# Lagrangian mechanics

Template:Classical mechanics
**Lagrangian mechanics** is a re-formulation of classical mechanics using the principle of stationary action (also called the principle of least action).^{[1]} Lagrangian mechanics applies to systems whether or not they conserve energy or momentum, and it provides conditions under which energy, momentum or both are conserved.^{[2]} It was introduced by the Italian-French mathematician Joseph-Louis Lagrange in 1788.

In Lagrangian mechanics, the trajectory of a system of particles is derived by solving the Lagrange equations in one of two forms, either the **Lagrange equations of the first kind**,^{[3]} which treat constraints explicitly as extra equations, often using Lagrange multipliers;^{[4]}^{[5]} or the **Lagrange equations of the second kind**, which incorporate the constraints directly by judicious choice of generalized coordinates.^{[3]}^{[6]} The fundamental lemma of the calculus of variations shows that solving the Lagrange equations is equivalent to finding the path for which the action functional is stationary, a quantity that is the integral of the Lagrangian over time.

The use of generalized coordinates may considerably simplify a system's analysis. For example, consider a small frictionless bead traveling in a groove. If one is tracking the bead as a particle, calculation of the motion of the bead using Newtonian mechanics would require solving for the time-varying constraint force required to keep the bead in the groove. For the same problem using Lagrangian mechanics, one looks at the path of the groove and chooses a set of *independent* generalized coordinates that completely characterize the possible motion of the bead. This choice eliminates the need for the constraint force to enter into the resultant system of equations. There are fewer equations since one is not directly calculating the influence of the groove on the bead at a given moment.

## Conceptual framework

### Generalized coordinates

#### Concepts and terminology

For one particle acted on by external forces, Newton's second law forms a set of 3 second-order ordinary differential equations, one for each dimension. Therefore, the motion of the particle can be completely described by 6 independent variables: 3 initial position coordinates and 3 initial velocity coordinates. Given these, the general solutions to Newton's second law become particular solutions that determine the time evolution of the particle's behaviour after its initial state (*t* = 0).

The most familiar set of variables for position **r** = (*r _{1}, r_{2}, r_{3}*) and velocity are Cartesian coordinates and their time derivatives (i.e. position (

*x, y, z*) and velocity (

*v*) components). Determining forces in terms of standard coordinates can be complicated, and usually requires much labour.

_{x}, v_{y}, v_{z}An alternative and more efficient approach is to use only as many coordinates as are needed to define the position of the particle, at the same time incorporating the constraints on the system, and writing down kinetic and potential energies. In other words, to determine the number of *degrees of freedom* the particle has, i.e. the number of possible ways the system *can* move subject to the constraints (forces that prevent it moving in certain paths). Energies are much easier to write down and calculate than forces, since energy is a scalar while forces are vectors.

These coordinates are *generalized coordinates*, denoted , and there is one for each degree of freedom. Their corresponding time derivatives are the generalized velocities, . The number of degrees of freedom is usually not equal to the number of spatial dimensions: multi-body systems in 3-dimensional space (such as Barton's Pendulums, planets in the solar system, or atoms in molecules) can have many more degrees of freedom incorporating rotations as well as translations. This contrasts the number of spatial coordinates used with Newton's laws above.

#### Mathematical formulation

The position vector **r** in a standard coordinate system (like Cartesian, spherical etc.), is related to the generalized coordinates by some *transformation equation*:

where there are as many *q _{i}* as needed (number of degrees of freedom in the system). Likewise for velocity and generalized velocities.

For example, for a simple pendulum of length *ℓ*, there is the constraint of the pendulum bob's suspension (rod/wire/string etc.). The position **r** depends on the *x* and *y* coordinates at time *t*, that is, **r**(*t*)=(*x*(*t*),*y*(*t*)), however *x* and *y* are coupled to each other in a constraint equation (if *x* changes *y* must change, and vice versa). A logical choice for a generalized coordinate is the angle of the pendulum from vertical, θ, so we have **r** = (*x*(θ), *y*(θ)) = **r**(θ), in which θ = θ(*t*). Then the transformation equation would be

and so

which corresponds to the one degree of freedom the pendulum has. The term "generalized coordinates" is really a holdover from the period when Cartesian coordinates were the default coordinate system.

In general, from *m* independent generalized coordinates *q _{j}*, the following transformation equations hold for a system composed of n particles:

^{[7]}

^{:260}

where *m* indicates the total number of generalized coordinates. An expression for the virtual displacement (infinitesimal), *δ***r**_{i} of the system for *time-independent constraints* or "velocity-dependent constraints" is the same form as a total differential^{[7]}^{:264}

where *j* is an integer label corresponding to a generalized coordinate.

The generalized coordinates form a discrete set of variables that define the configuration of a system. The continuum analogue for defining a *field* are field variables, say *ϕ*(*r, t*), which represents density function varying with position and time.

### D'Alembert's principle and generalized forces

D'Alembert's principle introduces the concept of virtual work due to applied forces **F**_{i} and inertial forces, acting on a three-dimensional accelerating system of *n* particles whose motion is consistent with its constraints,^{[7]}^{:269}

Mathematically the virtual work done *δW* on a particle of mass *m _{i}* through a virtual displacement

*δ*

**r**

_{i}(consistent with the constraints) is:

where **a**_{i} are the accelerations of the particles in the system and *i* = 1, 2,...,*n* simply labels the particles. In terms of generalized coordinates

this expression suggests that the applied forces may be expressed as generalized forces, *Q _{j}*. Dividing by

*δq*gives the definition of a generalized force:

_{j}^{[7]}

^{:265}

If the forces **F**_{i} are conservative, there is a scalar potential field *V* in which the gradient of *V* is the force:^{[7]}^{:266 & 270}

i.e. generalized forces can be reduced to a potential gradient in terms of generalized coordinates. The previous result may be easier to see by recognizing that *V* is a function of the **r**_{i}, which are in turn functions of *q _{j}*, and then applying the chain rule to the derivative of with respect to

*q*.

_{j}### Kinetic energy relations

The kinetic energy, *T*, for the system of particles is defined by^{[7]}^{:269}

The partial derivatives of *T* with respect to the generalized coordinates *q _{j}* and generalized velocities are:

^{[7]}

^{:269}

Because and are independent variables:

Then:

The total time derivative of this equation is

resulting in:

Newton's laws are contained in it, yet there is no need to find the constraint forces because virtual work and generalized coordinates (which account for constraints) are used. This equation in itself is not actually used in practice, but is a step towards deriving Lagrange's equations (see below).^{[8]}

### Lagrangian and action

The core element of Lagrangian mechanics is the Lagrangian function, which summarizes the dynamics of the entire system in a very simple expression. The physics of analyzing a system is reduced to choosing the most convenient set of generalized coordinates, determining the kinetic and potential energies of the constituents of the system, then writing down the equation for the Lagrangian to use in Lagrange's equations. It is defined by ^{[9]}

where *T* is the total kinetic energy and *V* is the total potential energy of the system.

The next fundamental element is the action , defined as the time integral of the Lagrangian:^{[8]}

This also contains the dynamics of the system, and has deep theoretical implications (discussed below). Technically, the action is a *functional*, that is, it is a *function* that maps the full Lagrangian function for all times between *t*_{1} and *t*_{2} to a scalar value for the action. Its dimensions are the same as angular momentum.

In classical field theory, the physical system is not a set of discrete particles, but rather a continuous field defined over a region of 3d space. Associated with the field is a Lagrangian density defined in terms of the field and its derivatives at a location . The total Lagrangian is then the integral of the Lagrangian density over 3d space (see volume integral):

where d^{3}**r** is a 3d differential volume element, must be used instead. The action becomes an integral over space and time:

### Hamilton's principle of stationary action

Let *q*_{0} and *q*_{1} be the coordinates at respective initial and final times *t*_{0} and *t*_{1}. Using the calculus of variations, it can be shown that Lagrange's equations are equivalent to *Hamilton's principle*:

*The trajectory of the system between t*_{0}and t_{1}has a**stationary action**S.

By *stationary*, we mean that the action does not vary to first-order from infinitesimal deformations of the trajectory, with the end-points (*q*_{0}, *t*_{0}) and (*q*_{1},*t*_{1}) fixed. Hamilton's principle can be written as:

Thus, instead of thinking about particles accelerating in response to applied forces, one might think of them picking out the path with a stationary action.

Hamilton's principle is sometimes referred to as the *principle of least action*, however the action functional need only be *stationary*, not necessarily a maximum or a minimum value. Any variation of the functional gives an increase in the functional integral of the action.

We can use this principle instead of Newton's Laws as the fundamental principle of mechanics, this allows us to use an integral principle (Newton's Laws are based on differential equations so they are a differential principle) as the basis for mechanics. However it is not widely stated that Hamilton's principle is a variational principle only with holonomic constraints, if we are dealing with nonholonomic systems then the variational principle should be replaced with one involving d'Alembert principle of virtual work. Working only with holonomic constraints is the price we have to pay for using an elegant variational formulation of mechanics.

## Lagrange equations of the first kind

Lagrange introduced an analytical method for finding stationary points using the method of Lagrange multipliers, and also applied it to mechanics.

For a system subject to the (holonomic) constraint equation on the generalized coordinates:

where *A* is a constant, then **Lagrange's equations of the first kind** are:

where *λ* is the Lagrange multiplier. By analogy with the mathematical procedure, we can write:

where

denotes the variational derivative.

For *e* constraint equations *F*_{1}, *F*_{2},..., *F _{e}*, there is a Lagrange multiplier for each constraint equation, and Lagrange's equations of the first kind generalize to:

This procedure does increase the number of equations, but there are enough to solve for all of the multipliers. The number of equations generated is the number of constraint equations plus the number of coordinates, i.e. *e* + *m*. The advantage of the method is that (potentially complicated) substitution and elimination of variables linked by constraint equations can be bypassed.

There is a connection between the constraint equations *F _{j}* and the constraint forces

*N*acting in the conservative system (forces are conservative):

_{j}which is derived below.

Derivation of connection between constraint equations and forces The generalized constraint forces are given by (using the definition of generalized force above): and using the kinetic energy equation of motion (blue box above):

For conservative systems (see below)

so

and

equating leads to

and finally equating to Lagrange's equations of the first kind implies:

So each constraint equation corresponds to a constraint force (in a conservative system).

## Lagrange equations of the second kind

### Euler–Lagrange equations

For any system with *m* degrees of freedom, the Lagrange equations include *m* generalized coordinates and *m* generalized velocities. Below, we sketch out the derivation of the Lagrange equations of the second kind. In this context, *V* is used rather than *U* for potential energy and *T* replaces *K* for kinetic energy. See the references for more detailed and more general derivations.

The equations of motion in Lagrangian mechanics are the **Lagrange equations of the second kind**, also known as the **Euler–Lagrange equations**:^{[8]}^{[10]}

where *j* = 1, 2,...*m* represents the *j*th degree of freedom, *q _{j}* are the generalized coordinates, and are the generalized velocities.

Although the mathematics required for Lagrange's equations appears significantly more complicated than Newton's laws, this does point to deeper insights into classical mechanics than Newton's laws alone: in particular, symmetry and conservation. In practice it's often easier to solve a problem using the Lagrange equations than Newton's laws, because the minimum generalized coordinates *q*_{i} can be chosen by convenience to exploit symmetries in the system, and constraint forces are incorporated into the geometry of the problem. There is one Lagrange equation for each generalized coordinate *q _{i}*.

For a system of many particles, each particle can have different numbers of degrees of freedom from the others. In each of the Lagrange equations, *T* is the *total* kinetic energy of the system, and *V* the *total* potential energy.

### Derivation of Lagrange's equations

#### Hamilton's principle

The Euler–Lagrange equations follow directly from Hamilton's principle, and are mathematically equivalent. From the calculus of variations, any functional of the form:

leads to the general Euler–Lagrange equation for stationary value of J. (see main article for derivation):

Then making the replacements:

yields the Lagrange equations for mechanics. Since mathematically Hamilton's equations can be derived from Lagrange's equations (by a Legendre transformation) and Lagrange's equations can be derived from Newton's laws, all of which are equivalent and summarize classical mechanics, this means classical mechanics is fundamentally ruled by a variation principle (Hamilton's principle above).

#### Generalized forces

For a conservative system, since the potential field is only a function of position, not velocity, Lagrange's equations also follow directly from the equation of motion above:

simplifying to

This is consistent with the results derived above and may be seen by differentiating the right side of the Lagrangian with respect to and time, and solely with respect to *q _{j}*, adding the results and associating terms with the equations for

**F**

_{i}and

*Q*.

_{j}#### Newton's laws

As the following derivation shows, *no new physics* is introduced, so the Lagrange equations can describe the dynamics of a classical system equivalently as Newton's laws.

Derivation of Lagrange's equations from Newton's 2nd law and D'Alembert's principle - Force and work done (on the particle)

Consider a single particle with mass

*m*and position vector**r**, moving under an applied conservative force**F**, which can be expressed as the gradient of a scalar potential energy function*V*(**r**, t):Such a force is independent of third- or higher-order derivatives of

**r**.Consider an arbitrary displacement

*δ***r**of the particle. The work done by the applied force**F**isUsing Newton's second law:

Since work is a physical scalar quantity, we should be able to rewrite this equation in terms of the generalized coordinates and velocities. On the left hand side,

On the right hand side, carrying out a change of coordinates to generalized coordinates, we obtain:

Now integrating by parts the summand with respect to

*t*, then differentiating with respect to*t*:allows the sum to be written as:

Recognizing that

we obtain:

- Kinetic and potential energy

Now, by changing the order of differentiation, we obtain:

Finally, we change the order of summation:

Which is equivalent to:

where

*T*is total kinetic energy of the system.- Applying D'Alembert's principle

The equation for the work done becomes

However, this must be true for

*any*set of generalized displacements*δq*, so we must have_{i}for

*each*generalized coordinate*δq*. We can further simplify this by noting that_{i}*V*is a function solely of**r**and*t*, and**r**is a function of the generalized coordinates and*t*. Therefore,*V*is independent of the generalized velocities:Inserting this into the preceding equation and substituting

*L*=*T*−*V*, called the Lagrangian, we obtain Lagrange's equations:

When *q*_{i} = *r*_{i} (i.e. the generalized coordinates are simply the Cartesian coordinates), it is straightforward to check that Lagrange's equations reduce to Newton's second law.

### Dissipation function

{{#invoke:main|main}}
In a more general formulation, the forces could be both potential and viscous. If an appropriate transformation can be found from the **F**_{i}, Rayleigh suggests using a dissipation function, *D*, of the following form:^{[7]}^{:271}

where *C _{jk}* are constants that are related to the damping coefficients in the physical system, though not necessarily equal to them

If *D* is defined this way, then^{[7]}^{:271}

and

### Examples

In this section two examples are provided in which the above concepts are applied. The first example establishes that in a simple case, the Newtonian approach and the Lagrangian formalism agree. The second case illustrates the power of the above formalism, in a case that is hard to solve with Newton's laws.

#### Falling mass

Consider a point mass *m* falling freely from rest. By gravity a force *F* = *mg* is exerted on the mass (assuming *g* constant during the motion). Filling in the force in Newton's law, we find from which the solution

follows (by taking the antiderivative of the antiderivative, and choosing the origin as the starting point). This result can also be derived through the Lagrangian formalism. Take *x* to be the coordinate, which is *0* at the starting point. The kinetic energy is *T* = Template:Frac*mv*^{2} and the potential energy is *V* = −*mgx*; hence,

Then

which can be rewritten as , yielding the same result as earlier.

#### Pendulum on a movable support

Consider a pendulum of mass *m* and length *ℓ*, which is attached to a support with mass *M*, which can move along a line in the *x*-direction. Let *x* be the coordinate along the line of the support, and let us denote the position of the pendulum by the angle *θ* from the vertical.

The kinetic energy can then be shown to be

and the potential energy of the system is

The Lagrangian is therefore

Now carrying out the differentiations gives for the support coordinate *x*

therefore:

indicating the presence of a constant of motion. Performing the same procedure for the variable yields:

therefore

These equations may look quite complicated, but finding them with Newton's laws would have required carefully identifying all forces, which would have been much more laborious and prone to errors. By considering limit cases, the correctness of this system can be verified: For example, should give the equations of motion for a pendulum that is at rest in some inertial frame, while should give the equations for a pendulum in a constantly accelerating system, etc. Furthermore, it is trivial to obtain the results numerically, given suitable starting conditions and a chosen time step, by stepping through the results iteratively.

#### Two-body central force problem

The basic problem is that of two bodies in orbit about each other attracted by a central force. The Jacobi coordinates are introduced; namely, the location of the center of mass **R** and the separation of the bodies **r** (the relative position). The Lagrangian is then^{[11]}^{[12]}

where *M* is the total mass, *μ* is the reduced mass, and *U* the potential of the radial force. The Lagrangian is divided into a *center-of-mass* term and a *relative motion* term. The **R** equation from the Euler–Lagrange system is simply:

resulting in simple motion of the center of mass in a straight line at constant velocity. The relative motion is expressed in polar coordinates (*r*, *θ*):

which does not depend upon *θ*, therefore an *ignorable* coordinate. The Lagrange equation for *θ* is then:

where *ℓ* is the conserved angular momentum. The Lagrange equation for *r* is:

or:

This equation is identical to the radial equation obtained using Newton's laws in a *co-rotating* reference frame, that is, a frame rotating with the reduced mass so it appears stationary. If the angular velocity is replaced by its value in terms of the angular momentum,

the radial equation becomes:^{[13]}

which is the equation of motion for a one-dimensional problem in which a particle of mass *μ* is subjected to the inward central force −d*U*/d*r* and a second outward force, called in this context the centrifugal force:

Of course, if one remains entirely within the one-dimensional formulation, *ℓ* enters only as some imposed parameter of the external outward force, and its interpretation as angular momentum depends upon the more general two-dimensional problem from which the one-dimensional problem originated.

If one arrives at this equation using Newtonian mechanics in a co-rotating frame, the interpretation is evident as the centrifugal force in that frame due to the rotation of the frame itself. If one arrives at this equation directly by using the generalized coordinates (*r*, *θ*) and simply following the Lagrangian formulation without thinking about frames at all, the interpretation is that the centrifugal force is an outgrowth of *using polar coordinates*. As Hildebrand says:^{[14]} "Since such quantities are not true physical forces, they are often called *inertia forces*. Their presence or absence depends, not upon the particular problem at hand, but *upon the coordinate system chosen*." In particular, if Cartesian coordinates are chosen, the centrifugal force disappears, and the formulation involves only the central force itself, which provides the centripetal force for a curved motion.

This viewpoint, that fictitious forces originate in the choice of coordinates, often is expressed by users of the Lagrangian method. This view arises naturally in the Lagrangian approach, because the frame of reference is (possibly unconsciously) selected by the choice of coordinates.^{[15]} Unfortunately, this usage of "inertial force" conflicts with the Newtonian idea of an inertial force. In the Newtonian view, an inertial force originates in the acceleration of the frame of observation (the fact that it is not an inertial frame of reference), not in the choice of coordinate system. To keep matters clear, it is safest to refer to the Lagrangian inertial forces as *generalized* inertial forces, to distinguish them from the Newtonian vector inertial forces. That is, one should avoid following Hildebrand when he says (p. 155) "we deal *always* with *generalized* forces, velocities accelerations, and momenta. For brevity, the adjective "generalized" will be omitted frequently."

It is known that the Lagrangian of a system is not unique. Within the Lagrangian formalism the Newtonian fictitious forces can be identified by the existence of alternative Lagrangians in which the fictitious forces disappear, sometimes found by exploiting the symmetry of the system.^{[16]}

## Extensions of Lagrangian mechanics

The Hamiltonian, denoted by *H*, is obtained by performing a Legendre transformation on the Lagrangian, which introduces new variables, canonically conjugate to the original variables. This doubles the number of variables, but makes differential equations first order. The Hamiltonian is the basis for an alternative formulation of classical mechanics known as Hamiltonian mechanics. It is a particularly ubiquitous quantity in quantum mechanics (see Hamiltonian (quantum mechanics)).

In 1948, Feynman discovered the path integral formulation extending the principle of least action to quantum mechanics for electrons and photons. In this formulation, particles travel every possible path between the initial and final states; the probability of a specific final state is obtained by summing over all possible trajectories leading to it. In the classical regime, the path integral formulation cleanly reproduces Hamilton's principle, and Fermat's principle in optics.

Dissipation (i.e. non-conservative systems) can also be treated with an effective Lagrangian formulated by a certain doubling of the degrees of freedom; see.^{[17]}^{[18]}^{[19]}^{[20]}

## See also

- Canonical coordinates
- Functional derivative
- Generalized coordinates
- Hamiltonian mechanics
- Hamiltonian optics
- Lagrangian analysis (applications of Lagrangian mechanics)
- Lagrangian point
- Non-autonomous mechanics
- Restricted three-body problem

## References

- ↑ {{#invoke:citation/CS1|citation |CitationClass=book }}
- ↑ {{#invoke:citation/CS1|citation |CitationClass=book }}
- ↑
^{3.0}^{3.1}{{#invoke:citation/CS1|citation |CitationClass=book }} - ↑ {{#invoke:citation/CS1|citation |CitationClass=book }}
- ↑ {{#invoke:citation/CS1|citation |CitationClass=book }}
- ↑ {{#invoke:citation/CS1|citation |CitationClass=book }}
- ↑
^{7.0}^{7.1}^{7.2}^{7.3}^{7.4}^{7.5}^{7.6}^{7.7}^{7.8}{{#invoke:citation/CS1|citation |CitationClass=book }} - ↑
^{8.0}^{8.1}^{8.2}Analytical Mechanics, L.N. Hand, J.D. Finch, Cambridge University Press, 2008, ISBN 978-0-521-57572-0 - ↑ Torby1984, p.270
- ↑ The Road to Reality, Roger Penrose, Vintage books, 2007, ISBN 0-679-77631-1
- ↑ {{#invoke:citation/CS1|citation |CitationClass=book }}
- ↑ The Lagrangian also can be written explicitly for a rotating frame. See {{#invoke:citation/CS1|citation |CitationClass=book }}
- ↑ {{#invoke:citation/CS1|citation |CitationClass=book }}
- ↑ {{#invoke:citation/CS1|citation |CitationClass=book }}
- ↑ For example, see {{#invoke:citation/CS1|citation |CitationClass=book }} for a comparison of Lagrangians in an inertial and in a noninertial frame of reference. See also the discussion of "total" and "updated" Lagrangian formulations in {{#invoke:citation/CS1|citation |CitationClass=book }}
- ↑ {{#invoke:citation/CS1|citation |CitationClass=book }}
- ↑ B. P. Kosyakov, "Introduction to the classical theory of particles and fields", Berlin, Germany: Springer (2007)
- ↑ "Classical Mechanics of Nonconservative Systems" by Chad Galley
- ↑ "Radiation reaction at the level of the action" by Ofek Birnholtz, Shahar Hadar, and Barak Kol
- ↑ "Theory of post-Newtonian radiation and reaction" by Ofek Birnholtz, Shahar Hadar, and Barak Kol

## Further reading

- Landau, L.D. and Lifshitz, E.M.
*Mechanics*, Pergamon Press. - Gupta, Kiran Chandra,
*Classical mechanics of particles and rigid bodies*(Wiley, 1988). - Goldstein, Herbert,
*Classical Mechanics*, Addison Wesley. - Cassel, Kevin W.: Variational Methods with Applications in Science and Engineering, Cambridge University Press, 2013.

## External links

- Tong, David, Classical Dynamics Cambridge lecture notes
- Principle of least action interactive Excellent interactive explanation/webpage
- Joseph Louis de Lagrange - Œuvres complètes (Gallica-Math)