Interdependent networks

The study of interdependent networks is a subfield of network science dealing with phenomena caused by the interactions between complex networks. Though there may be a wide variety of interactions between networks, dependency focuses on the scenario in which the nodes in one network require support from nodes in another network.[1][2][3][4] It has been shown that interdependency between networks explains events such as the 2003 Italy blackout.[5]

Motivation for the model

In nature, networks rarely appear in isolation. They are typically elements in larger systems and can have non-trivial effects on one and other. For example, infrastructure networks exhibit interdependency to a large degree. The power stations which form the nodes of the power grid require fuel delivered via a network of roads or pipes and also control via the communications network. Though the transportation network does not depend on the power network to function, the communications network does. Thus the deactivation of a critical number of nodes in either the power network or the communication network can lead to a series of cascading failures across the system with potentially catastrophic repercussions. If the two networks were treated in isolation, this important feedback effect would not be seen and predictions of network robustness would be greatly overestimated.

Links in a standard network represent connectivity, providing information about how one node can be reached from another. Dependency links represent a need for support from one node to another. This relationship is often, though not necessarily, mutual and thus the links can be directed or undirected. Crucially, a node loses its ability to function as soon as the node it is dependent on ceases to function while it may not be so severely effected by losing a node it is connected to.

In percolation theory, a node is considered active as long as it is connected to the giant component. The introduction of dependency links adds another condition: that the node that it depends on is also active.

Dependency can be defined between different networks[1] and also within the same network.[6]

Percolation properties and phase transitions

Interdependent networks have markedly different percolation properties than single-networks.

If a single network is subjected to random attack ${\displaystyle 1-p}$, the largest connected component decreases continuously with a divergence of its derivative ${\displaystyle {\frac {dP^{\infty }}{dp}}}$ at the percolation threshold ${\displaystyle p_{c}}$, a second-order phase transition. This result is established for ER networks, lattices and other standard topologies.

However, when multiple networks are interdependent, cascading failures emerge due to the positive feedback caused by dependency links. This family of processes causes a discontinuous or first order phase transition. This has been observed for random networks as well as lattices.[6] Furthermore, for embedded interdependent networks the transition is particularly precipitous without even a critical exponent for ${\displaystyle p>p_{c}}$.[7]

Surprisingly, it has been shown that—contrary to the results for single networks—interdependent random networks with broader degree distributions are more vulnerable than those with narrow degree distributions. The high degree which is an asset in single networks can be a liability in interdependent networks. This is because the hubs which increase the robustness in single networks can be dependent on vulnerable low-degree nodes. The removal of the low-degree node then removes the hub and all of its links.[1][3]

A typical cascading failure in a system of interdependent networks can be described as follows:[1] We take two networks ${\displaystyle A}$ and ${\displaystyle B}$ with ${\displaystyle N}$ nodes and a given topology . Each node ${\displaystyle A_{i}}$ in ${\displaystyle A}$ relies on a critical resource provided by a node ${\displaystyle B_{i}}$ in ${\displaystyle B}$ and vice versa. If ${\displaystyle A_{i}}$ stops functioning, ${\displaystyle B_{i}}$ will also stop functioning and vice versa. The failure is triggered by the removal of a fraction ${\displaystyle 1-p}$ of nodes from ${\displaystyle A}$ along with the links in ${\displaystyle A}$ which were attached to each of those nodes. Since every node in ${\displaystyle B}$ depends on a node in ${\displaystyle A}$, this causes the removal of the same fraction ${\displaystyle 1-p}$ of nodes in ${\displaystyle B}$. As in classic network theory, we assume that only nodes which are a part of the largest connected component can continue to function. Since the arrangement of links in ${\displaystyle A}$ and ${\displaystyle B}$ are different, they fragment into different sets of connected components. The smaller components in ${\displaystyle A}$ cease to function and when they do, they cause the same number of nodes (but in different locations) in ${\displaystyle B}$ to cease to function as well. This process continues iteratively between the two networks until no more nodes are removed. This process leads to a percolation phase transition at a value ${\displaystyle p_{c}}$ which is substantially larger than the value obtained for a single network.

Effect of network topology

In interdependent random networks in which a fraction ${\displaystyle q}$ of the nodes in one network are dependent on another, it is found that there is a critical value ${\displaystyle q_{c}}$ above which first-order phase transitions are possible.

In spatially embedded interdependent networks, a new kind of failure has been observed in which a relatively small failure can propagate through space and destroy an entire system of networks.[7]

Comparison to many-particle systems in physics

In statistical physics, phase transitions can only appear in many particle systems. Though phase transitions are well known in network science, in single networks they are second order only. With the introduction of internetwork dependency, first order transitions emerge. This is a new phenomenon and one with profound implications for systems engineering. Where system dissolution takes place after steady (if steep) degradation for second order transitions, the existence of a first order transition implies that the system can go from a relatively healthy state to complete collapse with no advance warning.

Examples of interdependent networks

• Infrastructure networks The network of power stations depends on instructions from the communications network which require power themselves.[8]
• Transportation networks The networks of airports and seaports are interdependent in that in a given city, the ability of that city's airport to function is dependent upon resources obtained from the seaport or vice versa.[9][10]
• Physiological networks The nervous and cardiovascular system are each composed of many connected parts which can be represented as a network. In order to function, they require connectivity within their own network as well as resources available only from the other network.[11]
• Economic/financial networks Availability of credit from the banking network and economic production by the network of commercial firms are interdependent. A bipartite network model of banks and bank assets has recently been used to examine failure propagation in the economy at large.[12]
• Protein networks A biological process regulated by a number of proteins is often represented as a network. Since the same proteins participate in different processes, the networks are interdependent.
• Ecological networks Food webs constructed from species which depend on one and other are interdependent when the same species participates in different webs.[13]
• Climate networks Spatial measurements of different climatological variables define a network. The networks defined by different sets of variables are interdependent.[14]

References

1. {{#invoke:Citation/CS1|citation |CitationClass=journal }}
2. {{#invoke:Citation/CS1|citation |CitationClass=journal }}
3. {{#invoke:Citation/CS1|citation |CitationClass=journal }} Cite error: Invalid <ref> tag; name "GaoBuldyrev2011" defined multiple times with different content
4. {{#invoke:citation/CS1|citation |CitationClass=book }}
5. {{#invoke:Citation/CS1|citation |CitationClass=journal }}
6. {{#invoke:Citation/CS1|citation |CitationClass=journal }} Cite error: Invalid <ref> tag; name "ParshaniBuldyrev2010" defined multiple times with different content
7. {{#invoke:Citation/CS1|citation |CitationClass=journal }}
8. {{#invoke:Citation/CS1|citation |CitationClass=journal }}
9. {{#invoke:Citation/CS1|citation |CitationClass=journal }}
10. {{#invoke:Citation/CS1|citation |CitationClass=journal }}
11. {{#invoke:Citation/CS1|citation |CitationClass=journal }}
12. {{#invoke:Citation/CS1|citation |CitationClass=journal }}
13. {{#invoke:Citation/CS1|citation |CitationClass=journal }}
14. {{#invoke:Citation/CS1|citation |CitationClass=journal }}