Otsu's method

Simulator seating at the St. Louis Zoo

A motion simulator or motion platform is a mechanism that encapsulates occupants and creates the effect/feelings of being in a moving vehicle. A motion simulator can also be called a motion base, motion chassis or a motion seat. The movement is synchronous with visual display and is designed to add a tactile element to video gaming, simulation, and virtual reality. When motion is applied and synchronized to audio and video signals, the result is a combination of sight, sound, and touch. All full motion simulators move the entire occupant compartment and can convey changes in orientation and the effect of false gravitational forces. These motion cues trick the mind into thinking it is immersed in the simulated environment and experiencing kinematic changes in position, velocity, and acceleration. The mind's failure to accept the experience can result in motion sickness. Motion platforms can provide movement on up to six degrees of freedom: three rotational degrees of freedom (roll, pitch, yaw) and three translational or linear degrees of freedom (surge, heave, sway).

Types

Motion simulators can be classified according to whether the occupant is controlling the vehicle, or whether the occupant is a passive rider, also referred to as a simulator ride or motion theater.

• Common examples of occupant-controlled motion simulators are flight simulators, driving simulators, and auto racing games. Other occupant-controlled vehicle simulation games simulate the control of boats, motorcycles, rollercoasters, military vehicles, ATVs, or spacecraft, among other craft types.

• Examples of passive ride simulators are theme park rides where an entire theater system, with a projection screen in front of the seats, is in motion on giant actuators. An enhanced motion vehicle moves the motion base along a track in a show building. See Simulator ride and the Ride simulator section of this article for more details on passive motion simulators.

File:Motion platform 6 axis.JPG

Professional Stewart Hybrid Type Motion System with six degrees of freedom

Historically, motion platforms have varied widely in scale and cost. Those in the category of amusement park rides and commercial and military aircraft simulators are at the high end of this spectrum; arcade style amusement devices fall into the middle of the spectrum, while smaller and lower-costing home-based motion platforms comprise the other end.

Modern motion platforms have become complicated machines, but they have simpler roots. Many of the early motion platforms were flight simulators used to train pilots. One of the first motion platforms, the Sanders Teacher, was created in 1910. The Sanders Teacher was an aircraft with control surfaces fitted to the ground by a simple universal joint. When wind was present, the pilot in training was able to use the control surfaces to move the simulator in the three rotational degrees of freedom. Around 1930, a large advance in motion platform technology was made with the creation of the Link Trainer. The Link Trainer used the control stick and external motors to control organ bellows located under the simulator. The bellows could inflate or deflate, causing the simulator to rotate with three degrees of freedom. In 1958 the Comet IV was designed using a three-degrees-of-freedom hydraulic system. After the Comet IV both the range of motion and the degrees of freedom exhibited by motion platforms was increased. The most expensive motion platforms utilize high-fidelity six-degrees-of-freedom motion, often coupled with advanced audio and visual systems. Today you will find motion platforms in many applications including: flight simulation, driving simulation, amusement rides, and even small home-based motion platforms.

File:Fly-motion.jpg

Fly motion simulator with 6 rotational degrees of freedom

The high-end motion platform has been used in conjunction with military and commercial flight instruction and training applications. Today one can find high-end, multiple-occupant motion platforms in use with entertainment applications in theme parks throughout the world. The systems used in these applications are very large, weighing several tons, and are typically housed in facilities designed expressly for them. As a result of the force required to move the weight of these larger simulator systems and one or more occupants, the motion platform must be controlled by powerful and expensive hydraulic or electromagnetic cylinders. The cost of this type of motion platform exceeds US$100,000, and often goes well into the millions of dollars for the multi-occupant systems found at major theme park attractions. The complexity of these systems require extensive programming and maintenance, further extending the cost.

Low-cost home motion system with 3 rotational degrees of freedom

A typical high-end motion system is the Stewart platform, which provides full 6 degrees of freedom (3 translation and 3 rotation) and employs sophisticated algorithms to provide high-fidelity motions and accelerations. These are used in a number of applications, including flight simulators for training pilots. However, the complexity and expensive mechanisms required to incorporate all degrees of freedom has led to alternative motion simulation technology using mainly the three rotational degrees of freedom. An analysis of capabilities of these systems reveals that a simulator with three rotational degrees of freedom is capable of producing motion simulation quality and vestibular motion sensations comparable to that produced by a Stewart platform. Historically these systems used hydraulics or pneumatics; however, many modern systems use electric actuators.

The middle of the spectrum includes a number of disclosures involving powered motion platforms aimed at arcade-style amusement games, rides, and other arrangements. These systems fall into a price range from $10,000 to $99,000 USD. Typically the space requirements for such a platform are modest requiring only a portion of an arcade room and a smaller range of motion is provided via similar, less expensive, control systems than the high-end platforms.

The lower-cost systems include home-based motion platforms, which have recently become a more common device used to enhance video games, simulation, and virtual reality. These systems fall into a price range from $1,000 to $9,000 USD. Within the 2000s (decade), several individuals and business entities have developed these smaller, more affordable motion systems. Most of these systems were developed mainly by flight simulation enthusiasts, were sold as do it yourself projects, and could be assembled in the home from common components for around one thousand US dollars ($1,000). Recently, there has been increased market interest in motion platforms for more personal, in-home, use. The application of these motion systems extends beyond just flight training simulation into a larger market of more generalized "craft-oriented" simulation, entertainment, and virtual reality systems.

Common uses

Engineering analysis

Motion platforms are commonly used in the field of engineering for analysis and verification of vehicle performance and design. The ability to link a computer-based dynamic model of a particular system to physical motion gives the user the ability to feel how the vehicle would respond to control inputs without the need to construct expensive prototypes. For example, an engineer designing an external fuel tank for an aircraft could have a pilot determine the effect on flying qualities or a mechanical engineer could feel the effects of a new brake system without building any hardware, saving time and money.

Flight simulators are also used by aircraft manufacturers to test new hardware. By connecting a simulated cockpit with visual screen to a real flight control system in a laboratory, integrating the pilot with the electrical, mechanical, and hydraulic components that exist on the real aircraft, a complete system evaluation can be conducted prior to initial flight testing. This type of testing allows the simulation of "seeded faults" (i.e. an intentional hydraulic leak, software error, or computer shutdown) which serve to validate that an aircraft's redundant design features work as intended. A test pilot can also help identify system deficiencies such as inadequate or missing warning indicators, or even unintended control stick motion. This testing is necessary to simulate extremely high risk events that cannot be conducted in flight but nonetheless must be demonstrated. While 6 degree-of-freedom motion is not necessary for this type of testing, the visual screen allows the pilot to "fly" the aircraft while the faults are simultaneously triggered.

Ride simulators

Mining Engineer (Excluding Oil ) Truman from Alma, loves to spend time knotting, largest property developers in singapore developers in singapore and stamp collecting. Recently had a family visit to Urnes Stave Church. Motion simulators are sometimes used in theme parks to give the park guests a themed simulation of flight or other motion.

Some examples:

• Star Tours and its sequel, located at Disneyland and other Disney theme parks, use purpose-modified military flight simulators known as Advanced Technology Leisure Application Simulators (ATLAS) to simulate a flight through outer space.
• Soarin' Over California, located in Disney California Adventure, uses an IMAX dome screen and a hang glider simulation to provide a beautiful simulated flight over many of California's scenic places.
• StormRider is a simulator ride at Tokyo DisneySea.
• Star Trek: The Experience was located at the Las Vegas Hilton between 1998 and 2008. Its "Klingon Encounter" culminated with a state of the art, 6 degrees-of-freedom flight simulator ride including associated space battle movie footage.
• Back to the Future: The Ride, a simulator ride based on the Back to the Future film series, is located at Universal Studios Japan, and formerly at Universal Studios Florida and Universal Studios Hollywood. The ride used DeLorean-based simulator cars that faced a 70-foot-tall IMAX dome screen. In 2008, it was replaced at the Florida and Hollywood parks by another simulator ride, The Simpsons Ride.
• The Funtastic World of Hanna-Barbera (now closed) was one of the original attractions at Universal Studios Florida. The ride used rocket-based simulator cars and a theater-sized screen.
• Jimmy Neutron's Nicktoon Blast (now closed) was located at the Universal Studios Florida theme park where The Funtastic World of Hanna-Barbera had been located. The ride used rocket-based simulator cars and a theater-sized screen.
• The National Air and Space Museum in Washington, D.C., houses a gallery full of two-seat interactive flight simulators doing 360-degree barrel rolls in air combat.
• Europe in the Air, a simulator ride located in Busch Gardens Williamsburg, uses a motion platform, high-definition footage, and wind effects to simulate flight over Europe's notable icons.

Video games

Some driving and flying simulation games allow the use of specialized controllers such as steering wheels, foot pedals or joysticks. Certain game controllers designed in recent years have employed haptic technology to provide realtime, tactile feedback to the user in the form of vibration from the controller. A motion simulator takes the next step by providing the player full-body tactile feedback. Motion gaming chairs can roll to the left and right and pitch forward and backward to simulate turning corners, accelerations and decelerations. Motion platforms permit a more stimulative and potentially realistic gaming experience, and allow for even greater physical correlation to sight and sound in game play.

How human physiology processes and responds to motion

The way we perceive our body and our surroundings is a function of the way our brain interprets signals from our various sensory systems, such as sight, sound, balance and touch. Special sensory pick-up units (or sensory "pads") called receptors translate stimuli into sensory signals. External receptors (exteroceptors) respond to stimuli that arise outside the body, such as the light that stimulates the eyes, sound pressure that stimulates the ear, pressure and temperature that stimulates the skin and chemical substances that stimulate the nose and mouth. Internal receptors (enteroceptors) respond to stimuli that arise from within blood vessels.

Postural stability is maintained through the vestibular reflexes acting on the neck and limbs. These reflexes, which are key to successful motion synchronization, are under the control of three classes of sensory input:

• Proprioceptors are receptors located in your muscles, tendons, joints and the inner ear, which send signals to the brain regarding the body's position. Aircraft pilots sometimes refer to this type of sensory input as the “seat of your pants”.
• The vestibular system contributes to balance and sense of spatial orientation and includes the vestibular organs, ocular system, and muscular system. The vestibular system is contained in the inner ear and interprets rotational motion and linear acceleration. The vestibular system does not interpret vertical motion.
• Visual input from the eye relays information to the brain about the craft's position, velocity, and attitude relative to the ground.

Proprioceptors

Proprioceptors are receptors located in your muscles, tendons, joints and the inner ear, which send signals to the brain regarding the body's position. An example of a "popular" proprioceptor often mentioned by aircraft pilots, is the "seat of the pants". In other words, these sensors present a picture to your brain as to where you are in space as external forces act on your body. Proprioceptors respond to stimuli generated by muscle movement and muscle tension. Signals generated by exteroceptors and proprioceptors are carried by sensory neurons or nerves and are called electrochemical signals. When a neuron receives such a signal, it sends it on to an adjacent neuron through a bridge called a synapse. A synapse "sparks" the impulse between neurons through electrical and chemical means. These sensory signals are processed by the brain and spinal cord, which then respond with motor signals that travel along motor nerves. Motor neurons, with their special fibres, carry these signals to muscles, which are instructed to either contract or relax.

The downfall with our internal motion sensors is that once a constant speed or velocity is reached, these sensors stop reacting. Your brain now has to rely on visual cues until another movement takes place and the resultant force is felt. In motion simulation, when our internal motion sensors can no longer detect motion, a “washout” of the motion system may occur. A washout allows the motion platform occupant to think they are making a continuous movement when actually the motion has stopped. In other words, washout is where the simulator actually returns to a central, home, or reference position in anticipation of the next movement. This movement back to neutral must occur without the occupant actually realizing what is happening. This is an important aspect in motion simulators as the human feel sensations must be as close to real as possible.

Vestibular system

File:VestibularSystem.gif

Figure 1 The labyrinth of the inner ear, from the left ear. It contains i) the cochlea (yellow), which is the peripheral organ of our auditory system; ii) the semicircular canals (brown), which transduce rotational movements; and iii) the otolithic organs (in the blue/purple pouches), which transduce linear accelerations. The light blue pouch is the endolymphatic sac, and contains only fluid.

The vestibular system is the balancing and equilibrium system of the body that includes the vestibular organs, ocular system, and muscular system. The vestibular system is contained in the inner ear. It consists of three semicircular canals, or tubes, arranged at right angles to one another. Each canal is lined with hairs connected to nerve endings and is partially filled with fluid. When the head experiences acceleration the fluid moves within the canals, causing the hair follicles to move from their initial vertical orientation. In turn the nerve endings fire resulting in the brain interpreting the acceleration as pitch, roll, or yaw.

There are, however, three shortcomings to this system. First, although the vestibular system is a very fast sense used to generate reflexes to maintain perceptual and postural stability, compared to the other senses of vision, touch and audition, vestibular input is perceived with delay. Indeed, although engineers typically try and reduce delays between physical and visual motion, it has been shown that a motion simulator should move about 130ms before visual motion in order to maximize motion simulator fidelity. Second, if the head experiences sustained accelerations on the order of 10 – 20 seconds, the hair follicles return to the “zero” or vertical position and the brain interprets this as the acceleration ceasing. Additionally, there is a lower acceleration threshold of about 2 degrees per second that the brain cannot perceive. In other words, slow and gradual enough motion below the threshold will not affect the vestibular system. As discussed in the preceding “Proprioceptors” section, this shortfall actually allows the simulator to return to a reference position in anticipation of the next movement.

Visual inputs

The human eye is the most important source of information in motion simulation. The eye relays information to the brain about the craft's position, velocity, and attitude relative to the ground. As a result, it is essential for realistic simulation that the motion works in direct synchronization to what is happening on the video output screen. Time delays cause disagreement within the brain, due to error between the expected input and the actual input given by the simulator. This disagreement can lead to dizziness, fatigue and nausea in some people.

For example, if the occupant commands the vehicle to roll to the left, the visual displays must also roll by the same magnitude and at the same rate. Simultaneously, the cab tilts the occupant to imitate the motion. The occupant’s proprioceptors and vestibular system sense this motion. The motion and change in the visual inputs must align well enough such that any discrepancy is below the occupant’s threshold to detect the differences in motion.

In order to be an effective training or entertainment device, the cues the brain receives by each of the body’s sensory inputs must agree.

Putting it together - how simulators trick the body

It is physically impossible to correctly simulate large scale ego-motion in the limited space of a laboratory. The standard approach to simulate motions (so called motion cueing) is to simulate the “relevant” cues as closely as possible, especially the acceleration of an observer. Visual and auditory cues enable humans to perceive their location in space on an absolute scale. On the other hand, the somatosensory cues, mainly proprioception and the signals from the vestibular system, code only relative information. But fortunately (for our purpose), humans cannot perceive accelerations and velocities perfectly and without systematic errors. And this is where the tricky business of motion simulation starts. We can use those imperfections of the human sensory and perceptual systems to cheat intelligently.

Linear movements

In principle, velocity cannot be directly perceived by relative cues alone, like those from the vestibular system. For such a system, flying in space with some constant velocity is not different from sitting in a chair. However, changing the velocity is perceived as acceleration, or force acting on the human body. For the case of constant linear acceleration, a substitute for the real situation is simple. Since the amplitude of the acceleration is not very well perceived by humans, one can tilt the subject backwards and use the gravity vector as a replacement for correct resulting force from gravity and forward acceleration. In this case, leaning backwards is therefore not perceived differently from being constantly accelerated forwards.

Linear accelerations

Linear accelerations are detected by otoliths. The otolith structure is simpler than the three-axis semicircular canals that detect angular accelerations. The otoliths contain calcium carbonate particles that lag behind head movement, deflecting hair cells. These cells transmit motion information to the brain and oculomotor muscles. Studies indicate that the otoliths detect the tangential component of the applied forces. A transfer function model between the perceived force $y(s)$ and the applied forces $f(s)$ is given by:

${\frac {y(s)}{f(s)}}={\frac {2.02(s+0.1)}{s+0.2}}$

Based on centrifuge experiments, threshold values of 0.0011 ft/s² have been reported; values up to 0.4 ft/s² have been reported based on airborne studies in the USSR. The same studies suggest that the threshold is not a linear acceleration but rather a jerk motion (third time derivative of position), and the reported threshold value is on the order of 0.1 ft/s³. These findings are supported by early studies showing that human movement kinematics is represented by characteristics of jerk profiles.

Rotational movements

Unfortunately, there is no easy way of cheating for rotations. Hence, many motion simulations try to avoid the problem by avoiding quick and large rotations altogether. The only convincing way of simulating larger turns is an initial yaw rotation above threshold and a back-motion below threshold. For roll and pitch, the static (otolithic) cues cannot be modified easily due to the ambiguity of linear accelerations and changes in gravitational direction. In real life, the ambiguity is resolved by using the dynamical properties of the vestibular and other sensory signals (most importantly, vision).

Angular accelerations

Angular accelerations are detected by semicircular canals while linear accelerations are detected by another structure in the inner ear called the otolith.

The three semicircular canals are mutually orthogonal (similar to three-axis accelerometer) and are filled with a fluid called the endolymph. In each canal, there is a section where the diameter is larger than the rest of the canal. This section is called the ampulla and is sealed by a flap called the cupula. Angular accelerations are detected as follows: an angular acceleration causes the fluid in the canals to move, deflecting the cupula. The nerves in the cupula report the motion to both the brain and oculomotor muscles, stabilizing eye movements. A transfer function model between the perceived angular displacement $y(s)$ and the actual angular displacement $phi(s)$ is:

${\frac {y(s)}{phi(s)}}={\frac {0.07s^{3}(s+50)}{(s+0.05)(s+0.03)}}$

A second-order model of the angle of the cupula $\theta$ is given by

${\ddot {\theta }}+2\zeta \omega _{n}{\dot {\theta }}+\omega _{n}\theta =u(t)$

where $\zeta$ is the damping ratio, $\omega _{n}$ is the natural frequency of the cupula, and $u(t)$ is the input angular acceleration. Values of $\zeta$ have been reported to be between 3.6 and 6.7 while values of $\omega _{n}$ have been reported to be between 0.75 and 1.9. Thus, the system is overdamped with distinct, real roots. The shorter time constant is 0.1 seconds, while the longer time constant depends on the axis about which the test subject is accelerating (roll, pitch, or yaw). These time constants are one to two orders of magnitude greater than the shorter time constant.

Experiments have shown that angular accelerations below a certain level cannot be detected by a human test subject. Values of $0.5^{\circ }/\sec ^{2}$ have been reported for pitch and roll accelerations in a flight simulator.

Implications

The above studies indicate that the pilot's vestibular system detects accelerations before the aircraft instruments displays them. This can be considered an inner control loop in which the pilots responds to accelerations that occur in full-motion simulators and aircraft, but not in fixed simulators. This effect shows that there is a potential negative training transfer when transitioning from a fixed-based simulator to an aircraft and indicates the need for motion systems for pilot training.

It is physically impossible to precisely simulate large scale egomotion in the limited space of a laboratory. There is simply no way around the physics. However, by exploiting some of the imperfections of the body’s sensory and perceptual systems, it is possible to create an environment in which the body perceives motion without actually moving the subject more than a few feet in any one direction. This is where the tricky business of motion simulation begins.

The standard approach to simulating motion (so called motion cueing) is to simulate the “relevant” cues as closely as possible which trigger motion perception. These cues can be visual, auditory, or somatosensory in nature. Visual and auditory cues enable humans to perceive their location in space on an absolute scale, whereas somatosensory cues (mainly proprioception and other signals from the vestibular system) provide only relative feedback. Fortunately for us, humans cannot perceive velocity and acceleration directly without some form of error or uncertainty.

For example, consider riding in a car traveling at some arbitrary constant speed. In this situation, our sense of sight and sound provide the only cues (excluding engine vibration) that the car is moving; no other forces act on the passengers of the car except for gravity. Next, consider the same example of a car moving at constant speed except this time, all passengers of the car are blindfolded. If the driver were to step on the gas, the car would accelerate forward thus pressing each passenger back into their seat. In this situation, each passenger would perceive the increase in speed by sensing the additional pressure from the seat cushion. However, if the car were traveling in reverse and the driver stepped on the brake pedal instead of the gas, the deceleration of the vehicle would create the same feeling of increased pressure from the seat cushion as in the case of acceleration that the passengers would be unable to distinguish which direction the vehicle is actually moving.

Summary of most commonly used “tricks”

• Moving the observer below detection threshold to gain additional simulation space
• Trading the gravity vector for acceleration (tilting the seat)
• Masking not-to-be-detected motions by noise (i.e., vibrations and jitter)
• Guiding the attention of the observer away from the imperfections of the motion simulation

Impact

Impact of motion in simulation and gaming

The use of physical motion applied in flight simulators has been a debated and researched topic. The Engineering department at the University of Victoria conducted a series of tests in the 1980s, to quantify the perceptions of airline pilots in flight simulation and the impact of motion on the simulation environment. In the end, it was found that there was a definite positive effect on how the pilots perceived the simulation environment when motion was present and there was almost unanimous dislike for the simulation environment that lacked motion. A conclusion that could be drawn on the findings of the Response of Airline Pilots study is that the realism of the simulation is in direct relationship to the accuracy of the simulation on the pilot. When applied to video gaming and evaluated within our own gaming experiences, realism can be directly related to the enjoyment of a game by the game player. In other words – motion enabled gaming is more realistic, thus more iterative and more stimulating. However, there are adverse effects to the use of motion in simulation that can take away from the primary purpose of using the simulator in the first place such as Motion Sickness. For instance, there have been reports of military pilots throwing off their vestibular system because of moving their heads around in the simulator similar to how they would in an actual aircraft to maintain their sensitivity to accelerations. However, due to the limits on simulator acceleration, this effect becomes detrimental when transitioning back to a real aircraft.

Adverse effects (simulator sickness)

Motion or simulator sickness: Simulators work by “tricking” the mind into believing that the inputs it is receiving from visual, vestibular and proprioceptive inputs are a specific type of desired motion. When any of the cues received by the brain do not correlate with the others, motion sickness can occur. In principle, simulator sickness is simply a form of motion sickness that can result from discrepancies between the cues from the three physical source inputs. For example, riding on a ship with no windows sends a cue that the body is accelerating and rotating in various directions from the vestibular system, but the visual system sees no motion since the room is moving in the same manner as the occupant. In this situation, many would feel motion sickness.

Along with simulator sickness, additional symptoms have been observed after exposure to motion simulation. These symptoms include feelings of warmth, pallor and sweating, depression and apathy, headache and fullness of head, drowsiness and fatigue, difficulty focusing eyes, eye strain, blurred vision, burping, difficulty concentrating, and visual flashbacks. Lingering effects of these symptoms were observed to sometimes last up to a day or two after exposure to the motion simulator.

Contributing factors to simulator sickness

Several factors contribute to simulation sickness, which can be categorized into human variables, simulator usage, and equipment. Common human variable factors include susceptibility, flight hours, fitness, and medication/drugs. An individual’s variance in susceptibility to motion sickness is a dominant contributing factor to simulator sickness. Increasing flight hours is also an issue for pilots as they become more accustomed to the actual motion in a vehicle. Contributing factors due to simulator usage are adaptation, distorted or complicated scene content, longer simulation length, and freeze/reset. Freeze/reset refers to the starting or ending points of a simulation, which should be as close to steady and level conditions as possible. Clearly, if a simulation is ended in the middle of an extreme maneuver then the test subjects IMU system is likely to be distorted. Simulator equipment factors that contribute to motion sickness are quality of motion system, quality of visual system, off-axis viewing, poorly aligned optics, flicker, and delay/mismatch between visual and motion systems. The delay/mismatch issue has historically been a concern in simulator technology, where time lag between pilot input and the visual and motion systems can cause confusion and generally decrease simulator performance.

Debate over performance enhancement from motion simulators

In theory, the concept of motion simulators seem self-explanatory: if the perception of events can be mimicked exactly, they will provide the user an identical experience. However, this ideal performance is next to impossible to achieve. Although the motion of vehicles can be simulated in 6 degrees of freedom (all that should be required to mimic motion), the impacts of simulated motion on pilots, and operators in many other fields, often leave trainees with a multitude of adverse side effects not seen in un-simulated motion. Further, there are many scenarios which may be difficult to simulate in training simulators exposing a concern that replacing real world exposure with motion simulations may be inadequate.

Due to the exorbitant cost of adding motion to simulators, military programs have established research units to investigate the impact of “skill acquisition” with the use of motion simulators. These units have provided results as recent as 2006 despite the use motion simulators over the last century. From an Army study, it was determined that “motion-based simulators are recommended for training when individuals must continue to perform skill-based tasks…while the ground vehicle negotiates rough terrain.” However, if individuals are not required to negotiate rough terrain, or motion sickness does not detract from performance in the field, then “motion is not recommended.”

The existence of adverse side effects of virtual environments has spawned a plethora of studies from predicting and measuring the impact of the side effects to identifying their specific causes.

Advantages and disadvantages of simulation in training

Advantages

• Simulators provide a safe means of training in the operation of potentially dangerous craft (e.g., aircraft).
• The expense of training on real equipment can sometimes exceed the expense of a simulator.
• Time between training sessions may be reduced since it may be as simple as resetting the motion system to initial conditions.

Disadvantages

• The true environment may not be mimicked identically; therefore the pilot/rider may be confused by the lack of expected sensations or not properly prepared for the real environment.
• Lining up all sensor inputs to eliminate or at least mitigate the risk of "simulator sickness" can be challenging.
• Age of participant as well as amount of experience in true environment modifies reactions to simulated environment.

See also

Most brokers paid and post their listings at these online property categorised portals but fail to realise that there is simply extra to it. They fail to leverage on one of the vital well-liked on-line advertising and marketing tool of their marketing campaign and that is through the social media.

In case you are among the many few who've passed the grueling Actual Estate Salesperson (RES) course, congratulations. So what next? Which agency should you be a part of? Earlier than taking the plunge, you will need to choose the proper mentor who can educate you the ropes in actual estate. An excellent mentor will allow you to navigate the complex world of real property by instructing you the way to get listings, advertising and marketing methods, real estate contracts and methods to closing your deal. He will even caution you on errors to keep away from that would land you in trouble. This has been reflected within the Industrial Production reading index for prescribed drugs. In June, the reading fell to one hundred thirty from 287. Effectively if you do not, you then're simply leaving your actual property enterprise to chance. Commons for rent

Thanks to hirepropertyagent.com.sg, i've discovered myself a good agent. He did a great job promoting my property and it was bought at an excellent value." JLL appointed unique agent for the sale of 2, 4 and 6 Dunlop Street by Expression of Curiosity. Uncommon Industrial Growth inside Pandan Meals Zone space up for sale conserving you updated with the property market 3. Work @ Residence IT Solutions As property costs cool in Hong Kong and Singapore, which have lengthy been magnets for Chinese language funding, extra money is flowing to actual property markets comparable to New York, London and Sydney. Chinese language have overtaken Russians house for sale in singapore the primary time as the biggest buyers of flats in Manhattan, in response to actual estate brokers. Condominium For Lease – Tribeca by the Waterfront (D09)

Property developer and residential landlord for flats and homes for lease and sale. Most property firms share the same database of property listings in Singapore. Due to this fact it is best to solely use only ONE agent at a time. In case you approach many agents at the similar time, very likely that they'll present you the same property. A lot confusion and embarrassment will arise should you engage many brokers. One of the best, and most of the time only, strategy to discover a good property agent in Singapore is phrase-of-mouth. Ask your friends and colleagues for reference. It is very simple to provide you with a couple of candidates since a lot of the expatriates dwelling in Singapore for a long time can have several good agent contacts to guide you. Toa Payoh, Singapore Singapore 319378 Estate

This is precisely what happened to me and my husband at the moment, to not point out a very unscrupulous developer operating in a really unprofessional manner. I need to share this story with everyone here, and please pass the message round particularly among expats communities, beware while you want to purchase property developed by VicLand Pte Ltd and if developer's agent is ECG property. There was only one unit left on the market by developer, 03-09, a 3 bed room flat. On the time my husband was out of town, and initially I liked what I saw so I instructed the developer's agent and my agent we should come back with my husband in two weeks to view it once more and make a decision after ward. Complaint / Suggestions about lousy property agent Darren Ng from Dennis Wee

This bought me thinking and I started to surprise – how much does a property agent really earn? We often hear or read about sure brokers making million dollar commissions, however is that the exception or the norm? That piqued my curiosity. Like any job, those who put in time and effort will do well and rise to the top. The ethics of exhausting work apply to the true property market as nicely. For individuals who are pondering of making a career change to develop into a property agent, you should be ready to invest the trouble to do properly. Otherwise you may just add to the statistic of brokers who eventually drop out of the realtor game. Properties that do not fall within the definition of residential properties stated above are non-residential properties Web site - www.riaschool.com.sg

Ought to you are on the lookout for new properties for investment or for own stay, we offer property recommendation and search services tailored to your needs. We have represented many together with worldwide and local buyers in efficiently finishing their property purchases. We work with main builders to bring you the latest and one of the best prime properties in Singapore. We are a one-cease service that may full your property cycle from purchase to sale. Property agents for Singapore Land Authority protecting among the government colonial properties for rent. Property leases for expatriates and foreigners. Also helps expats to purchase and promote their properties as well as property investment opportunities in Singapore and China. The Restaurant Affiliation of Singapore

• Degrees of freedom (mechanics)
• Driving simulator
• Flight simulator
• Kinematics
• Simulator sickness
• Stewart platform
• Vestibular system

References

43 year old Petroleum Engineer Harry from Deep River, usually spends time with hobbies and interests like renting movies, property developers in singapore new condominium and vehicle racing. Constantly enjoys going to destinations like Camino Real de Tierra Adentro.