Hilbert–Schmidt operator

From formulasearchengine
Revision as of 04:24, 10 January 2014 by en>Mgkrupa (References: Added {{Functional Analysis}} footer)
Jump to navigation Jump to search

The spectrum of a linear operator T that operates on a Banach space X (a fundamental concept of functional analysis) consists of all scalars λ such that the operator Tλ does not have a bounded inverse on X. The spectrum has a standard decomposition into three parts:

  • a point spectrum, consisting of the eigenvalues of T
  • a continuous spectrum, consisting of the scalars that are not eigenvalues but make the range of Tλ a proper dense subset of the space;
  • a residual spectrum, consisting of all other scalars in the spectrum

This decomposition is relevant to the study of differential equations, and has applications to many branches of science and engineering. A well-known example from quantum mechanics is the explanation for the discrete spectral lines and the continuous band in the light emitted by excited atoms of hydrogen.

Definitions

For bounded Banach space operators

Let X be a Banach space, L(X) the family of bounded operators on X, and T ∈ L(X). By definition, a complex number λ is in the spectrum of T, denoted σ(T), if T − λ does not have an inverse in L(X).

If T − λ is one-to-one and onto, then its inverse is bounded; this follows directly from the open mapping theorem of functional analysis. So, λ is in the spectrum of T if and only if T − λ is either not one-to-one or not onto. One distinguishes three separate cases:

  1. T − λ is not injective. That is, there exist two distinct elements x,y in X such that (T − λ)(x) = (T − λ)(y). Then z = x − y is a non-zero vector such that T(z) = λz. In other words, λ is an eigenvalue of T in the sense of linear algebra. In this case, λ is said to be in the point spectrum of T, denoted σp(T).
  2. T − λ is injective, and its range is a dense subset R of X; but is not the whole of X. In other words, there exists some element x in X such that (T − λ)(y) can be as close to x as desired, with y in X; but is never equal to x. It can be proved that, in this case, T − λ is not bounded below (i.e. it sends far apart elements of X too close together). Equivalently, the inverse linear operator (T − λ)−1, which is defined on the dense subset R, is not a bounded operator, and therefore cannot be extended to the whole of X. Then λ is said to be in the continuous spectrum, σc(T), of T.
  3. T − λ is injective but does not have dense range. That is, there is some element x in X and a neighborhood N of x such that (T − λ)(y) is never in N. In this case, the map (T − λ) xx may be bounded or unbounded, but in any case does not admit a unique extension to a bounded linear map on all of X. Then λ is said to be in the residual spectrum of T, σr(T).

So σ(T) is the disjoint union of these three sets,

σ(T)=σp(T)σc(T)σr(T).

Spectrum of dual operator

If X* is the dual space of X, and T* : X*X* is the adjoint operator of T, then σ(T) = σ(T*).

Theorem For a bounded operator T, σr(T) ⊂ σp(T*) ⊂ σr(T) ∪ σp(T).

Proof The notation <·, φ> will denote an element of X*, i.e. x → <x, φ> is the action of a bounded linear functional φ. Let λ ∈ σr(T). So Ran(T - λ) is not dense in X. By the Hahn–Banach theorem, there exists a non-zero φX* that vanishes on Ran(T - λ). For all xX,

(Tλ)x,φ=x,(T*λ)φ=0.

Therefore (T* - λ)φ = 0 ∈ X* and λ is an eigenvalue of T*. The shows the former inclusion. Next suppose that (T* - λ)φ = 0 where φ ≠ 0, i.e.

xX,x,(T*λ)φ=(Tλ)x,φ=0.

If Ran(T − λ) is dense, then φ must be the zero functional, a contradiction. The claim is proved.

In particular, when X is a reflexive Banach space, σr(T*) ⊂ σp(T**) = σp(T).

For unbounded operators

The spectrum of an unbounded operator can be divided into three parts in exactly the same way as in the bounded case.

Examples

Multiplication operator

Given a σ-finite measure space (S, Σ, μ), consider the Banach space Lp(μ). A function h: SC is called essentially bounded if h is bounded μ-almost everywhere. An essentially bounded h induces a bounded multiplication operator Th on Lp(μ):

(Thf)(s)=h(s)f(s).

The operator norm of T is the essential supremum of h. The essential range of h is defined in the following way: a complex number λ is in the essential range of h if for all ε > 0, the preimage of the open ball Bε(λ) under h has strictly positive measure. We will show first that σ(Th) coincides with the essential range of h and then examine its various parts.

If λ is not in the essential range of h, take ε > 0 such that h−1(Bε(λ)) has zero measure. The function g(s) = 1/(h(s) − λ) is bounded almost everywhere by 1/ε. The multiplication operator Tg satisfies Tg · Th − λ = Th − λ · Tg = I. So λ does not lie in spectrum of Th. On the other hand, if λ lies in the essential range of h, consider the sequence of sets {Sn = h−1(B1/n(λ))}. Each Sn has positive measure. Let fn be the characteristic function of Sn. We can compute directly

(Thλ)fnpp=(hλ)fnpp=Sn|hλ|pdμ1npμ(Sn)=1npfnpp.

This shows Th − λ is not bounded below, therefore not invertible.

If λ is such that μ( h−1({λ})) > 0, then λ lies in the point spectrum of Th: Pick an open ball Bε(λ) that contains only λ from the essential range. Let f be the characteristic function of h−1(Bε(λ)), then

sS,(Thf)(s)=λf(s).

Any λ in the essential range of h that does not have a positive measure preimage is in the continuous spectrum or in the resolvent spectrum of Th. To show this is to show that Th − λ has dense range for all such λ. Given fLp(μ), again we consider the sequence of sets {Sn = h−1(B1/n(λ))}. Let gn be the characteristic function of S − Sn. Define

fn(s)=1h(s)λgn(s)f(s).

Direct calculation shows that fnLp(μ), and, by the dominated convergence theorem,

(Thλ)fnf

in the Lp(μ) norm.

Therefore multiplication operators have no residual spectrum. In particular, by the spectral theorem, normal operators on a Hilbert space have no residual spectrum.

Shifts

In the special case when S is the set of natural numbers and μ is the counting measure, the corresponding Lp(μ) is denoted by lp. This space consists of complex valued sequences {xn} such that

n0|xn|p<.

For 1 < p < ∞, l p is reflexive. Define the left shift T : l pl p by

T(x1,x2,x3,)=(x2,x3,x4,).

T is a partial isometry with operator norm 1. So σ(T) lies in the closed unit disk of the complex plane.

T* is the right shift (or unilateral shift), which is an isometry, on l q where 1/p + 1/q = 1:

T*(x1,x2,x3,)=(0,x1,x2,).

For λC with |λ| < 1,

x=(1,λ,λ2,)lp

and T x = λ x. Consequently the point spectrum of T contains the open unit disk. Invoking reflexivity and the theorem given above, we can deduce that the open unit disk lies in the residual spectrum of T*.

The spectrum of a bounded operator is closed, which implies the unit circle, { |λ| = 1 } ⊂ C, is in σ(T). Also, T* has no eigenvalues, i.e. σp(T*) is empty. Again by reflexivity of l p and the theorem given above, we have that σr(T) is also empty. Therefore, for a complex number λ with unit norm, one must have λσp(T) or λσc(T). Now if |λ| = 1 and

Tx=λx,i.e.(x2,x3,x4,)=λ(x1,x2,x3,),

then

x=x1(1,λ,λ2,),

which can not be in l p, a contradiction. This means the unit circle must be the continuous spectrum of T.

For the right shift T*, σr(T*) is the open unit disk and σc(T*) is the unit circle.

For p = 1, one can perform a similar analysis. The results will not be exactly the same, since reflexivity no longer holds.

Self adjoint operators on Hilbert space

Hilbert spaces are Banach spaces, so the above discussion applies to bounded operators on Hilbert spaces as well, although possible differences may arise from the adjoint operation on operators. For example, let H be a Hilbert space and TL(H), σ(T*) is not σ(T) but rather its image under complex conjugation.

For a self adjoint TL(H), the Borel functional calculus gives additional ways to break up the spectrum naturally.

Borel functional calculus

Template:Further2

This subsection briefly sketches the development of this calculus. The idea is to first establish the continuous functional calculus then pass to measurable functions via the Riesz-Markov representation theorem. For the continuous functional calculus, the key ingredients are the following:

1. If T is self adjoint, then for any polynomial P, the operator norm
P(T)=supλσ(T)|P(λ)|.
2. The Stone-Weierstrass theorem, which gives that the family of polynomials (with complex coefficients), is dense in C(σ(T)), the continuous functions on σ(T).

The family C(σ(T)) is a Banach algebra when endowed with the uniform norm. So the mapping

PP(T)

is an isometric homomorphism from a dense subset of C(σ(T)) to L(H). Extending the mapping by continuity gives f(T) for f ∈ C(σ(T)): let Pn be polynomials such that Pnf uniformly and define f(T) = lim Pn(T). This is the continuous functional calculus.

For a fixed hH, we notice that

fh,f(T)h

is a positive linear functional on C(σ(T)). According to the Riesz-Markov representation theorem that there exists a unique measure μh on σ(T) such that

σ(T)fdμh=h,f(T)h.

This measure is sometimes called the spectral measure associated to h. The spectral measures can be used to extend the continuous functional calculus to bounded Borel functions. For a bounded function g that is Borel measurable, define, for a proposed g(T)

σ(T)gdμh=h,g(T)h.

Via the polarization identity, one can recover (since H is assumed to be complex)

k,g(T)h.

and therefore g(T) h for arbitrary h.

In the present context, the spectral measures, combined with a result from measure theory, give a decomposition of σ(T).

Decomposing the spectrum

Let hH and μh be its corresponding spectral measure on σ(T) ⊂ R. According to a refinement of Lebesgue's decomposition theorem, μh can be decomposed into three mutually singular parts:

μ=μac+μsc+μpp

where μac is absolutely continuous with respect to the Lebesgue measure, and μsc is singular with respect to the Lebesgue measure, and μpp is a pure point measure.

All three types of measures are invariant under linear operations. Let Hac be the subspace consisting of vectors whose spectral measures are absolutely continuous with respect to the Lebesgue measure. Define Hpp and Hsc in analogous fashion. These subspaces are invariant under T. For example, if hHac and k = T h. Let χ be the characteristic function of some Borel set in σ(T), then

k,χ(T)k=σ(T)χ(λ)λ2dμh(λ)=σ(T)χ(λ)dμk(λ).

So

λ2dμh=dμk

and kHac. Furthermore, applying the spectral theorem gives

H=HacHscHpp.

This leads to the following definitions:

  1. The spectrum of T restricted to Hac is called the absolutely continuous spectrum of T, σac(T).
  2. The spectrum of T restricted to Hsc is called its singular spectrum, σsc(T).
  3. The set of eigenvalues of T are called the pure point spectrum of T, σpp(T).

The closure of the eigenvalues is the spectrum of T restricted to Hpp. So

σ(T)=σac(T)σsc(T)σ¯pp(T).

Comparison

A bounded self adjoint operator on Hilbert space is a bounded operator on a Banach space.

Unlike the Banach space formulation, the union

σ(T)=σ¯pp(T)σac(T)σsc(T).

need not be disjoint. It is disjoint when the operator T is of uniform multiplicity, say m, i.e. if T is unitarily equivalent to multiplication by λ on the direct sum

i=1mL2(,μi)

for some Borel measures μi. When more than one measure appears in the above expression, we see that it is possible for the union of the three types of spectra to not be disjoint. If λσac(T) ∩ σpp(T), λ is sometimes called an eigenvalue embedded in the absolutely continuous spectrum.

When T is unitarily equivalent to multiplication by λ on

L2(,μ),

the decomposition of σ(T) from Borel functional calculus is a refinement of the Banach space case.

Physics

The preceding comments can be extended to the unbounded self-adjoint operators since Riesz-Markov holds for locally compact Hausdorff spaces.

In quantum mechanics, observables are, not necessarily bounded, self adjoint operators and their spectra are the possible outcomes of measurements. Absolutely continuous spectrum of a physical observable corresponds to free states of a system, while the pure point spectrum corresponds to bound states. The singular spectrum correspond to physically impossible outcomes. An example of a quantum mechanical observable which has purely continuous spectrum is the position operator of a free particle moving on a line. Its spectrum is the entire real line. Also, since the momentum operator is unitarily equivalent to the position operator, via the Fourier transform, they have the same spectrum.

Intuition may induce one to say that the discreteness of the spectrum is intimately related to the corresponding states being "localized". However, a careful mathematical analysis shows that this is not true. The following f is an element of L2() and increasing as x.

f(x)={nif x[n,n+1n4],0else.

However, the phenomena of Anderson localization and dynamical localization describe, when the eigenfunctions are localized in a physical sense. Anderson Localization means that eigenfunctions decay exponentially as x. Dynamical localization is more subtle to define.

Sometimes, when performing physical quantum mechanical calculations, one encounters "eigenvectors" that do not lie in L2(R), i.e. wave functions that are not localized. These are the free states of the system. As stated above, in the mathematical formulation, the free states correspond to the absolutely continuous spectrum. Alternatively, if it is insisted that the notion of eigenvectors and eigenvalues survive the passage to the rigorous, one can consider operators on rigged Hilbert spaces.

It was believed for some time that singular spectrum is something artificial. However, examples as the almost Mathieu operator and random Schrödinger operators have shown, that all types of spectra arise naturally in physics.

See also

References

  • N. Dunford and J.T. Schwartz, Linear Operators, Part I: General Theory, Interscience, 1958.
  • M. Reed and B. Simon, Methods of Modern Mathematical Physics I: Functional Analysis, Academic Press, 1972.