11}a_{22}+a_{12}a_{21})\sigma_{12}+(a_{12}a_{23}+a_{13}a_{22})\sigma_{23}+(a_{11}a_{23}+a_{13}a_{21})\sigma_{13},
| |
| \end{align}</math>
| |
| :<math>\begin{align}
| |
| \sigma_{23}' = &a_{21}a_{31}\sigma_{11}+a_{22}a_{32}\sigma_{22}+a_{23}a_{33}\sigma_{33}\\
| |
| &+(a_{21}a_{32}+a_{22}a_{31})\sigma_{12}+(a_{22}a_{33}+a_{23}a_{32})\sigma_{23}+(a_{21}a_{33}+a_{23}a_{31})\sigma_{13},\end{align}</math>
| |
| :<math>\begin{align}
| |
| \sigma_{13}' = &a_{11}a_{31}\sigma_{11}+a_{12}a_{32}\sigma_{22}+a_{13}a_{33}\sigma_{33}\\
| |
| &+(a_{11}a_{32}+a_{12}a_{31})\sigma_{12}+(a_{12}a_{33}+a_{13}a_{32})\sigma_{23}+(a_{11}a_{33}+a_{13}a_{31})\sigma_{13}.\end{align}</math>
| |
| The [[Mohr circle]] for stress is a graphical representation of this transformation of stresses.
| |
| | |
| ===Normal and shear stresses===
| |
| The magnitude of the [[tangential and normal components|normal]] stress component ''σ''<sub>n</sub> of any stress vector '''T'''<sup>('''n''')</sup> acting on an arbitrary plane with normal unit vector '''n''' at a given point, in terms of the components ''σ<sub>ij</sub>'' of the stress tensor '''σ''', is the [[dot product]] of the stress vector and the normal unit vector:
| |
| :<math>\begin{align}
| |
| \sigma_\mathrm{n} &= \mathbf{T}^{(\mathbf{n})}\cdot \mathbf{n} \\
| |
| &=T^{(\mathbf n)}_i n_i \\
| |
| &=\sigma_{ij}n_i n_j.
| |
| \end{align}</math>
| |
| | |
| The magnitude of the shear stress component ''τ''<sub>n</sub>, acting in the plane spanned by the two vectors '''T'''<sup>('''n''')</sup> and '''n''', can then be found using the [[Pythagorean theorem]]:
| |
| :<math>\begin{align}
| |
| \tau_\mathrm{n} &=\sqrt{ \left( T^{(\mathbf n)} \right)^2-\sigma_\mathrm{n}^2} \\
| |
| &= \sqrt{T_i^{(\mathbf n)}T_i^{(\mathbf n)}-\sigma_\mathrm{n}^2},
| |
| \end{align}</math>
| |
| where
| |
| :<math>\left( T^{(\mathbf n)} \right)^2 = T_i^{(\mathbf n)} T_i^{(\mathbf n)} = \left( \sigma_{ij} n_j \right) \left(\sigma_{ik} n_k \right) = \sigma_{ij} \sigma_{ik} n_j n_k.</math>
| |
| | |
| ==Balance laws - Cauchy's equations of motion==
| |
| [[Image:Equilibrium equation body.svg|200px|right|thumb|Figure 4. Continuum body in equilibrium]]
| |
| | |
| ===Cauchy's first law of motion===
| |
| According to the principle of [[conservation of linear momentum]], if the continuum body is in static equilibrium it can be demonstrated that the components of the Cauchy stress tensor in every material point in the body satisfy the equilibrium equations.
| |
| :<math>
| |
| | |
| \sigma_{ji,j}+ F_i = 0
| |
| \,\!</math>
| |
| | |
| For example, for a [[hydrostatic fluid]] in equilibrium conditions, the [[stress tensor]] takes on the form:
| |
| :<math> {\sigma_{ij}} = -p{\delta_{ij}}\ </math>,
| |
| | |
| where <math>p</math> is the hydrostatic pressure, and <math>{\delta_{ij}}\ </math> is the [[kronecker delta]].
| |
| | |
| :{| class="toccolours collapsible collapsed" width="60%" style="text-align:left"
| |
| !Derivation of equilibrium equations
| |
| |-
| |
| |Consider a continuum body (see Figure 4) occupying a volume <math>V\,\!</math>, having a surface area <math>S\,\!</math>, with defined traction or surface forces <math>T_i^{(n)}\,\!</math> per unit area acting on every point of the body surface, and body forces <math>F_i\,\!</math> per unit of volume on every point within the volume <math>V\,\!</math>. Thus, if the body is in [[Momentum#Relating_to_force_–_general_equations_of_motion|equilibrium]] the resultant force acting on the volume is zero, thus:
| |
| :<math>\int_S T_i^{(n)}dS + \int_V F_i dV = 0\,\!</math>
| |
| By definition the stress vector is <math>T_i^{(n)} =\sigma_{ji}n_j\,\!</math>, then
| |
| :<math>\int_S \sigma_{ji}n_j\, dS + \int_V F_i\, dV = 0\,\!</math>
| |
| Using the [[Divergence theorem|Gauss's divergence theorem]] to convert a surface integral to a volume integral gives
| |
| :<math>\int_V \sigma_{ji,j}\, dV + \int_V F_i\, dV = 0\,\!</math>
| |
| :<math>\int_V (\sigma_{ji,j} + F_i\,) dV = 0\,\!</math>
| |
| For an arbitrary volume the integral vanishes, and we have the ''equilibrium equations''
| |
| :<math>\sigma_{ji,j} + F_i = 0\,\!</math>
| |
| |}
| |
| | |
| ===Cauchy's second law of motion===
| |
| According to the principle of [[conservation of angular momentum]], equilibrium requires that the summation of [[Torque|moments]] with respect to an arbitrary point is zero, which leads to the conclusion that the stress tensor is [[Symmetric matrix|symmetric]], thus having only six independent stress components, instead of the original nine:
| |
| | |
| :<math>\sigma_{ij}=\sigma_{ji}\,\!</math>
| |
| | |
| :{| class="toccolours collapsible collapsed" width="60%" style="text-align:left"
| |
| !Derivation of symmetry of the stress tensor
| |
| |-
| |
| | Summing moments about point ''O'' (Figure 4) the resultant moment is zero as the body is in equilibrium. Thus,
| |
| :<math>\begin{align}
| |
| M_O &=\int_S (\mathbf{r}\times\mathbf{T})dS + \int_V (\mathbf{r}\times\mathbf{F})dV=0 \\
| |
| 0 &= \int_S\varepsilon_{ijk}x_jT_k^{(n)}dS + \int_V\varepsilon_{ijk}x_jF_k dV \\
| |
| \end{align}\,\!</math>
| |
| where <math>\mathbf{r}\,\!</math> is the position vector and is expressed as
| |
| | |
| :<math>\mathbf{r}=x_j\mathbf{e}_j\,\!</math>
| |
| | |
| Knowing that <math>T_k^{(n)} =\sigma_{mk}n_m\,\!</math> and using Gauss's divergence theorem to change from a surface integral to a volume integral, we have
| |
| :<math>\begin{align}
| |
| 0 &= \int_S \varepsilon_{ijk}x_j\sigma_{mk}n_m\, dS + \int_V\varepsilon_{ijk}x_jF_k\, dV \\
| |
| &= \int_V (\varepsilon_{ijk}x_j\sigma_{mk})_{,m} dV + \int_V\varepsilon_{ijk}x_jF_k\, dV \\
| |
| &= \int_V (\varepsilon_{ijk}x_{j,m}\sigma_{mk}+\varepsilon_{ijk}x_j\sigma_{mk,m}) dV + \int_V\varepsilon_{ijk}x_jF_k\, dV \\
| |
| &= \int_V (\varepsilon_{ijk}x_{j,m}\sigma_{mk}) dV+ \int_V \varepsilon_{ijk}x_j(\sigma_{mk,m}+F_k)dV \\
| |
| \end{align}
| |
| \,\!</math>
| |
| The second integral is zero as it contains the equilibrium equations. This leaves the first integral, where <math>x_{j,m}=\delta_{jm}\,\!</math>, therefore
| |
| :<math>\int_V (\varepsilon_{ijk}\sigma_{jk}) dV=0\,\!</math>
| |
| | |
| For an arbitrary volume V, we then have
| |
| | |
| :<math>\varepsilon_{ijk}\sigma_{jk}=0\,\!</math>
| |
| | |
| which is satisfied at every point within the body. Expanding this equation we have
| |
| | |
| :<math>\sigma_{12}=\sigma_{21}\,\!</math>, <math>\sigma_{23}=\sigma_{32}\,\!</math>, and <math>\sigma_{13}=\sigma_{31}\,\!</math>
| |
| | |
| or in general
| |
| | |
| :<math>\sigma_{ij}=\sigma_{ji}\,\!</math>
| |
| | |
| This proves that the stress tensor is symmetric
| |
| |}
| |
| | |
| However, in the presence of couple-stresses, i.e. moments per unit volume, the stress tensor is non-symmetric. This also is the case when the [[Knudsen number]] is close to one, <math>K_{n}\rightarrow 1\,\!</math>, or the continuum is a non-Newtonian fluid, which can lead to rotationally non-invariant fluids, such as [[polymers]].
| |
| | |
| ==Principal stresses and stress invariants==<!-- [[Principal stress]] redirects here -->
| |
| At every point in a stressed body there are at least three planes, called ''principal planes'', with normal vectors <math>\mathbf{n}\,\!</math>, called ''principal directions'', where the corresponding stress vector is perpendicular to the plane, i.e., parallel or in the same direction as the normal vector <math>\mathbf{n}\,\!</math>, and where there are no normal shear stresses <math>\tau_\mathrm{n}\,\!</math>. The three stresses normal to these principal planes are called ''principal stresses''.
| |
| | |
| The components <math>\sigma_{ij}\,\!</math> of the stress tensor depend on the orientation of the coordinate system at the point under consideration. However, the stress tensor itself is a physical quantity and as such, it is independent of the coordinate system chosen to represent it. There are certain [[Invariant (physics)|invariants]] associated with every tensor which are also independent of the coordinate system. For example, a vector is a simple tensor of rank one. In three dimensions, it has three components. The value of these components will depend on the coordinate system chosen to represent the vector, but the [[Euclidean norm|magnitude]] of the vector is a physical quantity (a scalar) and is independent of the [[Cartesian coordinate system]] chosen to represent the vector. Similarly, every second rank tensor (such as the stress and the strain tensors) has three independent invariant quantities associated with it. One set of such invariants are the principal stresses of the stress tensor, which are just the eigenvalues of the stress tensor. Their direction vectors are the principal directions or [[eigenvectors]].
| |
| | |
| A stress vector parallel to the normal unit vector <math>\mathbf{n}\,\!</math> is given by:
| |
| | |
| :<math>\mathbf{T}^{(\mathbf{n})} = \lambda \mathbf{n}= \mathbf{\sigma}_\mathrm n \mathbf{n}\,\!</math>
| |
| | |
| where <math>\lambda\,\!</math> is a constant of proportionality, and in this particular case corresponds to the magnitudes <math>\sigma_\mathrm{n}\,\!</math> of the normal stress vectors or principal stresses.
| |
| | |
| Knowing that <math>T_i^{(n)}=\sigma_{ij}n_j\,\!</math> and <math>n_i=\delta_{ij}n_j\,\!</math>, we have
| |
| | |
| :<math>\begin{align}
| |
| T_i^{(n)} &= \lambda n_i \\
| |
| \sigma_{ij}n_j &=\lambda n_i \\
| |
| \sigma_{ij}n_j -\lambda n_i &=0 \\
| |
| \left(\sigma_{ij}- \lambda\delta_{ij} \right)n_j &=0 \\
| |
| \end{align}\,\!</math>
| |
| | |
| This is a [[System of linear equations#Homogeneous systems|homogeneous system]], i.e. equal to zero, of three linear equations where <math>n_j\,\!</math> are the unknowns. To obtain a nontrivial (non-zero) solution for <math>n_j\,\!</math>, the determinant matrix of the coefficients must be equal to zero, i.e. the system is singular. Thus,
| |
| | |
| :<math>\left|\sigma_{ij}- \lambda\delta_{ij} \right|=\begin{vmatrix}
| |
| \sigma_{11} - \lambda & \sigma_{12} & \sigma_{13} \\
| |
| \sigma_{21} & \sigma_{22} - \lambda & \sigma_{23} \\
| |
| \sigma_{31}& \sigma_{32} & \sigma_{33} - \lambda \\
| |
| \end{vmatrix}=0\,\!</math>
| |
| | |
| Expanding the determinant leads to the ''characteristic equation''
| |
| | |
| :<math>\left|\sigma_{ij}- \lambda\delta_{ij} \right| = -\lambda^3 + I_1\lambda^2 - I_2\lambda + I_3=0\,\!</math>
| |
| | |
| where
| |
| | |
| :<math>\begin{align}
| |
| I_1 &= \sigma_{11}+\sigma_{22}+\sigma_{33} \\
| |
| &= \sigma_{kk} \\
| |
| I_2 &= \begin{vmatrix}
| |
| \sigma_{22} & \sigma_{23} \\
| |
| \sigma_{32} & \sigma_{33} \\
| |
| \end{vmatrix}
| |
| + \begin{vmatrix}
| |
| \sigma_{11} & \sigma_{13} \\
| |
| \sigma_{31} & \sigma_{33} \\
| |
| \end{vmatrix}
| |
| +
| |
| \begin{vmatrix}
| |
| \sigma_{11} & \sigma_{12} \\
| |
| \sigma_{21} & \sigma_{22} \\
| |
| \end{vmatrix} \\
| |
| &= \sigma_{11}\sigma_{22}+\sigma_{22}\sigma_{33}+\sigma_{11}\sigma_{33}-\sigma_{12}^2-\sigma_{23}^2-\sigma_{31}^2 \\
| |
| &= \frac{1}{2}\left(\sigma_{ii}\sigma_{jj}-\sigma_{ij}\sigma_{ji}\right) \\
| |
| I_3 &= \det(\sigma_{ij}) \\
| |
| &= \sigma_{11}\sigma_{22}\sigma_{33}+2\sigma_{12}\sigma_{23}\sigma_{31}-\sigma_{12}^2\sigma_{33}-\sigma_{23}^2\sigma_{11}-\sigma_{31}^2\sigma_{22} \\
| |
| \end{align}
| |
| \,\!</math>
| |
| | |
| The characteristic equation has three real roots <math>\lambda_i\,\!</math>, i.e. not imaginary due to the symmetry of the stress tensor. The <math> \sigma_1 = \max \left( \lambda_1,\lambda_2,\lambda_3 \right)\,\!</math>, <math>\sigma_3 = \min \left( \lambda_1,\lambda_2,\lambda_3 \right)\,\!</math> and <math>\sigma_2=I_1-\sigma_1-\sigma_3\,\!</math>, are the principal stresses, functions of the eigenvalues <math>\lambda_i\,\!</math>. The eigenvalues are the roots of the [[Cayley–Hamilton theorem]]. The principal stresses are unique for a given stress tensor. Therefore, from the characteristic equation, the coefficients <math>I_1\,\!</math>, <math>I_2\,\!</math> and <math>I_3\,\!</math>, called the first, second, and third ''stress invariants'', respectively, have always the same value regardless of the coordinate system's orientation.
| |
| | |
| For each eigenvalue, there is a non-trivial solution for <math>n_j\,\!</math> in the equation <math>\left(\sigma_{ij}- \lambda\delta_{ij} \right)n_j =0\,\!</math>. These solutions are the principal directions or [[eigenvector]]s defining the plane where the principal stresses act. The principal stresses and principal directions characterize the stress at a point and are independent of the orientation.
| |
| | |
| A coordinate system with axes oriented to the principal directions implies that the normal stresses are the principal stresses and the stress tensor is represented by a diagonal matrix:
| |
| | |
| :<math>\sigma_{ij}=
| |
| \begin{bmatrix}
| |
| \sigma_1 & 0 & 0\\
| |
| 0 & \sigma_2 & 0\\
| |
| 0 & 0 & \sigma_3
| |
| \end{bmatrix}
| |
| \,\!</math>
| |
| | |
| The principal stresses can be combined to form the stress invariants, <math>I_1\,\!</math>, <math>I_2\,\!</math>, and <math>I_3\,\!</math>. The first and third invariant are the trace and determinant respectively, of the stress tensor. Thus,
| |
| | |
| :<math>\begin{align}
| |
| I_1 &= \sigma_{1}+\sigma_{2}+\sigma_{3} \\
| |
| I_2 &= \sigma_{1}\sigma_{2}+\sigma_{2}\sigma_{3}+\sigma_{3}\sigma_{1} \\
| |
| I_3 &= \sigma_{1}\sigma_{2}\sigma_{3} \\
| |
| \end{align}\,\!</math>
| |
| | |
| Because of its simplicity, the principal coordinate system is often useful when considering the state of the elastic medium at a particular point. Principal stresses are often expressed in the following equation for evaluating stresses in the x and y directions or axial and bending stresses on a part.<ref name=Hamrock/>{{rp|p.58–59}} The principal normal stresses can then be used to calculate the [[von Mises stress]] and ultimately the safety factor and margin of safety.
| |
| | |
| :<math>\sigma_{1},\sigma_{2}= \frac{\sigma_{x} + \sigma_{y}}{2} \pm \sqrt{\left (\frac{\sigma_{x} - \sigma_{y}}{2}\right)^2 + \tau_{xy}^2}\,\!</math>
| |
| | |
| Using just the part of the equation under the [[square root]] is equal to the maximum and minimum shear stress for plus and minus. This is shown as:
| |
| | |
| :<math>\tau_{max},\tau_{min}= \pm \sqrt{\left (\frac{\sigma_{x} - \sigma_{y}}{2}\right)^2 + \tau_{xy}^2}\,\!</math>
| |
| | |
| ==Maximum and minimum shear stresses==
| |
| The maximum shear stress or maximum principal shear stress is equal to one-half the difference between the largest and smallest principal stresses, and acts on the plane that bisects the angle between the directions of the largest and smallest principal stresses, i.e. the plane of the maximum shear stress is oriented <math>45^\circ</math> from the principal stress planes. The maximum shear stress is expressed as
| |
| | |
| :<math>\tau_\max=\frac{1}{2}\left|\sigma_\max-\sigma_\min\right|\,\!</math>
| |
| | |
| Assuming <math>\sigma_1\ge\sigma_2\ge\sigma_3\,\!</math> then
| |
| | |
| :<math>\tau_\max=\frac{1}{2}\left|\sigma_1-\sigma_3\right|\,\!</math>
| |
| | |
| When the stress tensor is non zero the normal stress component acting on the plane for the maximum shear stress is non-zero and it is equal to
| |
| | |
| <math>\sigma_\mathrm{n}=\frac{1}{2}\left(\sigma_1+\sigma_3\right)\,\!</math>
| |
| | |
| :{| class="toccolours collapsible collapsed" width="60%" style="text-align:left"
| |
| !Derivation of the maximum and minimum shear stresses<ref name=Wu/>{{rp|p.45–78}}<ref name=Atanackovic/>{{rp|p.1–46}}<ref name=Chen/><ref name=Chatterjee/>{{rp|p.111–157}}<ref name=Jaeger/>{{rp|p.9–41}}<ref name=Ameen/>{{rp|p.33–66}}<ref name=Prager/>{{rp|p.43–61}}
| |
| |-
| |
| |The normal stress can be written in terms of principal stresses <math>(\sigma_1\ge\sigma_2\ge\sigma_3)\,\!</math> as
| |
| | |
| :<math>\begin{align}
| |
| \sigma_\mathrm{n} &= \sigma_{ij}n_in_j \\
| |
| &=\sigma_1n_1^2 + \sigma_2n_2^2 + \sigma_3n_3^2\\
| |
| \end{align}
| |
| \,\!</math>
| |
| | |
| Knowing that <math>\left( T^{(n)} \right)^2=\sigma_{ij}\sigma_{ik}n_jn_k</math>, the shear stress in terms of principal stresses components is expressed as
| |
| | |
| :<math>\begin{align}
| |
| \tau_\mathrm{n}^2 &= \left( T^{(n)} \right)^2-\sigma_\mathrm{n}^2 \\
| |
| &=\sigma_1^2n_1^2+\sigma_2^2n_2^2+\sigma_3^2n_3^2-\left(\sigma_1n_1^2+\sigma_2n_2^2+\sigma_3n_3^2\right)^2 \\
| |
| &=(\sigma_1^2-\sigma_2^2)n_1^2+(\sigma_2^2-\sigma_3^2)n_2^2+\sigma_3^2-\left[\left(\sigma_1-\sigma_3\right)n_1^2+\left(\sigma_2-\sigma_2\right)n_2^2+\sigma_3\right]^2 \\
| |
| &= (\sigma_1-\sigma_2)^2n_1^2n_2^2+(\sigma_2-\sigma_3)^2n_2^2n_3^2+(\sigma_1-\sigma_3)^2n_1^2n_3^2 \\
| |
| \end{align}
| |
| \,\!</math>
| |
| | |
| The maximum shear stress at a point in a continuum body is determined by maximizing <math>\tau_\mathrm{n}^2\,\!</math> subject to the condition that
| |
| | |
| :<math> n_in_i=n_1^2+n_2^2+n_3^2=1\,\!</math>
| |
| | |
| This is a constrained maximization problem, which can be solved using the [[Lagrangian multiplier]] technique to convert the problem into an unconstrained optimization problem. Thus, the stationary values (maximum and minimum values)of <math>\tau_\mathrm{n}^2\,\!</math> occur where the gradient of <math>\tau_\mathrm{n}^2\,\!</math> is parallel to the gradient of <math>F\,\!</math>.
| |
| | |
| The Lagrangian function for this problem can be written as
| |
| | |
| :<math>\begin{align}
| |
| F\left(n_1,n_2,n_3,\lambda\right) &= \tau^2 + \lambda \left(g\left(n_1,n_2,n_3\right) - 1 \right) \\
| |
| &= \sigma_1^2n_1^2+\sigma_2^2n_2^2+\sigma_3^2n_3^2-\left(\sigma_1n_1^2+\sigma_2n_2^2+\sigma_3n_3^2\right)^2+\lambda\left(n_1^2+n_2^2+n_3^2-1\right)\\
| |
| \end{align}
| |
| \,\!</math>
| |
| | |
| where <math>\lambda\,\!</math> is the Lagrangian multiplier (which is different from the <math>\lambda\,\!</math> use to denote eigenvalues).
| |
| | |
| The extreme values of these functions are
| |
| | |
| :<math> \frac{\partial F}{\partial n_1}=0 \qquad \frac{\partial F}{\partial n_2}=0 \qquad \frac{\partial F}{\partial n_3}=0 \,\!</math>
| |
| | |
| thence
| |
| | |
| :<math>\frac{\partial F}{\partial n_1} = n_1\sigma_1^2-2n_1\sigma_1\left(\sigma_1 n_1^2+\sigma_2 n_2^2+\sigma_3 n_3^2\right)+\lambda n_1 = 0\,\!</math>
| |
| :<math>\frac{\partial F}{\partial n_2} = n_2\sigma_2^2-2n_2\sigma_2\left(\sigma_1 n_1^2+\sigma_2 n_2^2+\sigma_3 n_3^2\right)+\lambda n_2 = 0\,\!</math>
| |
| :<math>\frac{\partial F}{\partial n_3} = n_3\sigma_3^2-2n_3\sigma_3\left(\sigma_1 n_1^2+\sigma_2 n_2^2+\sigma_3 n_3^2\right)+\lambda n_3 = 0\,\!</math>
| |
| | |
| These three equations together with the condition <math>n_in_i=1\,\!</math> may be solved for <math>\lambda, n_1, n_2,\,\!</math> and <math>n_3\,\!</math>
| |
| | |
| By multiplying the first three equations by <math>n_1,\,n_2,\,\!</math> and <math>n_3\,\!</math>, respectively, and knowing that <math>\sigma_\mathrm{n} = \sigma_{ij}n_in_j=\sigma_1n_1^2 + \sigma_2n_2^2 +\sigma_3n_3^2\,\!</math> we obtain
| |
| | |
| :<math>n_1^2\sigma_1^2-2\sigma_1n_1^2\sigma_\mathrm{n}+n_1^2\lambda=0\,\!</math>
| |
| :<math>n_2^2\sigma_2^2-2\sigma_2n_2^2\sigma_\mathrm{n}+n_2^2\lambda=0\,\!</math>
| |
| :<math>n_3^2\sigma_3^2-2\sigma_1n_3^2\sigma_\mathrm{n}+n_3^2\lambda=0\,\!</math>
| |
| | |
| Adding these three equations we get
| |
| | |
| :<math>\begin{align}
| |
| \left[n_1^2\sigma_1^2+n_2^2\sigma_2^2+n_3^2\sigma_3^2\right]-2\left(\sigma_1n_1^2+\sigma_2n_2^2+\sigma_3n_3^2\right)\sigma_\mathrm{n}+\lambda\left(n_1^2+n_2^2+n_3^2\right)&=0 \\
| |
| \left[\tau_\mathrm{n}^2+\left(\sigma_1n_1^2+\sigma_2n_2^2+\sigma_3n_3^2\right)^2\right]-2\sigma_\mathrm{n}^2+\lambda&=0 \\
| |
| \left[\tau_\mathrm{n}^2+\sigma_\mathrm{n}^2\right]-2\sigma_\mathrm{n}^2+\lambda &=0 \\
| |
| \lambda &= \sigma_\mathrm{n}^2-\tau_\mathrm{n}^2
| |
| \end{align}\,\!</math>
| |
| | |
| this result can be substituted into each of the first three equations to obtain
| |
| | |
| :<math>\begin{align}
| |
| \frac{\partial F}{\partial n_1} = n_1\sigma_1^2-2n_1\sigma_1\left(\sigma_1 n_1^2+\sigma_2 n_2^2+\sigma_3 n_3^2\right)+\left(\sigma_\mathrm{n}^2-\tau_\mathrm{n}^2\right) n_1 &= 0 \\
| |
| n_1\sigma_1^2-2n_1\sigma_1\sigma_\mathrm{n}+\left(\sigma_\mathrm{n}^2-\tau_\mathrm{n}^2\right) n_1 &= 0 \\
| |
| \left(\sigma_1^2-2\sigma_1\sigma_\mathrm{n}+\sigma_\mathrm{n}^2-\tau_\mathrm{n}^2\right) n_1 &= 0 \\
| |
| \end{align}\,\!</math>
| |
| | |
| Doing the same for the other two equations we have
| |
| :<math>\frac{\partial F}{\partial n_2}=\left(\sigma_2^2-2\sigma_2\sigma_\mathrm{n}+\sigma_\mathrm{n}^2-\tau_\mathrm{n}^2\right) n_2 = 0\,\!</math>
| |
| | |
| :<math>\frac{\partial F}{\partial n_3}= \left(\sigma_3^2-2\sigma_3\sigma_\mathrm{n}+\sigma_\mathrm{n}^2-\tau_\mathrm{n}^2\right) n_3= 0\,\!</math>
| |
| | |
| A first approach to solve these last three equations is to consider the trivial solution <math>n_i=0\,\!</math>. However this options does not fulfill the constrain <math>n_in_i=1\,\!</math>.
| |
| | |
| Considering the solution where <math>n_1=n_2=0\,\!</math> and <math>n_3 \neq 0\,\!</math>, it is determine from the condition <math>n_in_i=1\,\!</math> that <math>n_3=\pm1\,\!</math>, then from the original equation for <math>\tau_\mathrm{n}^2\,\!</math> it is seen that <math>\tau_\mathrm{n}=0\,\!</math>.
| |
| The other two possible values for <math>\tau_\mathrm{n}\,\!</math> can be obtained similarly by assuming
| |
| | |
| :<math>n_1=n_3=0\,\!</math> and <math>n_2 \neq 0\,\!</math>
| |
| :<math>n_2=n_3=0\,\!</math> and <math>n_1 \neq 0\,\!</math>
| |
| | |
| Thus, one set of solutions for these four equations is:
| |
| | |
| :<math>\begin{align}
| |
| n_1&=0,\,\,n_2&=0,\,\,n_3&=\pm1,\,\,\tau_\mathrm{n}&=0 \\
| |
| n_1&=0,\,\,n_2&=\pm1,\,\,n_3&=0,\,\,\tau_\mathrm{n}&=0 \\
| |
| n_1&=\pm1,\,\,n_2&=0,\,\,n_3&=0,\,\,\tau_\mathrm{n}&=0
| |
| \end{align}\,\!</math>
| |
| | |
| These correspond to minimum values for <math>\tau_\mathrm{n}\,\!</math> and verifies that there are no shear stresses on planes normal to the principal directions of stress, as shown previously.
| |
| | |
| A second set of solutions is obtained by assuming <math>n_1=0,\, n_2\neq0\,\!</math> and <math>n_3 \neq 0\,\!</math>. Thus we have
| |
| | |
| :<math>\frac{\partial F}{\partial n_2}= \sigma_2^2-2\sigma_2\sigma_\mathrm{n}+\sigma_\mathrm{n}^2-\tau_\mathrm{n}^2 = 0 \,\!</math>
| |
| | |
| :<math>\frac{\partial F}{\partial n_3}=\sigma_3^2-2\sigma_3\sigma_\mathrm{n}+\sigma_\mathrm{n}^2-\tau_\mathrm{n}^2 = 0 \,\!</math>
| |
| | |
| To find the values for <math>n_2\,\!</math> and <math>n_3\,\!</math> we first add these two equations
| |
| | |
| :<math>\begin{align}
| |
| \sigma_2^2-\sigma_3^2-2\sigma_2\sigma_n+2\sigma_2\sigma_n&=0 \\
| |
| \sigma_2^2-\sigma_3^2-2\sigma_n\left(\sigma_2-\sigma_3\right)&=0 \\
| |
| \sigma_2+\sigma_3&=2\sigma_n
| |
| \end{align}\,\!</math>
| |
| | |
| Knowing that for <math>n_1=0\,\!</math>
| |
| | |
| :<math>\sigma_\mathrm{n} = \sigma_1n_1^2+\sigma_2n_2^2 + \sigma_3n_3^2=\sigma_2n_2^2 + \sigma_3n_3^2\,\!</math>
| |
| | |
| and
| |
| | |
| :<math>n_1^2+n_2^2+n_3^2=n_2^2+n_3^2=1 \,\!</math>
| |
| | |
| we have
| |
| | |
| :<math>\begin{align}
| |
| \sigma_2+\sigma_3&=2\sigma_n \\
| |
| \sigma_2+\sigma_3&=2\left(\sigma_2n_2^2 + \sigma_3n_3^2\right) \\
| |
| \sigma_2+\sigma_3&=2\left(\sigma_2n_2^2 + \sigma_3\left(1-n_2^2\right)\right)&=0
| |
| \end{align}\,\!</math>
| |
| | |
| and solving for <math>n_2\,\!</math> we have
| |
| | |
| :<math>n_2=\pm\frac{1}{\sqrt 2}\,\!</math>
| |
| | |
| Then solving for <math>n_3\,\!</math> we have
| |
| :<math>n_3=\sqrt{1-n_2^2}=\pm\frac{1}{\sqrt 2}\,\!</math>
| |
| | |
| and
| |
| | |
| :<math>\begin{align}
| |
| \tau_\mathrm{n}^2&=(\sigma_2-\sigma_3)^2n_2^2n_3^2 \\
| |
| \tau_\mathrm{n}&=\frac{\sigma_2-\sigma_3}{2}\end{align}\,\!</math>
| |
| | |
| The other two possible values for <math>\tau_\mathrm{n}\,\!</math> can be obtained similarly by assuming
| |
| | |
| :<math>n_2=0,\, n_1\neq0\,\!</math> and <math>n_3 \neq 0\,\!</math>
| |
| :<math>n_3=0,\, n_1\neq0\,\!</math> and <math>n_2 \neq 0\,\!</math>
| |
| | |
| Therefore the second set of solutions for <math> \frac{\partial F}{\partial n_1}=0\,\!</math>, representing a maximum for <math>\tau_\mathrm{n}\,\!</math> is
| |
| | |
| :<math>n_1=0,\,\,n_2=\pm\frac{1}{\sqrt 2},\,\,n_3=\pm\frac{1}{\sqrt 2},\,\,\tau_\mathrm{n}=\pm\frac{\sigma_2-\sigma_3}{2}\,\!</math>
| |
| | |
| :<math>n_1=\pm\frac{1}{\sqrt 2},\,\,n_2=0,\,\,n_3=\pm\frac{1}{\sqrt 2},\,\,\tau_\mathrm{n}=\pm\frac{\sigma_1-\sigma_3}{2}\,\!</math>
| |
| | |
| :<math>n_1=\pm\frac{1}{\sqrt 2},\,\,n_2=\pm\frac{1}{\sqrt 2},\,\,n_3=0,\,\,\tau_\mathrm{n}=\pm\frac{\sigma_2-\sigma_3}{2}\,\!</math>
| |
| | |
| Therefore, assuming <math>\sigma_1\ge\sigma_2\ge\sigma_3\,\!</math>, the maximum shear stress is expressed by
| |
| | |
| :<math>\tau_\mathrm{max}=\frac{1}{2}\left|\sigma_1-\sigma_3\right|=\frac{1}{2}\left|\sigma_\mathrm{max}-\sigma_\mathrm{min}\right|\,\!</math>
| |
| | |
| and it can be stated as being equal to one-half the difference between the largest and smallest principal stresses, acting on the plane that bisects the angle between the directions of the largest and smallest principal stresses.
| |
| |}
| |
| | |
| ==Stress deviator tensor==
| |
| The stress tensor <math>\sigma_{ij}\,\!</math> can be expressed as the sum of two other stress tensors:
| |
| # a ''mean [[hydrostatic stress]] tensor'' or ''volumetric stress tensor'' or ''mean normal stress tensor'', <math>\pi\delta_{ij}\,\!</math>, which tends to change the volume of the stressed body; and
| |
| # a deviatoric component called the ''stress deviator tensor'', <math>s_{ij}\,\!</math>, which tends to distort it.
| |
| So:
| |
| | |
| :<math>\sigma_{ij}= s_{ij} + \pi\delta_{ij},\,</math>
| |
| | |
| where <math>\pi\,\!</math> is the mean stress given by
| |
| | |
| :<math>\pi=\frac{\sigma_{kk}}{3}=\frac{\sigma_{11}+\sigma_{22}+\sigma_{33}}{3}=\tfrac{1}{3}I_1.\,</math>
| |
| | |
| [[Pressure]] (<math>p</math>) is generally defined as negative one-third the [[Trace (linear algebra)|trace]] of the stress tensor minus any stress the divergence of the velocity contributes with, i.e.
| |
| | |
| :<math>p = \nabla\cdot\vec{u} -\pi = \lambda\,\frac{\partial u_k}{\partial x_k} -\pi = \sum_k\lambda\,\frac{\partial u_k}{\partial x_k} -\pi,</math>
| |
| | |
| where <math>\lambda</math> is a proportionality constant, <math>\nabla</math> is the [[divergence operator]], <math>x_k</math> is the ''k'':th [[Cartesian coordinate system|Cartesian coordinate]], <math>\vec{u}</math> is the [[velocity]] and <math>u_k</math> is the ''k'':th Cartesian component of <math>\vec{u}</math>.
| |
| | |
| The deviatoric stress tensor can be obtained by subtracting the hydrostatic stress tensor from the Cauchy stress tensor:
| |
| | |
| :<math>\begin{align}
| |
| \ s_{ij} &= \sigma_{ij} - \frac{\sigma_{kk}}{3}\delta_{ij},\,\\
| |
| \left[{\begin{matrix}
| |
| s_{11} & s_{12} & s_{13} \\
| |
| s_{21} & s_{22} & s_{23} \\
| |
| s_{31} & s_{32} & s_{33}
| |
| \end{matrix}}\right]
| |
| &=\left[{\begin{matrix}
| |
| \sigma_{11} & \sigma_{12} & \sigma_{13} \\
| |
| \sigma_{21} & \sigma_{22} & \sigma_{23} \\
| |
| \sigma_{31} & \sigma_{32} & \sigma_{33}
| |
| \end{matrix}}\right]-\left[{\begin{matrix}
| |
| \pi & 0 & 0 \\
| |
| 0 & \pi & 0 \\
| |
| 0 & 0 & \pi
| |
| \end{matrix}}\right] \\
| |
| &=\left[{\begin{matrix}
| |
| \sigma_{11}-\pi & \sigma_{12} & \sigma_{13} \\
| |
| \sigma_{21} & \sigma_{22}-\pi & \sigma_{23} \\
| |
| \sigma_{31} & \sigma_{32} & \sigma_{33}-\pi
| |
| \end{matrix}}\right].
| |
| \end{align}</math>
| |
| | |
| ===Invariants of the stress deviator tensor===
| |
| As it is a second order tensor, the stress deviator tensor also has a set of [[Invariants of tensors|invariants]], which can be obtained using the same procedure used to calculate the invariants of the stress tensor. It can be shown that the principal directions of the stress deviator tensor <math>s_{ij}\,\!</math> are the same as the principal directions of the stress tensor <math>\sigma_{ij}\,\!</math>. Thus, the characteristic equation is
| |
| | |
| :<math>\left| s_{ij}- \lambda\delta_{ij} \right| = \lambda^3-J_1\lambda^2-J_2\lambda-J_3=0,\,</math>
| |
| | |
| where <math>J_1\,\!</math>, <math>J_2\,\!</math> and <math>J_3\,\!</math> are the first, second, and third ''deviatoric stress invariants'', respectively. Their values are the same (invariant) regardless of the orientation of the coordinate system chosen. These deviatoric stress invariants can be expressed as a function of the components of <math>s_{ij}\,\!</math> or its principal values <math>s_1\,\!</math>, <math>s_2\,\!</math>, and <math>s_3\,\!</math>, or alternatively, as a function of <math>\sigma_{ij}\,\!</math> or its principal values <math>\sigma_1\,\!</math>, <math>\sigma_2\,\!</math>, and <math>\sigma_3\,\!</math> . Thus,
| |
| | |
| :<math>\begin{align}
| |
| J_1 &= s_{kk}=0,\, \\
| |
| J_2 &= \textstyle{\frac{1}{2}}s_{ij}s_{ji} \\
| |
| &= \tfrac{1}{2}(s_1^2 + s_2^2 + s_3^2) \\
| |
| &= \tfrac{1}{6}\left[(\sigma_{11} - \sigma_{22})^2 + (\sigma_{22} - \sigma_{33})^2 + (\sigma_{33} - \sigma_{11})^2 \right ] + \sigma_{12}^2 + \sigma_{23}^2 + \sigma_{31}^2 \\
| |
| &= \tfrac{1}{6}\left[(\sigma_1 - \sigma_2)^2 + (\sigma_2 - \sigma_3)^2 + (\sigma_3 - \sigma_1)^2 \right ] \\
| |
| &= \tfrac{1}{3}I_1^2-I_2,\,\\
| |
| J_3 &= \det(s_{ij}) \\
| |
| &= \tfrac{1}{3}s_{ij}s_{jk}s_{ki} \\
| |
| &= s_1s_2s_3 \\
| |
| &= \tfrac{2}{27}I_1^3 - \tfrac{1}{3}I_1 I_2 + I_3.\,
| |
| \end{align}
| |
| </math>
| |
| | |
| Because <math>s_{kk}=0\,\!</math>, the stress deviator tensor is in a state of pure shear.
| |
| | |
| A quantity called the equivalent stress or [[von Mises stress]] is commonly used in solid mechanics. The equivalent stress is defined as
| |
| | |
| :<math>\sigma_\mathrm e = \sqrt{3~J_2} = \sqrt{\tfrac{1}{2}~\left[(\sigma_1-\sigma_2)^2 + (\sigma_2-\sigma_3)^2 + (\sigma_3-\sigma_1)^2 \right]}
| |
| \,.</math>
| |
| | |
| ==Octahedral stresses==
| |
| [[Image:Octahedral stress planes.svg|300px|right|thumb|Figure 6. Octahedral stress planes]]
| |
| Considering the principal directions as the coordinate axes, a plane whose normal vector makes equal angles with each of the principal axes (i.e. having direction cosines equal to <math>|1/\sqrt{3}|\,\!</math>) is called an ''octahedral plane''. There are a total of eight octahedral planes (Figure 6). The normal and shear components of the stress tensor on these planes are called ''octahedral normal stress'' <math>\sigma_\mathrm{oct}\,\!</math> and ''octahedral shear stress'' <math>\tau_\mathrm{oct}\,\!</math>, respectively.
| |
| | |
| Knowing that the stress tensor of point O (Figure 6) in the principal axes is
| |
| | |
| :<math>\sigma_{ij}=
| |
| \begin{bmatrix}
| |
| \sigma_1 & 0 & 0\\
| |
| 0 & \sigma_2 & 0\\
| |
| 0 & 0 & \sigma_3
| |
| \end{bmatrix}
| |
| \,\!</math>
| |
| | |
| the stress vector on an octahedral plane is then given by:
| |
| | |
| :<math>\begin{align}
| |
| \mathbf{T}_\mathrm{oct}^{(\mathbf{n})}&= \sigma_{ij}n_i\mathbf{e}_j \\
| |
| &=\sigma_1n_1\mathbf{e}_1+\sigma_2n_2\mathbf{e}_2+\sigma_3n_3\mathbf{e}_3\\
| |
| &=\tfrac{1}{\sqrt{3}}(\sigma_1\mathbf{e}_1+\sigma_2\mathbf{e}_2+\sigma_3\mathbf{e}_3)
| |
| \end{align}
| |
| \,\!</math>
| |
| | |
| The normal component of the stress vector at point O associated with the octahedral plane is
| |
| | |
| :<math>\begin{align}
| |
| \sigma_\mathrm{oct} &= T^{(n)}_in_i \\
| |
| &=\sigma_{ij}n_in_j \\
| |
| &=\sigma_1n_1n_1+\sigma_2n_2n_2+\sigma_3n_3n_3 \\
| |
| &=\tfrac{1}{3}(\sigma_1+\sigma_2+\sigma_3)=\tfrac{1}{3}I_1
| |
| \end{align}
| |
| \,\!</math>
| |
| | |
| which is the mean normal stress or hydrostatic stress. This value is the same in all eight octahedral planes.
| |
| The shear stress on the octahedral plane is then
| |
| | |
| :<math>\begin{align}
| |
| \tau_\mathrm{oct} &=\sqrt{T_i^{(n)}T_i^{(n)}-\sigma_\mathrm{n}^2} \\
| |
| &=\left[\tfrac{1}{3}(\sigma_1^2+\sigma_2^2+\sigma_3^2)-\tfrac{1}{9}(\sigma_1+\sigma_2+\sigma_3)^2\right]^{1/2} \\
| |
| &=\tfrac{1}{3}\left[(\sigma_1-\sigma_2)^2+(\sigma_2-\sigma_3)^2+(\sigma_3-\sigma_1)^2\right]^{1/2} = \tfrac{1}{3}\sqrt{2I_1^2-6I_2} = \sqrt{\tfrac{2}{3}J_2}
| |
| \end{align}
| |
| \,\!</math>
| |
| | |
| == References ==
| |
| <references>
| |
| | |
| <ref name=Hjelmstad>
| |
| Keith D. Hjelmstad (2005), [http://books.google.ca/books?id=LVTYjmcdvPwC&pg=PA103 "Fundamentals of Structural Mechanics"] (2nd edition). Prentice-Hall. ISBN 0-387-23330-X
| |
| </ref>
| |
| | |
| <ref name=Atanackovic>
| |
| Teodor M. Atanackovic and Ardéshir Guran (2000), [http://books.google.ca/books?id=uQrBWdcGmjUC&pg=PA1 "Theory of Elasticity for Scientists and Engineers"]. Springer. ISBN 0-8176-4072-X
| |
| </ref>
| |
| | |
| <ref name=Basar>Basar</ref>
| |
| | |
| <ref name=Mase>
| |
| G. Thomas Mase and George E. Mase (1999), [http://books.google.ca/books?id=uI1ll0A8B_UC&pg=PA47 "Continuum Mechanics for Engineers"] (2nd edition). CRC Press. ISBN 0-8493-1855-6
| |
| </ref>
| |
| | |
| <ref name=Truesdell>{{harvnb|Truesdell|Toupin|1960}}
| |
| </ref>
| |
| | |
| <ref name=Chadwick>
| |
| Peter Chadwick (1999), [http://books.google.ca/books?id=QSXIHQsus6UC&pg=PA95 "Continuum Mechanics: Concise Theory and Problems"]. Dover Publications, series "Books on Physics". ISBN 0-486-40180-4. pages
| |
| </ref>
| |
| | |
| <ref name=Fung>
| |
| Yuan-cheng Fung and Pin Tong (2001) [http://books.google.ca/books?id=hmyiIiiv4FUC&pg=PA66 "Classical and Computational Solid Mechanics"]. World Scientific. ISBN 981-02-4124-0
| |
| </ref>
| |
| | |
| <ref name=Liu>
| |
| I-Shih Liu (2002), [http://books.google.com/books?id=-gWqM4uMV6wC&pg=PA43 "Continuum Mechanics"]. Springer ISBN 3-540-43019-9
| |
| </ref>
| |
| | |
| <ref name=Irgens>
| |
| Fridtjov Irgens (2008), [http://books.google.com/books?id=q5dB7Gf4bIoC&pg=PA46 "Continuum Mechanics"]. Springer. ISBN 3-540-74297-2
| |
| </ref>
| |
| | |
| <ref name=Chen>
| |
| Wai-Fah Chen and Da-Jian Han (2007), [http://books.google.com/books?id=E8jptvNgADYC&pg=PA46 "Plasticity for Structural Engineers"]. J. Ross Publishing ISBN 1-932159-75-4
| |
| </ref>
| |
| | |
| <ref name=Hamrock>
| |
| Bernard Hamrock (2005), [http://books.google.com/books?id=jT1XPwAACAAJ "Fundamentals of Machine Elements"]. McGraw–Hill. ISBN 0-07-297682-9
| |
| </ref>
| |
| | |
| <ref name=Wu>
| |
| Han-Chin Wu (2005), [http://books.google.com/books?id=OS4mICsHG3sC&pg=PA45 "Continuum Mechanics and Plasticity"]. CRC Press. ISBN 1-58488-363-4
| |
| </ref>
| |
| | |
| <ref name=Chatterjee>
| |
| Rabindranath Chatterjee (1999), [http://books.google.com/books?id=v2F84PwH0BkC&pg=PA111 "Mathematical Theory of Continuum Mechanics"]. Alpha Science. ISBN 81-7319-244-8
| |
| </ref>
| |
| | |
| <ref name=Jaeger>
| |
| John Conrad Jaeger, N. G. W. Cook, and R. W. Zimmerman (2007), [http://books.google.com/books?id=FqADDkunVNAC&pg=PA10 "Fundamentals of Rock Mechanics"] (4th edition). Wiley-Blackwell. ISBN 0-632-05759-9
| |
| </ref>
| |
| | |
| <ref name=Ameen>
| |
| Mohammed Ameen (2005), [http://books.google.ca/books?id=Gl9cFyLrdrcC&pg=PA33 "Computational Elasticity: Theory of Elasticity and Finite and Boundary Element Methods"] (book). Alpha Science, ISBN 1-84265-201-X
| |
| </ref>
| |
| | |
| <ref name=Prager>
| |
| William Prager (2004), [http://books.google.ca/books?id=Feer6-hn9zsC&pg=PA43 "Introduction to Mechanics of Continua"]. Dover Publications. ISBN 0-486-43809-0
| |
| </ref>
| |
| | |
| <ref name=Atanackovic>
| |
| Teodor M. Atanackovic and Ardéshir Guran (2000), [http://books.google.ca/books?id=uQrBWdcGmjUC&pg=PA1 "Theory of Elasticity for Scientists and Engineers"]. Springer. ISBN 0-8176-4072-X
| |
| </ref>
| |
| | |
| <ref name=Chen>
| |
| Wai-Fah Chen and Da-Jian Han (2007), [http://books.google.com/books?id=E8jptvNgADYC&pg=PA46 "Plasticity for Structural Engineers"]. J. Ross Publishing ISBN 1-932159-75-4
| |
| </ref>
| |
| | |
| </references>
| |
| | |
| {{tensors}}
| |
| | |
| [[Category:Tensors]]
| |
| [[Category:Solid mechanics]]
| |
| [[Category:Continuum mechanics]]
| |