# Free-space path loss

Template:More footnotes
In telecommunication, **free-space path loss** (**FSPL**) is the loss in signal strength of an electromagnetic wave that would result from a line-of-sight path through free space (usually air), with no obstacles nearby to cause reflection or diffraction. It is defined in "Standard Definitions of Terms for Antennas", IEEE Std 145-1983, as "The loss between two isotropic radiators in free space, expressed as a power ratio." Usually it is expressed in dB, although the IEEE standard does not say that. So it assumes that the antenna gain is a power ratio of 1.0, or 0 dB. It does not include any loss associated with hardware imperfections, or the effects of any antennas gain. A discussion of these losses may be found in the article on link budget. The **FSPL** is rarely used standalone, but rather as a part of the Friis transmission equation, which includes the gain of antennas.

## Free-space path loss formula

Free-space path loss is proportional to the square of the distance between the transmitter and receiver, and also proportional to the square of the frequency of the radio signal.

The equation for FSPL is

where:

- is the signal wavelength (in metres),
- is the signal frequency (in hertz),
- is the distance from the transmitter (in metres),
- is the speed of light in a vacuum, 2.99792458 × 10
^{8}metres per second.

This equation is only accurate in the far field where spherical spreading can be assumed; it does not hold close to the transmitter.

## Free-space path loss in decibels

A convenient way to express FSPL is in terms of dB:

where the units are as before.

For typical radio applications, it is common to find measured in units of MHz and in km, in which case the FSPL equation becomes

For in meters and kilohertz, respectively, the constant becomes .

For in meters and megahertz, respectively, the constant becomes .

For in kilometers and megahertz, respectively, the constant becomes .

## Physical explanation

The FSPL expression above often leads to the erroneous belief that free space attenuates an electromagnetic wave according to its frequency. This is not the case, as there is no physical mechanism that could cause this. The expression for FSPL actually encapsulates two effects.

### Distance dependency

Dependency of the FSPL on distance is caused by the spreading out of electromagnetic energy in free space and is described by the inverse square law, i.e.

where:

- is the power per unit area or power spatial density (in watts per metre-squared) at distance ,
- is the equivalent isotropically radiated power (in watts).

Note that this is not a frequency-dependent effect.

### Frequency dependency

The frequency dependency is somewhat more confusing. The question is often asked: Why should path loss, which is just a geometric inverse-square loss, be a function of frequency? The answer is that path loss is *defined* on the use of an isotropic receiving antenna ().^{[1]}^{:sec. 5.3.3, p. 256} This can be seen if we derive the **FSPL** from the Friis transmission equation.

Hence path loss is a convenient tool; it represents a hypothetical received-power loss that would occur if the receiving antenna were isotropic. Therefore the **FSPL** can be viewed as a convenient collection of terms that have been assigned the unfortunate name *path loss*. This name calls up an image of purely geometric effect and fails to emphasize the requirement that . A better choice of the name would have been *unity-gain propagation loss*.^{[1]}^{:sec. 5.3.3, p. 256}
Hence frequency dependency of the path loss is caused by the frequency dependency of the receiving antenna's aperture in case the antenna gain is fixed. Antenna aperture in turn determines how well an antenna can pick up power from an incoming electromagnetic wave.

Dependency of antenna aperture from antenna gain is described by the formula:^{[2]}^{:Chap3, p. 22,(3.52)}

This formula represents a well-known fact, that the lower the frequency (the longer the wavelength), the bigger antenna is needed to achieve certain antenna gain. Therefore for a theoretical isotropic antenna (), the received power is described by a formula:

where is a power density of an electromagnetic wave at a location of theoretical isotropic receiving antenna. Note that this is entirely dependent on wavelength, which is how the frequency-dependent behaviour arises.

In simple terms the frequency dependency of the path loss can be explained like this: with the increase of the frequency the requirement to keep the gain of the receiving antenna intact will cause an antenna aperture to be decreased, which will result in less energy being captured with the smaller antenna, which is similar to increasing the path loss in the situation when receiving antenna gain would not have been fixed.

## See also

## Further reading

- C.A. Balanis, "Antenna Theory", 2003, John Wiley and Sons Inc.

## External references

- Derivation of the dB version of the Path Loss Equation
- Propagation Models Chapter on Free Space Propagation
- Path loss Pages for free space and real world - includes free space loss calculator

## References

- ↑
^{1.0}^{1.1}{{#invoke:citation/CS1|citation |CitationClass=book }} - ↑ Template:Cite web