# Vacuum permeability

{{#invoke:Hatnote|hatnote}}

The physical constant *μ*_{0}, commonly called the **vacuum permeability**, **permeability of free space**, or **magnetic constant** is an ideal, (baseline) physical constant, which is the value of magnetic permeability in a classical vacuum. *Vacuum permeability* is derived from production of a magnetic field by an electric current or by a moving electric charge and in all other formulas for magnetic-field production in a vacuum. In the reference medium of classical vacuum, *µ*_{0} has an exact defined value:^{[1]}^{[2]}

*µ*_{0}= Template:Val V·s/(A·m) ≈ Template:Val or N·A^{−2}or T·m/A or Wb/(A·m)

in the SI system of units.

As a constant, it can also be defined as a fundamental invariant quantity, and is also one of three components that defines free space through Maxwell's equations. In classical physics, *free space* is a concept of electromagnetic theory, corresponding to a theoretically perfect vacuum and sometimes referred to as the **vacuum of free space**, or as **classical vacuum**, and is appropriately viewed as a *reference* medium.^{[3]}^{[4]}

## The ampere defines vacuum permeability

The ampere is that constant current which, if maintained in two straight parallel conductors of infinite length, of negligible circular cross section, and placed 1 meter apart in vacuum, would produce between these conductors a force equal to Template:Val newton per meter of length.

Adopted in 1948, the effect of this definition is to fix the magnetic constant (permeability of vacuum) at exactly Template:Val.^{[5]} To further illustrate:

Two thin, straight, stationary, parallel wires, a distance *r* apart in free space, each carrying a current *I*, will exert a force on each other. Ampère's force law states that the force per unit length is given by^{[6]}

The ampere is defined so that if the wires are 1 m apart and the current in each wire is 1 A, the force between the two wires is Template:Val.
Hence the value of *μ*_{0} is *defined* to be exactly

## Terminology

Historically, the constant *μ*_{0} has had different names. In the 1987 IUPAP Red book, for example, this constant was still called *permeability of vacuum*.^{[9]} Another, now rather rare and obsolete, term is "*magnetic permittivity of vacuum*". See, for example, Servant *et al.*^{[10]}
The term "vacuum permeability" (and variations thereof, such as "permeability of free space") remains very widespread. However, Standards Organizations have recently moved to **magnetic constant** as the preferred name for *μ*_{0}, although the older name continues to be listed as a synonym.^{[8]}

The name "magnetic constant" is used by standards organizations in order to avoid use of the terms "permeability" and "vacuum", which have physical meanings. This change of preferred name has been made because *μ*_{0} is a defined value, and is not the result of experimental measurement (see below).

## Systems of units and historical origin of value of *μ*_{0}

In principle, there are several equation systems that could be used to set up a system of electrical quantities and units.^{[11]}
Since the late 19th century, the fundamental definitions of current units have been related to the definitions of mass, length and time units, using Ampère's force law. However, the precise way in which this has "officially" been done has changed many times, as measurement techniques and thinking on the topic developed.
The overall history of the unit of electric current, and of the related question of how to define a set of equations for describing electromagnetic phenomena, is very complicated. Briefly, the basic reason why *μ*_{0} has the value it does is as follows.

Ampère's force law describes the experimentally-derived fact that, for two thin, straight, stationary, parallel wires, a distance *r* apart, in each of which a current *I* flows, the force per unit length, *F*_{m}, that one wire exerts upon the other in the vacuum of free space would be given by

Writing the constant of proportionality as *k*_{m} gives

The form of *k*_{m} needs to be chosen in order to set up a system of equations, and a value then needs to be allocated in order to define the unit of current.

In the old "electromagnetic (emu)" system of equations defined in the late 1800s, *k*_{m} was chosen to be a pure number, 2, distance was measured in centimetres, force was measured in the cgs unit dyne, and the currents defined by this equation were measured in the "electromagnetic unit (emu) of current" (also called the "abampere"). A practical unit to be used by electricians and engineers, the ampere, was then defined as equal to one tenth of the electromagnetic unit of current.

In another system, the "rationalized-metre-kilogram-second (rmks) system" (or alternatively the "metre-kilogram-second-ampere (mksa) system"), *k*_{m} is written as *μ*_{0}/2π, where *μ*_{0} is a measurement-system constant called the "magnetic constant".^{[12]}
The value of *μ*_{0} was chosen such that the rmks unit of current is equal in size to the ampere in the emu system: *μ*_{0} is *defined* to be 4π × 10^{−7} N A^{−2}.^{[5]}

Historically, several different systems (including the two described above) were in use simultaneously. In particular, physicists and engineers used different systems, and physicists used three different systems for different parts of physics theory and a fourth different system (the engineers' system) for laboratory experiments. In 1948, international decisions were made by standards organizations to adopt the rmks system, and its related set of electrical quantities and units, as the single main international system for describing electromagnetic phenomena in the International System of Units.

Ampère's law as stated above describes a physical property of the world. However, the choices about the form of *k*_{m} and the value of *μ*_{0} are totally human decisions, taken by international bodies composed of representatives of the national standards organizations of all participating countries. The parameter *μ*_{0} is a measurement-system constant, not a physical constant that can be measured. It does not, in any meaningful sense, describe a physical property of the vacuum.^{[13]} This is why the relevant Standards Organizations prefer the name "magnetic constant", rather than any name that carries the hidden and misleading implication that *μ*_{0} describes some physical property{{ safesubst:#invoke:Unsubst||date=__DATE__ |$B=
{{#invoke:Category handler|main}}{{#invoke:Category handler|main}}^{[citation needed]}
}}.

## Significance in electromagnetism

The magnetic constant *μ*_{0} appears in Maxwell's equations, which describe the properties of electric and magnetic fields and electromagnetic radiation, and relate them to their sources. In particular, it appears in relationship to quantities such as permeability and magnetization density, such as the relationship that defines the magnetic * H*-field in terms of the magnetic

*-field. In real media, this relationship has the form:*

**B**where * M* is the magnetization density. In vacuum,

*= 0.*

**M**In SI units, the speed of light in vacuum, *c*_{0} is related to the magnetic constant and the electric constant (vacuum permittivity), *ε*_{0}, by the definition:

This relation can be derived using Maxwell's equations of classical electromagnetism in the medium of classical vacuum, but this relation is used by BIPM and NIST as a *definition* of ε_{0} in terms of the defined numerical values for c_{0} and μ_{0}, and is *not* presented as a derived result contingent upon the validity of Maxwell's equations.^{[14]}

## See also

- Characteristic impedance of vacuum
- Electromagnetic wave equation
- Sinusoidal plane-wave solutions of the electromagnetic wave equation
- Mathematical descriptions of the electromagnetic field
- New SI definitions

## References and notes

- ↑ Template:Cite web
- ↑ Rosen, Joe. "Permeability (Physics)." Encyclopedia of Physics. New York: Facts On File, Inc., 2004. Science Online. Facts On File, Inc. http://www.fofweb.com/Science/default.asp?ItemID=WE40 (accessed 2010-02-04)
- ↑ Template:Cite web
- ↑ {{#invoke:citation/CS1|citation |CitationClass=book }}
- ↑
^{5.0}^{5.1}This choice defines the SI unit of current, the ampere: Template:Cite web - ↑ See for example {{#invoke:citation/CS1|citation |CitationClass=book }}Equation 25-14
- ↑ Template:Cite web
- ↑
^{8.0}^{8.1}Template:Cite web - ↑ {{#invoke:citation/CS1|citation |CitationClass=book }}; (the IUPAP "Red book").
- ↑ {{#invoke:citation/CS1|citation |CitationClass=book }}
- ↑ For an introduction to the subject of choices for independent units, see {{#invoke:citation/CS1|citation |CitationClass=book }}
- ↑ The decision to explicitly include the factor of 2π in
*k*_{m}stems from the "rationalization" of the equations used to describe physical electromagnetic phenomena. - ↑ The magnetic permeability of a realizable vacuum (such as outer space, or ultra-high vacuum), which is
*measurable*at least in principle, is distinct from the*defined*parameter*μ*_{0}.{{ safesubst:#invoke:Unsubst||date=__DATE__ |$B= {{#invoke:Category handler|main}}{{#invoke:Category handler|main}}^{[citation needed]}}} - ↑
The exact numerical value is found at:
Template:Cite web This formula determining the exact value of
*ε*_{0}is found in Table 1, p. 637 of {{#invoke:Citation/CS1|citation |CitationClass=journal }}

el:Μαγνητική σταθερά it:Permeabilità magnetica uk:Магнітна константа