Visual angle

Template:Ref improve The Fanning friction factor, named after John Thomas Fanning (1837–1911), is a dimensionless number used in fluid flow calculations. It is related to the shear stress at the wall as:

$\tau ={\frac {f\rho v^{2}}{2}}$

where:

• $\tau$ is the shear stress at the wall
• $f$ is the Fanning friction factor of the pipe
• $v$ is the fluid velocity in the pipe
• $\rho$ is the density of the fluid

The wall shear stress can, in turn, be related to the pressure loss by multiplying the wall shear stress by the wall area ($2\pi RL$ for a pipe) and dividing by the cross-sectional flow area ($\pi R^{2}$ for a pipe).

The friction head can be related to the pressure loss due to friction by dividing the pressure loss by the product of the acceleration due to gravity and the density of the fluid. Accordingly, the relationship between the friction head and the Fanning friction factor is:

$h_{f}={\frac {2fv^{2}L}{gD}}$

where:

• $h_{f}$ is the friction loss (in head) of the pipe.
• $f$ is the Fanning friction factor of the pipe.
• $v$ is the fluid velocity in the pipe.
• $L$ is the length of pipe.
• $g$ is the local acceleration of gravity.
• $D$ is the pipe diameter.

Fanning friction factor formulæ

This friction factor is one-fourth of the Darcy friction factor, so attention must be paid to note which one of these is meant in the "friction factor" chart or equation consulted. Of the two, the Fanning friction factor is the more commonly used by Chemical Engineers and those following the British convention.

The formulae below may be used to obtain the Fanning friction factor for common applications.

The friction factor for laminar flow in round tubes is often taken to be:

$f={\frac {16}{Re}}$

where Re is the Reynolds number of the flow.

For a square channel the value used is:

$f={\frac {14.227}{Re}}$

The Darcy friction factor can also be expressed as

$f={\frac {8\tau _{w}}{\rho V_{avg}^{2}}}$

where:

• $\tau _{w}$ is the shear stress at the wall
• $\rho$ is the density of the fluid
• $V_{avg}$ is the average fluid velocity

For the turbulent flow regime, the relationship between the Fanning friction factor and the Reynolds number is more complex and is governed by the Colebrook equation which is implicit in $f$:

${1 \over {\sqrt {\mathit {f}}}}=-4.0\log _{10}\left({\frac {\frac {\epsilon }{d}}{3.7}}+{\frac {1.256}{Re{\sqrt {\mathit {f}}}}}\right),{\text{turbulent flow}}$

Various explicit approximations of the related Darcy friction factor have been developed for turbulent flow.

Stuart W. Churchill developed a formula that covers the friction factor for both laminar and turbulent flow (note that $f$ represents the Moody friction factor).

$f=8\left(\left({\frac {8}{Re}}\right)^{12}+\left(A+B\right)^{-1.5}\right)^{\frac {1}{12}}$

$A=\left(2.457\ln \left(\left(\left({\frac {7}{Re}}\right)^{0.9}+0.27{\frac {\epsilon }{D}}\right)^{-1}\right)\right)^{16}$

$B=\left({\frac {37530}{Re}}\right)^{16}$