Tilde

In mathematics and computer programming, the order of operations (sometimes called operator precedence) is a rule used to clarify which procedures should be performed first in a given mathematical expression.

For example, in mathematics and most computer languages multiplication is done before addition; in the expression 2 + 3 × 4, the answer is 14. Brackets, "( and ), { and }, or [ and ]", which have their own rules, may be used to avoid confusion, thus the preceding expression may also be rendered 2 + (3 × 4), but the brackets are unnecessary as multiplication still has precedence without them.

Since the introduction of modern algebraic notation, multiplication has taken precedence over addition. Thus 3 + 4 × 5 = 4 × 5 + 3 = 23. When exponents were first introduced in the 16th and 17th centuries, exponents took precedence over both addition and multiplication and could be placed only as a superscript to the right of their base. Thus 3 + 5² = 28 and 3 × 5² = 75. To change the order of operations, originally a vinculum (an overline or underline) was used. Today, parentheses or brackets are used to explicitly denote precedence by grouping parts of an expression that should be evaluated first. Thus, to force addition to precede multiplication, we write (2 + 3) × 4 = 20, and to force addition to precede exponentiation, we write (3 + 5)² = 64.

The standard order of operations

The order of operations used throughout mathematics, science, technology and many computer programming languages is expressed here:

exponents and roots

multiplication and division

addition and subtraction

This means that if a mathematical expression is preceded by one operator and followed by another, the operator higher on the list should be applied first. The commutative and associative laws of addition and multiplication allow terms to be added in any order and factors to be multiplied in any order, but mixed operations must obey the standard order of operations.

It is helpful to treat division as multiplication by the reciprocal (multiplicative inverse) and subtraction as addition of the opposite (additive inverse). Thus 3/4 = 3 ÷ 4 = 3 • ¼; in other words the quotient of 3 and 4 equals the product of 3 and  ¼. Also 3 − 4 = 3 + (−4); in other words the difference of 3 and 4 equals the sum of positive three and negative four. With this understanding, we can think of 1 − 3 + 7 as the sum of 1, negative 3, and 7, and add in any order: (1 − 3) + 7 = −2 + 7 = 5 and in reverse order (7 − 3) + 1 = 4 + 1 = 5. The important thing is to keep the negative sign with the 3.

The root symbol, √, requires a symbol of grouping around the radicand. The usual symbol of grouping is a bar (called vinculum) over the radicand. Other functions use parentheses around the input to avoid ambiguity. The parentheses are sometimes omitted if the input is a monomial. Thus, sin x = sin(x), but sin x + y = sin(x) + y, because x + y is not a monomial. Calculators usually require parentheses around all function inputs.

Stacked exponents are applied from the top down, i.e., from right to left.

Symbols of grouping can be used to override the usual order of operations. Grouped symbols can be treated as a single expression. Symbols of grouping can be removed using the associative and distributive laws, also they can be removed if the expression inside the symbol of grouping is sufficiently simplified so no ambiguity results from their removal.

Examples

${\sqrt {1+3}}+5={\sqrt {4}}+5=2+5=7.\,$

A horizontal fractional line also acts as a symbol of grouping:

${\frac {1+2}{3+4}}+5={\frac {3}{7}}+5.$

For ease in reading, other grouping symbols such as braces, sometimes called curly braces { }, or brackets, sometimes called square brackets [ ], are often used along with parentheses ( ). For example,

$[(1+2)-3]-(4-5)=[3-3]-(-1)=1.\,$

Exceptions to the standard

There exist differing conventions concerning the unary operator − (usually read "minus"). In written or printed mathematics, the expression −3² is interpreted to mean −(3²) = −9, but in some applications and programming languages, notably the application Microsoft Office Excel and the programming language bc, unary operators have a higher priority than binary operators, that is, the unary minus (negation) has higher precedence than exponentiation, so in those languages −3² will be interpreted as (−3)² = 9. Note this does not apply to the binary operator −; for example while the formulas =-2^2 and =0+-2^2 return 4 in Microsoft Excel, the formula =0-2^2 returns −4. In cases where there is the possibility that the notation might be misinterpreted, parentheses are usually used to clarify the intended meaning, however due to the syntax of most major programming languages, it is usually hard or impossible to be ambiguous.

Similarly, there can be ambiguity in the use of the slash ('/') symbol in expressions such as 1/2x. If one rewrites this expression as 1 ÷ 2 × x and then interprets the division symbol as indicating multiplication by the reciprocal, this becomes

$1\div 2\times x=1\times {\tfrac {1}{2}}\times x={\tfrac {1}{2}}x.$

Hence, with this interpretation we have that 1/2x is equal to (1/2)x, and not 1/(2x). However, there are examples, including in published literature, where implied multiplication is interpreted as having higher precedence than division, so that 1/2x equals 1/(2x), not (1/2)x. For example, the manuscript submission instructions for the Physical Review journals state that multiplication is of higher precedence than division with a slash, and this is also the convention observed in prominent physics textbooks such as the Course of Theoretical Physics by Landau and Lifshitz and the Feynman Lectures on Physics. Wolfram Alpha changed in early 2013 to treat implied multiplication the same as explicit multiplication (formerly, implied multiplication without parentheses was assumed to bind stronger than explicit multiplication). 2x/2x, 2*x/2*x, and 2(x)/2(x) now all yield x². The TI 89 and TI 86 calculators also yield x² in all three cases.

Mnemonics

Before you choose any particular company it is vital to understand in full how the different plans can vary. There is no other better method than to create a message board so that people can relax and "chill" on your website and check out your articles more. You should read the HostGator review, even before registering with a web hosting company. but Hostgator in addition considers the surroundings. You can even use a Hostgator reseller coupon for unlimited web hosting at HostGator! Most of individuals by no means go for yearly subscription and choose month to month subscription. Several users commented that this was the deciding factor in picking HostGator but in any case there is a 45 day Money Back Guarantee and there is no contract so you can cancel at any time. GatorBill is able to send you an email notice about the new invoice. In certain cases a dedicated server can offer less overhead and a bigger revenue in investments. With the plan come a Free Billing Executive, Free sellers account and Free Hosting Templates.



This is one of the only things that require you to spend a little money to make money. Just go make an account, get a paypal account, and start selling. To go one step beyond just affiliating products and services is to create your own and sell it through your blog. Not great if you really enjoy trying out all the themes. Talking in real time having a real person causes it to be personal helping me personally to sort out how to proceed. The first step I took was search for a discount code, as I did with HostGator. Using a HostGator coupon is a beneficial method to get started. As long as the necessities are able to preserve the horizontal functionality of your site, you would pretty much be fine.

Mnemonics are often used to help students remember the rules, but the rules taught by the use of acronyms can be misleading. In the United States the acronym PEMDAS is common. It stands for Parentheses, Exponents, Multiplication, Division, Addition, Subtraction. PEMDAS is often expanded to "Please Excuse My Dear Aunt Sally" with the first letter of each word creating the acronym PEMDAS. Canada uses BEDMAS. It stands for Brackets, Exponents, Division, Multiplication, Addition, Subtraction. The UK and Australia use BODMAS or BIDMAS. In Canada and other English speaking countries, Parentheses may be called Brackets, or symbols of inclusion and Exponents may be called either Indices, Powers or Orders, which have the same precedence as Roots or Radicals. Since multiplication and division are of equal precedence, M and D are often interchanged, leading to such acronyms as BOMDAS. The original order of operations in most countries was BODMAS which stood for Brackets, Orders, Division, Multiplication, Addition, Subtraction. This mnemonic was used until exponentials were added into the mnemonic.

These mnemonics may be misleading when written this way, especially if the user is not aware that multiplication and division are of equal precedence, as are addition and subtraction. Using any of the above rules in the order "addition first, subtraction afterward" would also give the wrong answer to the problem

$10-3+2\,$.

The correct answer is 9 (and not 5, which we get when we do the addition first and then the subtraction). The best way to understand a combination of addition and subtraction is to think of the subtraction as addition of a negative number. In this case, we see the problem as the sum of positive ten, negative three, and positive two.

$10+(-3)+2\,$

To emphasize that addition and subtraction have the same precedence (and multiplication and division have the same precedence) the mnemonic is sometimes written P E MD AS; or, simply as PEMA.

All of these acronyms conflate two different ideas, operations on the one hand and symbols of grouping on the other, which can lead to confusion.

Special cases

If exponentiation is indicated by stacked symbols, the usual rule is to work from the top down, thus

$a^{b^{c}}=a^{(b^{c})}$,

which typically is not equal to $(a^{b})^{c}$. However, some computer systems may resolve the ambiguous expression differently. For example, Microsoft Office Excel evaluates a^b^c as (a^b)^c which is opposite of normally accepted convention of top-down order of execution for exponentiation. If a=4, p=3, and q=2, $a^{p^{q}}$ is evaluated to be 4096 in Microsoft Excel 2013, the same as $(a^{p})^{q}$. The expression $a^{(p^{q})}$, on the other hand, results in 262144 using the same program.

Calculators

Mining Engineer (Excluding Oil ) Truman from Alma, loves to spend time knotting, largest property developers in singapore developers in singapore and stamp collecting. Recently had a family visit to Urnes Stave Church.

Different calculators follow different orders of operations. Most non-scientific calculators without a stack work left to right without any priority given to different operators, for example giving

$1+2\times 3=9,\;$

while more sophisticated calculators will use a more standard priority, for example giving

$1+2\times 3=7.\;$

The Microsoft Calculator program uses the former in its standard view and the latter in its scientific and programmer views.

The non-scientific calculator expects two operands and an operator. When the next operator is pressed, the expression is immediately evaluated and the answer becomes the left hand of the next operator. Advanced calculators allow entry of the whole expression, grouped as necessary, and evaluates only when the user uses the equals sign.

Calculators may associate exponents to the left or to the right depending on the model. For example, the expression a ^ b ^ c on the TI-92, the TI-30XII and the TI-30XS MultiView (all Texas Instruments calculators) associate two different ways:

The TI-92 and the TI-30XS MultiView in "MathPrint Mode" associate to the right, that is

a ^ b ^ c = a ^ (b ^ c) = $a^{(b^{c})}=a^{b^{c}}$

whereas, the TI-30XII and the TI-30XS MultiView in "Classic Mode" associate to the left, that is

a ^ b ^ c = (a ^ b) ^ c = $(a^{b})^{c}.$

An expression like 1/2x is interpreted as 1/(2x) by TI-82, but as (1/2)x by TI-83. While the first interpretation may be expected by some users, only the latter is in agreement with the standard rule that multiplication and division are of equal precedence,Potter or Ceramic Artist Truman Bedell from Rexton, has interests which include ceramics, best property developers in singapore developers in singapore and scrabble. Was especially enthused after visiting Alejandro de Humboldt National Park. so 1/2x is read one divided by two and the answer multiplied by x.

When the user is unsure how a calculator will interpret an expression, it is a good idea to use parentheses so there is no ambiguity.

Calculators that utilize reverse Polish notation, also known as postfix notation, use stack to enter formulas without the need for parentheses.

Programming languages

Many programming languages use precedence levels that conform to the order commonly used in mathematics, though some, such as APL and Smalltalk, have no operator precedence rules (in APL, evaluation is strictly right to left; in Smalltalk, it's strictly left to right).

The logical bitwise operators in C (and all programming languages that borrowed precedence rules from C, for example, C++, Perl and PHP) have a precedence level that the creator of the C language considered to be unsatisfactory. However, many programmers have become accustomed to this order. The relative precedence levels of operators found in many C-style languages are as follows:

1	()   []   ->   .   ::	Grouping, scope, array/member access
2	!   ~   -   +   *   &   sizeof   type cast ++x   --x	(most) unary operations, sizeof and type casts
3	*   /   %	Multiplication, division, modulo
4	+   -	Addition and subtraction
5	<<   >>	Bitwise shift left and right
6	<   <=   >   >=	Comparisons: less-than, ...
7	==   !=	Comparisons: equal and not equal
8	&	Bitwise AND
9	^	Bitwise exclusive OR
10	|	Bitwise inclusive (normal) OR
11	&&	Logical AND
12	||	Logical OR
13	?:   =   +=   -=   *=   /=   %=   &=   |=   ^=   <<=   >>=	Conditional expression (ternary) and assignment operators
14	,	Comma operator

Examples:

• !A + !B ≡ (!A) + (!B)
• ++A + !B ≡ (++A) + (!B)
• A + B * C ≡ A + (B * C)
• A || B && C ≡ A || (B && C)
• (A && B == C) ≡ (A && (B == C) )

Source-to-source compilers that compile to multiple languages need to explicitly deal with the issue of different order of operations across languages. Haxe for example standardizes the order and enforces it by inserting brackets where it is appropriate.

The accuracy of software developer knowledge about binary operator precedence has been found to closely follow their frequency of occurrence in source code.

See also

• Common operator notation (for a more formal description)
• Operator associativity
• Associativity
• Commutativity
• Distributivity
• Operator (programming)
• Operator overloading
• Operator precedence in C and C++
• Reverse Polish Notation
• Hyperoperation

External links

• Template:Planetmath reference

30 year-old Entertainer or Range Artist Wesley from Drumheller, really loves vehicle, property developers properties for sale in singapore singapore and horse racing. Finds inspiration by traveling to Works of Antoni Gaudí.